Aircraft Elbow W/O-Ring 6Mm-1/8 M Pu Hose Fitting
R20,00
AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting
At a Glance: 6mm push-in tube connection to 1/8" Male BSP thread with an O-ring seal in a compact 90° elbow.
Small fitting, big difference in tight pneumatic layouts. The AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting is a push-in elbow connector that lets you route 6mm tubing neatly around a corner while threading into a 1/8" BSP female port. The integrated O-ring helps improve sealing at the threaded connection (especially on suitable ports), making it a smart choice for compact air circuits on compressors, regulators, FRLs, manifolds and pneumatic tools where you want a cleaner, more reliable 90° connection.
Fast push-in tube connection paired with an O-ring at the thread to support a leak-resistant, professional finish in compact pneumatic installations.
Free shipping on orders over R2000!
- Satisfaction Guaranteed
- Quality Spares, Accessories & Tools
- Secure Payments
Description
AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting
At a Glance: 6mm push-in tube connection to 1/8" Male BSP thread with an O-ring seal in a compact 90° elbow.
Small fitting, big difference in tight pneumatic layouts. The AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting is a push-in elbow connector that lets you route 6mm tubing neatly around a corner while threading into a 1/8" BSP female port. The integrated O-ring helps improve sealing at the threaded connection (especially on suitable ports), making it a smart choice for compact air circuits on compressors, regulators, FRLs, manifolds and pneumatic tools where you want a cleaner, more reliable 90° connection.
Fast push-in tube connection paired with an O-ring at the thread to support a leak-resistant, professional finish in compact pneumatic installations.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SPL06-G01 |
| Product Type | Push-In Pneumatic Elbow Fitting (O-Ring Seal) |
| Tube Size | 6mm (OD) |
| Thread Type | BSP |
| Thread Size | 1/8" Male |
| Seal Type | O-Ring |
| Connection Angle | 90° Elbow |
| Typical Use | Compressed air / pneumatic tubing lines (PU/Nylon) |
Features
- Push-in 6mm tube connection Quick, tool-free tubing fitment for fast installs and maintenance.
- 1/8" Male BSP thread Fits common BSP threaded ports on pneumatic valves, regulators and manifolds.
- O-ring sealed thread Helps enhance sealing at the port face on compatible connections.
- 90° elbow design Routes tubing neatly in tight spaces and reduces tube stress and kinking.
Benefits
- Cleaner routing: Turns the line neatly at the port to keep installations tidy and compact.
- Reduced leak risk: O-ring support plus correct tube insertion helps improve sealing confidence.
- Less downtime: Push-in connection makes tube changes faster during servicing.
Extra Information
- Use with 6mm OD PU or nylon pneumatic tubing. For best sealing, cut the tube square and keep it clean.
- Thread check: This fitting is 1/8" Male BSP. Confirm your port is BSP (not NPT) before fitting.
- O-ring sealing works best on compatible ports. Depending on your equipment and sealing surface, a suitable thread sealant may still be required.
Pro Tip
- Before tightening, make sure the O-ring is seated properly and the port face is clean—tighten firmly but don’t overdo it, then leak-test with soapy water.
Safety
- Isolate and depressurise the air system before installing or removing pneumatic fittings.
- Wear eye protection when working with compressed air and pressurised lines.
- Do not over-tighten—excess force can damage threads, crush the O-ring or distort sealing surfaces.
- After installation, leak-test the joint before returning equipment to service.
- Use only within the rated limits of your pneumatic system and with compatible tubing/materials.
Additional information
| Weight | 0,02 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.