Tork Craft Hole Saw Hss 80Mm

Description

Hole saw diameter:
ø80mm

Application:

The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.

The hole saw can be used to cut into:

• Mild steel
• Cast iron
• Copper
• Aluminium
• Brass
• Alloy steel
• Fibre-reinforced plastic (FRP)

The pilot drill bits are available separately:

TC28650	HSS arbor drill bit 6x50mm
TC28860	HSS arbor drill bit 8x60mm

Using a hole saw:

To use a hole saw, you need the following accessories:

• A portable drill or stationary drill with a 3 jaw chuck.
• The necessary safety equipment. Safety goggles, gloves and hearing
  protection.

IMPORTANT:
For the best results and for safety reasons, use the recommended rotation
speed for the material being drilled into.

For longer hole saw life, use the following instructions:

1. Use the correct rotation speed. If the speed is too high or too low, it will
   have an effect on the cutting edge on the hole saw and decrease the life
   expectancy.
2. Clear away metal filings frequently to prevent the hole saw
   from overheating.
3. Always apply the necessary pressure for the intended use. Too much
   pressure can destroy the teeth when cutting in metals.
4. Keep the drill going straight to avoid binding the hole saw.

Rotation speed of hole saws (rpm):

DIA.	MILD STEEL	CAST IRON	BRASS	ALU.
Ø 14mm	580	400	790	900
Ø 16mm	550	365	730	825
Ø 17mm	500	330	665	750
Ø 19mm	460	300	600	690
Ø 20mm	435	290	580	660
Ø 21mm	425	280	560	635
Ø 22mm	390	260	520	585
Ø 24mm	370	245	495	555
Ø 25mm	350	235	470	525
Ø 27mm	325	215	435	480
Ø 29mm	300	200	400	450
Ø 30mm	285	190	380	425
Ø 32mm	275	180	360	410
Ø 33mm	260	175	345	390
Ø 35mm	250	165	330	375
Ø 37mm	240	160	315	360
Ø 38mm	230	150	300	345
Ø 40mm	220	145	290	330
Ø 41mm	210	140	280	320
Ø 43mm	205	135	270	305
Ø 44mm	195	130	260	295
Ø 46mm	190	125	250	285
Ø 48mm	180	120	240	270
Ø 51mm	170	115	230	255
Ø 52mm	165	110	220	245
Ø 54mm	160	105	210	240
Ø 57mm	150	100	200	225
Ø 59mm	145	100	195	225
Ø 60mm	140	95	190	220
Ø 64mm	135	90	180	205
Ø 65mm	130	85	175	200
Ø 67mm	130	85	170	195
Ø 68mm	130	85	170	195
Ø 70mm	125	80	160	185
Ø 73mm	120	80	160	180
Ø 76mm	115	75	150	170
Ø 79mm	110	70	140	165
Ø 83mm	105	70	140	155
Ø 86mm	100	65	130	150
Ø 89mm	95	65	130	145
Ø 92mm	95	60	120	140
Ø 95mm	90	60	120	135
Ø 98mm	90	60	120	135
Ø 102mm	85	55	110	130
Ø 105mm	80	55	110	120
Ø 108mm	80	55	110	120
Ø 111mm	80	50	100	120
Ø 114mm	75	50	100	105
Ø 121mm	70	45	95	95
Ø 127mm	65	45	90	90
Ø 133mm	65	45	90	90
Ø 140mm	60	40	85	85
Ø 146mm	60	40	85	85
Ø 152mm	55	35	75	75

consider safety for your health and the people around you
General safety suggestions: It is advisable to always have the following items nearby and in a good condition Eye protection – clean and scratch free Hearing protection – quality earmuffs Dust masks – discard old and dirty masks Gloves – for easy handling of material and hand protection
Wear Gloves	Eye Protection	Hearing Protection	Dust Mask