Showing 337–352 of 785 resultsSorted by latest
-
R55,00
AirCraft Insert T-Joint PU 8mm (SG APBJ08)
At a Glance; 8 mm push-in tee connector for fast air line branching
The AirCraft SG APBJ08 Insert T-Joint PU 8mm is a tidy, time-saving way to split one pneumatic line into two. Designed for 8 mm tubing (commonly PU/nylon air line), this push-in tee fitting makes clean installs easy—push the tube in, route your branch, and you’re back in action with a secure connection that’s ideal for airbrush stations, small regulators, manifolds, and compact workshop air setups.
Quick-connect convenience in a compact tee
Built for everyday workshop use, this insert-style T-joint helps you create neat branches without complicated clamps or fiddly hose tails. The push-in collet design allows quick assembly and simple tube release when you need to adjust or service your line.
-
R55,00
AirCraft PU Fitting Straight Stud With O-Ring 12mm x 1/4" BSP Male (SG SPC12-G02)
At a Glance: 12mm push-in tube to 1/4" BSP Male (M) thread with O-ring seal
Make your pneumatic line setup faster and tidier with the AirCraft SG SPC12-G02 straight stud fitting. Designed to connect 12mm pneumatic tubing to a 1/4" BSP male threaded port, it combines a push-in collet for rapid tube installation with an O-ring seal to help reduce leaks at the port interface. It’s a reliable, workshop-friendly solution for compressors, regulators, manifolds and air distribution blocks where a straight, compact fitting keeps your system running smoothly.
Standout feauture or series/quality/range: O-ring sealed straight stud reliability
The integrated O-ring supports dependable sealing at the port face, helping minimise pressure loss and keeping your air system efficient—especially in busy workshop environments.
-
R54,00
E RING FOR SG LVLP SPRAY GUN
-
R54,00
AirCraft PU Hose Fitting Y Joint 10mm x 3/8" M BSP (SPX10-03)
At a Glance: Y-branch fitting with two 10mm push-in outlets and a 3/8" Male BSP threaded connection.
The AirCraft SPX10-03 PU Hose Fitting Y Joint 10mm x 3/8" M BSP is a compact, dependable way to branch a single threaded air port into two 10mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 10mm ports and a reliable 3/8" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 3/8" Male BSP thread
Push your 10mm hoses in to lock, then screw into a 3/8" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R54,00
AirCraft PU Fitting Straight Stud With O-Ring 12mm x 3/8" BSP Male (SG SPC12-G03)
At a Glance: 12mm push-in tube to 3/8" BSP Male (M) thread with O-ring seal
For a neat, straight-through connection that installs in minutes, the AirCraft SG SPC12-G03 is a solid choice. This fitting connects 12mm pneumatic tubing to a 3/8" BSP male threaded port using a push-in collet for quick tube installation and an O-ring to help seal at the port interface. It’s ideal for compressor plumbing, regulators, manifolds and air distribution blocks—anywhere you want reliable sealing and clean line routing without bulky hardware.
Standout feauture or series/quality/range: O-ring sealed straight stud efficiency
The integrated O-ring is designed to support a tighter seal where the fitting meets the port, helping reduce pressure loss and keeping your air system working efficiently.
-
R54,00
AirCraft PU Hose Fitting Tee 6mm x 1/4" F x 1/4" M (SG-APHF06-02)
At a Glance: 6mm Push-In Tube Port with 1/4" Female Thread x 1/4" Male Thread Tee
Create a neat, space-saving branch or adapter point in your air line system with the AirCraft SG-APHF06-02 PU hose fitting tee. This versatile tee combines a quick push-in port for 6mm pneumatic tubing with a 1/4" female thread and a 1/4" male thread—ideal for routing, splitting or adapting compressed-air connections on regulators, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Versatile Pneumatic Plumbing
With both male and female 1/4" threaded ends plus a 6mm push-in tube port, this fitting helps you build clean pneumatic layouts where installation space is tight and reliability matters.
