“Aircraft Air Impact Wrench 1/2′ 17 Piece Kit Single Hammer” has been added to your cart.
View cart
Showing 17–32 of 836 resultsSorted by latest
-
R2 374,05
Retractable air hose reel in plastic casing able to swivel on a wall mount.
The hose is quickly and properly reeled up after use by using an automatic winding system.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose in the workshop, just reel up the hose when finished working.
The swivel can rotate 180 degrees.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R2 273,78
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 – 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:
- 12V, 2000 mah
- Fully charge time: Around 4 hours
- Working time: 90 minutes
Spare battery –
SG COMP13-1
Airbrush not included.
-
R2 260,15
The compressor is designed to be small and compact using a 1/4 Hp motor to be able to inflate tyres up to a max pressure of 3.5 Bar (50 Psi).
The compressor is not suitable for airbrushing.
-
R2 089,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 800,25
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 725,34
The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber bumper is fitted to protect the wood surface. The nail gun has added
safety where it it will only drive-in a nail when the bumper is depressed
against the wooden surface.
Max length of nail: 50mm
Magazine capacity: 100 nails
Only use 16 Gauge nails.
-
R1 722,35
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy-duty ball bearing construction for improved lower vibration performance.
Includes a dust extraction port
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil.
Recommended replacement backing pad:
SPC00107
-
R1 662,50
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 614,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
-
R1 300,27
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2′ output shaft to deliver high-impact torque as much as 310
Newton-Meter.
A compressor is required with an airflow delivery of at least 228 l/min at
6.3 Bar to make use of the impact wrench.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Included in the kit:
- Impact sockets
- 9mm
- 10mm
- 11mm
- 13mm
- 14mm
- 17mm
- 19mm
- 22mm
- 24mm
- 27mm
- 125mm extension
- In-line lubricator (oiler)
- Connector (1/4′ NPT)
- Pneumatic oil
-
R1 274,62
AirCraft Air Brush Stand 6 Ports & Pressure Guage
At a Glance; Airbrush stand and manifold with 6 ports plus a built-in pressure gauge for an organised spray station
An airbrush bench gets chaotic fast: hoses everywhere, brushes rolling around, and pressure settings drifting into mystery territory. The AirCraft SG-BD-18 Air Brush Stand solves that with a clever two-in-one setup—part airbrush stand, part multi-port manifold. With 6 ports and an integrated pressure gauge, it helps you keep several airbrushes neatly stored and ready for action, while making it easier to manage your air supply for quick tool swaps and smoother workflow.
A cleaner, more controlled airbrush station in one unit
Store multiple airbrushes safely and keep your air outlets organised, so you can move between colours or brushes without constantly disconnecting and reconnecting your main air line.
-
R1 271,10
PTFE TAPE 19MMX0.1MMX40M IN DISPLAY BOX X60
-
R1 234,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 131,31
Professional pneumatic random orbital sander with Ø 50mm hook and loop sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 100 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing pad:
AT0020-01A
-
R1 126,56
AirCraft Airbrush Kit 0.2mm (SG A208)
At a Glance: Ultra-fine 0.2mm airbrush for crisp detail lines, tight control and smooth, delicate shading.
For the jobs where “close enough†isn’t close enough, the AirCraft SG A208 Airbrush Kit (0.2mm) steps in with precision-control spraying built for detail. A 0.2mm nozzle size is all about finesse—fine lines, subtle gradients, tight areas and delicate finishes on models, crafts and intricate touch-ups. When paired with properly thinned paint and a clean air supply, the SG A208 delivers smooth atomisation and controlled paint delivery so you can build colour gradually and keep your work sharp, neat and professional-looking.
Ultra-Fine Precision: a 0.2mm airbrush kit made for detail work and clean control
Smaller nozzles produce finer spray patterns, making them perfect for detailed shading and fine-line work. The trade-off is they demand cleaner paint, better thinning and a bit more cleaning discipline—so when you want top-tier detail, this is the tool that rewards you.
-
R1 121,62
AirCraft Sandblaster / Etcher / Eraser Kit Mini (SG A178)
At a Glance: Mini air eraser-style sandblaster with a ø 0.5mm nozzle for fine etching and precision cleaning.
Meet the small tool that punches way above its weight. The AirCraft SG A178 Sandblaster / Etcher / Eraser Kit Mini is a precision “air eraser†style sandblaster built for detail work—think glass etching with stencils, cleaning jewellery, and blasting grime off small, intricate parts where a full-size blaster would be overkill. With its fine ø 0.5mm nozzle and gravity-feed cup, it gives you controlled, accurate abrasion so you can clean, etch and prep without turning the job into a sandstorm.
Precision Micro-Blasting Control: a compact kit made for detail etching and fine-part cleaning
The SG A178 is designed for careful work—tight blast pattern, manageable media use, and a comfortable setup for short runs and touch-ups. Pair it with very fine blasting media and you’ve got a neat, controllable system for delicate surfaces and small components.
