Tork Craft Flap Disc 115Mm 15 Deg.Angle 80Grit A/O

Description

A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.

SIZE: Ø115
GRIT: P80
SURFACE :15° conical

Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.

Description	Value
Size Ø	115mm
Grit	P80
Bore	22.23mm
Max RPM	13,300 rpm
Bevel	15°

Grit	Materials
24-40	Aluminium, soft non ferrous metals, wood and plastic
36-50	Unalloyed or low alloyed steels, and low tensile strength stainless steels
60	High-alloyed, stainless and tempering steels
80	High-alloyed steels and fine finish on all metals
120	For extra fine finish on all materials

To extend the service life on
a flap disc, lower the speed to half of the MAX rpm rated on the disc. This could extend the service life almost 100%. This can be accomplished by
using a variable speed angle grinder.

What is grit?

When talking about sandpaper ‘grit’ is a reference to the number
of abrasive particles per inch of sandpaper. The lower the grit the rougher the
sandpaper and conversely, the higher the grit number the smoother the sandpaper.

This make sense if you imagine how small the particles on an 1000-grit sandpaper
would need to be to fit into a 1′ square (25,4mm square). Sandpaper is referred
to by the size of its grit (Example 120-grit sandpaper or P120
sandpaper).

Flat or conical disc styles

Flat
The flap disc has a flat surface for maximum efficiency when used at 0-15°
angles. The flap disc is most suitable for grinding flat surfaces.

Conical
The flap disc has a slight conical surface for grinding at 10-25° angles.
The flap disc is most suitable for grinding contoured surfaces.