-
R54,00
AirCraft PU Hose Fitting Tee 10mm x 10mm x 3/8" BSP (SG APD10-03)
At a Glance; 10 mm tube tee with 3/8" BSP male thread for strong, tidy air line branching
The AirCraft SG APD10-03 PU Hose Fitting Tee 10mm x 10mm x 3/8" BSP is a practical hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into a larger threaded port. With two 10 mm push-in tube ports and a 3/8" BSP male thread, it’s ideal for manifolds, valves, regulators and workshop air accessories—keeping your pneumatic layout compact, reliable and easy to maintain.
Hybrid tee: push-in tubing plus 3/8" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for stacked adaptors. Fewer joins means a cleaner install and fewer potential leak points across your air line.
-
R54,00
AirCraft PU Hose Fitting Tee 10mm x 10mm x 1/4" BSP (SG APD10-02)
At a Glance; 10 mm tube tee with 1/4" BSP male thread for neat air line branching
The AirCraft SG APD10-02 PU Hose Fitting Tee 10mm x 10mm x 1/4" BSP is a reliable hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into equipment with a threaded port. With two 10 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your pneumatic layout compact, tidy and easy to service.
Hybrid tee: push-in tubing plus 1/4" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means fewer potential leak points and a cleaner installation overall.
-
R54,00
AirCraft PU Hose Fitting Tee 10mm x 10mm x 1/8" BSP (SG APD10-01)
At a Glance; 10 mm tube tee with 1/8" BSP male thread for neat, compact air line branching
The AirCraft SG APD10-01 PU Hose Fitting Tee 10mm x 10mm x 1/8" BSP is a smart hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into a threaded port at the same time. With two 10 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating tubing runs into gauge blocks, compact valves, small manifolds and control components—keeping your air layout tidy, reliable and easy to maintain.
Hybrid tee: push-in tubing plus 1/8" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air system.
-
R54,00
AirCraft Reducing Manifold Brass 1/4" x 3/8" F/F (SB1249)
At a Glance: 1/4" to 3/8" female-to-female brass reducing manifold for stepping between air-line sizes
Air systems love mixing standards—right when you don’t have time for it. The AirCraft SB1249 brass reducing manifold is the tidy solution, giving you
a female-to-female (F/F) connector that steps from 1/4" to 3/8". It’s ideal for adapting mismatched pneumatic components on compressors,
regulators, filters, manifolds and general compressed-air plumbing without building an awkward stack of adaptors. Made from durable, corrosion-resistant
brass, it’s built for workshop reliability and a cleaner, more serviceable air-line layout.
AirCraft Brass Fittings – Neat Size Changes, Less Hassle
AirCraft brass fittings are designed for dependable compressed-air connections where sealing and longevity matter.
This reducing manifold bridges two common sizes in one compact, purpose-made connector.
-
R53,00
AirCraft Hose Tail Connector Brass – 1/4" Female x 10mm (SBF1259)
At a Glance: 1/4" Female Thread to 10mm Hose Tail in Solid Brass
When your air line setup calls for a slightly larger hose, the AirCraft SBF1259 gives you a clean, dependable connection between a 1/4" female threaded port
and a 10mm hose. The hose tail (barb) design helps the hose grip firmly from the inside, while the threaded end makes it easy to integrate into common pneumatic
and compressed air systems. Ideal for workshops, compressor lines, and custom hose builds where reliability matters.
Solid-brass AirCraft connector for secure 10mm hose-to-threaded joins
A practical fitting for everyday use: push the hose fully onto the 10mm tail, clamp it correctly, then thread the 1/4" female side onto a compatible adaptor,
coupler, regulator or manifold. Brass offers good corrosion resistance and keeps connections service-friendly over time.
-
R53,00
AirCraft Metal PU Fitting Straight 4mm x 1/4" Female (SG MPCF04-02)
At a Glance: Straight metal push-in fitting for 4mm tube to 1/4" female thread
The AirCraft SG MPCF04-02 Metal PU Fitting Straight is a compact, workshop-ready connector that makes pneumatic plumbing quick and tidy.
