Tork Craft Hole Saw Hss 60Mm

Description

Hole saw diameter:
ø60mm

Application:

The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.

The hole saw can be used to cut into:

• Mild steel
• Cast iron
• Copper
• Aluminium
• Brass
• Alloy steel
• Fibre-reinforced plastic (FRP)

The pilot drill bits are available separately:

Using a hole saw:

To use a hole saw, you need the following accessories:

• A portable drill or stationary drill with a 3 jaw chuck.
• The necessary safety equipment. Safety goggles, gloves and hearing
  protection.

IMPORTANT:
For the best results and for safety reasons, use the recommended rotation
speed for the material being drilled into.

For longer hole saw life, use the following instructions:

1. Use the correct rotation speed. If the speed is too high or too low, it will
   have an effect on the cutting edge on the hole saw and decrease the life
   expectancy.
2. Clear away metal filings frequently to prevent the hole saw
   from overheating.
3. Always apply the necessary pressure for the intended use. Too much
   pressure can destroy the teeth when cutting in metals.
4. Keep the drill going straight to avoid binding the hole saw.

Rotation speed of hole saws (rpm):

consider safety for your health and the people around you
General safety suggestions: It is advisable to always have the following items nearby and in a good condition Eye protection – clean and scratch free Hearing protection – quality earmuffs Dust masks – discard old and dirty masks Gloves – for easy handling of material and hand protection
Wear Gloves	Eye Protection	Hearing Protection	Dust Mask