Tork Craft Rotary Hammer 800W Sds Tcrh0800 C/W 5Pc Sds Drill Bit Set X 3 Nr07305

Description

Tork Craft Rotary Hammer 800W SDS TCRH0800 With 3 x 5pc SDS Drill Bit Set NR07305

At a Glance: 800W SDS-plus rotary hammer with three 5-piece SDS masonry drill bit sets

The Tork Craft Rotary Hammer 800W SDS TCRH0800 With 3 x 5pc SDS Drill Bit Set NR07305 (TORKIT031) is a ready-to-work masonry drilling combo for serious DIYers and trades. The 800W SDS-plus rotary hammer delivers strong impact drilling in concrete, brick and stone, while the three NR07305 5-piece SDS drill bit sets keep you stocked up with popular SDS-plus sizes for common anchor and fixing holes. It is an ideal kit for installing plugs, anchors, conduits, trunking, brackets and general construction fixings on site or around the home.

Specifications

Features

• 800W rotary hammer TCRH0800 High-torque 800W motor designed for impact drilling into concrete, brick and stone with SDS-plus bits.
• SDS-plus chuck system Quick, tool-free bit changes with positive engagement for better power transfer and reduced bit slip.
• Impact drilling mode Hammer action helps the bit bite into tough masonry, making anchor holes faster and easier to drill.
• Variable speed trigger Lets you start holes gently and then pick up speed for efficient drilling through the material.
• Auxiliary side handle and depth stop Adjustable side handle and depth rod for better control and consistent hole depth.
• 3 x NR07305 5-piece SDS drill bit sets Three packs of SDS-plus masonry bits in useful sizes for common wall plugs and anchors.

Benefits

• Ready for masonry work: Machine and SDS-plus bits are supplied together, so you can start drilling straight away.
• Faster drilling in hard materials: Hammer action and SDS-plus drive help you drill concrete and brick much quicker than a standard drill.
• Less bit changing hassle: Push-in SDS-plus chuck makes it quick to swap sizes as you move between different fixings.
• Good value kit: Including three 5-piece SDS bit sets gives you a solid stock of the sizes you use most, saving repeat trips for consumables.
• Ideal for installation work: Perfect for plugs, anchors, brackets, trunking, shelves and general building and renovation tasks.

Extra Information

• Use the rotary hammer with SDS-plus masonry bits when drilling into concrete, brick, block and stone.
• The included NR07305 bit sets cover popular diameters typically used with common wall plugs and mechanical anchors.
• Switch to rotary-only mode (if available on the tool) when drilling through softer materials where hammer action is not required.
• For neat fixings, always match the bit size to the wall plug or anchor manufacturer’s recommendation.

Safety

• Wear eye, ear and dust protection when drilling into masonry and concrete.
• Check that the SDS-plus bit is fully locked into the chuck before starting the machine.
• Hold the tool firmly with both hands and keep a stable stance, especially when drilling overhead or into very hard material.
• Do not force the bit; allow the hammer action to do the work and back off if the bit starts to bind.
• Disconnect the tool from the power source before changing bits or making adjustments.