Tork Craft Hacksaw Blade Carbon Steel 32T X 300Mm

Description

Length: 300mm
Teeth per inch (TPI): 32

The blade fits in a hand-held hacksaw. The pins on either end are tensioned in the hacksaw before use. The blades
can be used to cut metals or plastics.

The blade can be mounted with the teeth facing towards or away from the handle, resulting in cutting action on
either the push or pull stroke.

Range:

The range of blades are available from 14 to 32 teeth per inch (TPI). The blade corresponds to the thickness of the
material being cut. There needs to be at least 3 teeth in the material at any time for the best result

Bi-metal vs. carbon steel hacksaw blades:

Carbon steel hacksaw blades are one of the very first hacksaw blades available. It is more flexible, but wears down
faster than bi-metal blades.

Application:

• 14 TPI – Non-ferrous metals plastics (8 – 12mmm thick)
• 18 TPI – Non-ferrous and plastics (5 – 10mm thick)
• 24 TPI – Non-ferrous metals and plastics (4 – 12mm thick)
• 32 TPI – Non-ferrous metals tubing and plastics(1 – 3mm thick)
• Ideal for construction and DIY.

TIP:
Cutting in the pull stroke increases the blade tension and will result in greater control of the cut and extends the life of the blade.

Description	Specification
Packaging Type	Hanging card
Material	Body: Carbon Steel
Full blade length	314 ±1mm
Blade width	12.70 ±0.5mm
Blade thickness	0.5mm
Pin hole diameter	4mm
Pin hole pitch	300mm
Length	300mm
Teeth per inch (TPI)	32

Features

• Carbon steel construction for increased flexibility.
• Wavy set teeth for better performance on soft metals and plastics.
• Shatterproof.
• Smooth cut finish.
• Universal fitment.