It allows you to connect 4mm pneumatic tubing directly into the push-in end while the 1/4" female threaded side mates with a compatible
male-threaded port or adapter. Ideal for compressors, air lines, manifolds, spray setups and general pneumatic systems where a clean, reliable
connection matters.
Fast-fit straight connector for clean pneumatic routing
Designed for simple installs and easy servicing, this straight fitting helps keep tubing runs neat, reduces clutter and supports dependable
airflow in compact workspaces.
-
R53,00
AirCraft PU Hose Fitting Y Joint 14mm (SPY14)
At a Glance: Push-in Y-splitter for 14mm PU hose—branch one line into two in seconds.
The AirCraft SPY14 PU Hose Fitting Y Joint 14mm is a clean, compact solution for splitting a single 14mm pneumatic line into two 14mm PU hose runs. It’s ideal for workshop air routing, pneumatic control circuits, and machine installations where you want a tidy branch line without piling on adaptors. With a push-in (one-touch) design, installation is quick—push the hose in to lock, and release when you need to re-route or service. The result is a neat, service-friendly air line layout that helps keep systems organised and running smoothly.
Standout feature: All-push-in 14mm Y splitter for quick, tidy branching
No threads, no fuss—just straightforward 14mm-to-14mm branching with push-in convenience for fast installs and easy changes.
-
R53,00
AirCraft PU Hose Fitting Reducer 14mm-12mm
At a Glance: Push-in reducer connector to step down from 14mm tube to 12mm tube.
When you’re running larger pneumatic lines and need a clean step-down connection, the AirCraft PU Hose Fitting Reducer 14mm-12mm (SPG14-12) keeps your layout tidy and reliable. This compact push-in reducer connector is designed to join a 14mm tube run to a 12mm tube run quickly and securely—ideal for workshop compressed-air distribution, machinery air feeds, and general pneumatic systems where neat routing and easy servicing make all the difference.
Standout feature: Clean 14mm-to-12mm transition with push-to-connect speed
Push the tubing in to lock it firmly, and use the release collar for fast tube removal (once depressurised) during maintenance or re-routing.
-
R53,00
AirCraft PU Hose Fitting Tee 14mm
At a Glance: Push-in tee connector for 14mm PU tubing – quick, tidy pneumatic branching.
For larger pneumatic lines that need a clean branch point, the AirCraft PU Hose Fitting Tee 14mm (SPE14) is a tough, tidy solution. This compact push-in tee connector allows you to split one 14mm PU hose into two runs, or join multiple lines where your compressed-air system needs a 3-way connection. Ideal for workshop air distribution, machinery air feeds, and pneumatic installations where dependable connections and quick maintenance keep the day moving.
Standout feature: Push-to-connect strength for clean 14mm line branching
Push the tube in to lock it securely, and use the release collar to remove tubing quickly (once the system is depressurised) when servicing or re-routing.
-
R52,00
AirCraft Connector German 10mm Hosetail 2pc Pack – SG11031P
At a Glance: German-style quick coupling plugs with 10 mm barbed hose tail (2pc pack)
The AirCraft SG11031P Connector (German profile) is the neat way to add German-style quick-connect convenience directly onto 10 mm hose lines—now in a practical two-piece pack. Each connector features a 10 mm hose-tail (barbed) end that grips inside the hose for a secure hold, making it ideal for workshop air lines, higher-flow tool drops, and pneumatic setups where you want fast connect/disconnect without extra adaptors. Pair with a compatible German quick coupler and you can connect and disconnect in seconds, helping keep air stations organised and work moving.
Standout feature: Direct-to-hose 10 mm hose-tail quick-connect plugs in a handy 2pc pack
Fit two hoses/tools or keep a spare ready—either way, you get quick-coupler speed with a compact, tidy hose connection.
