Showing 369–384 of 785 resultsSorted by latest
-
R51,00
AirCraft PU Hose Fitting Y Joint 10mm x 1/4" M BSP (SPX10-02)
At a Glance: Y-branch fitting with two 10mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX10-02 PU Hose Fitting Y Joint 10mm x 1/4" M BSP is a compact, dependable way to branch a single threaded air port into two 10mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 10mm ports and a reliable 1/4" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Push your 10mm hoses in to lock, then screw into a 1/4" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R51,00
AirCraft PU Hose Fitting Elbow With O-ring 10mm – 3/8" M BSP
At a Glance: 10mm push-in tube connection to 3/8" Male BSP thread with an O-ring seal in a compact 90° elbow.
A clean 90° turn with extra sealing support for larger pneumatic tubing. The AirCraft PU Hose Fitting Elbow With O-ring 10mm-3/8" M BSP connects 10mm pneumatic tubing to a 3/8" BSP female port using a fast push-in connection, keeping your air line routing neat and stress-free. The integrated O-ring supports sealing at the port face on compatible connections, helping reduce leak risk in compressors, FRLs, regulators, manifolds and pneumatic tool setups where space is tight and reliability matters.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal
Quick push-in tube connection paired with an O-ring at the thread to help deliver a tidy, leak-resistant finish in compact pneumatic installations.
-
R50,00
AirCraft Red Insert Straight PU 12mm – 10mm (SG APGJ12-10)
At a Glance; Reducing straight push-in connector for 12 mm to 10 mm pneumatic tubing
The AirCraft SG APGJ12-10 Red Insert Straight PU 12mm – 10mm is a tidy way to step down your air line from a high-flow 12 mm main run to a 10 mm tube without bulky adaptors. It’s ideal when you want the airflow capacity of a larger “backbone†line but need to connect to a slightly smaller circuit—such as a valve, cylinder feed, branch line, or air accessory. Push-in connections keep installation quick and clean, while the colour-coded red body makes reducers easy to identify in busy pneumatic layouts.
Standout feature: clean step-down from 12 mm to 10 mm
Keep longer runs on 12 mm to help reduce pressure drop, then reduce only where the 10 mm circuit begins. This keeps systems efficient, tidy, and easier to troubleshoot later.
-
R50,00
AirCraft Swivel Elbow PU 12mm x 1/4" Male (SG-APH12-02)
At a Glance: 12mm Push-In Tube x 1/4" Male Thread Swivel Elbow
For quick, tidy pneumatic installations with a common 1/4" port size, the AirCraft SG-APH12-02 swivel elbow fitting is a dependable choice. This one-touch push-in connector joins 12mm PU tubing to a 1/4" male threaded port, while the swivel elbow action helps the tube align naturally—reducing twist, kinks and strain for a cleaner air line setup that’s easy to service.
Swivel Elbow Flexibility for Clean Pneumatic Hose Routing
The 90° swivel design allows the tube to rotate for easier positioning during installation and maintenance. Ideal for compressed-air plumbing, regulators, valves and manifolds where neat routing and fast change-outs matter.
-
R50,00
AirCraft Pu Hose Fitting Manifold 8mm-6mm
At a Glance: 8mm supply manifold that distributes air to multiple 6mm push-in outlets for tidy pneumatic routing.
The AirCraft Pu Hose Fitting Manifold 8mm-6mm is built for those moments when your main air supply is beefier (8mm) but your distribution lines are a leaner 6mm. This compact push-to-connect manifold gives you a clean, reliable way to split compressed air into several take-off lines without stacking fittings and creating extra leak points. It’s a smart choice for workshop pneumatic layouts, spray/air control stations, and compact assemblies where neat routing and quick maintenance matter.
Standout feature: One-touch 8mm-to-6mm air distribution in a compact manifold body
Connect the 8mm supply and feed multiple 6mm lines from one tidy block—push-in ports make installation and line changes fast and frustration-free.
-
R50,00
AirCraft Metal PU Fitting Straight 8mm x 3/8" Male (SG MPC08-03)
At a Glance: 8mm push-in to 3/8" male straight metal pneumatic fitting for quick, secure compressed-air connections.
The AirCraft SG MPC08-03 Metal PU Fitting Straight 8mm x 3/8" Male is a durable connector for tidy, reliable pneumatic installations where you want a fast push-in tube connection with a larger threaded interface.
Designed for 8mm PU (polyurethane) air hose, this straight fitting is ideal for valves, regulators, air manifolds and general compressed-air plumbing—especially where 3/8" ports are used.
The metal body adds strength and longevity, while the push-in design makes installation and servicing quick and easy.
Quick-fit air line connections with metal durability
Push-in fittings help keep air lines neat and serviceable.
Insert the 8mm tube fully for a secure grip, then thread the 3/8" male end into the matching port for a compact, leak-resistant connection.
A handy spare for air tools, spray equipment and workshop pneumatic repairs.
-
R50,00
AirCraft PU Fitting Straight Stud With O-ring 10mm – 1/2" M BSP (SPC10-G04)
At a Glance: Push-in 10mm tube x 1/2" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC10-G04 straight stud fitting is built for clean, reliable pneumatic connections on larger ports—now with the added sealing advantage of an O-ring.
Push your 10mm PU tube into the quick-connect collar for a strong grip, then screw the 1/2" BSP male thread into your manifold, regulator block, compressor accessory port or pneumatic equipment.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter, cleaner 1/2" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—ideal for maintaining consistent airflow and reducing air loss on larger ports.
-
R50,00
AirCraft Brass Hose Tail Connector – 1/4" Female x 8mm (SBF1258)
At a Glance: 1/4" Female Thread x 8mm Hose Tail in Solid Brass
When you need a tidy, dependable connection between a threaded port and an 8mm hose, this AirCraft brass hose tail connector gets it done with zero fuss.
The hose tail (barb) grips the inside of the hose for a snug mechanical hold, while the 1/4" female thread makes it easy to integrate into common air line
and pneumatic setups. Perfect for quick repairs, new airline builds, and keeping your compressor lines neat and serviceable.
Solid-brass AirCraft connector for secure 8mm hose-to-threaded connections
Built for workshop practicality: a classic hose tail design that pairs best with a proper clamp, and a female threaded side that helps you connect to couplers,
regulators, manifolds or adapters. Brass resists corrosion well in typical shop environments and keeps fittings service-friendly over time.
-
R50,00
AirCraft Pu Hose Fitting Manifold 6mm-6mm
At a Glance: 6mm push-in manifold with inline 6mm connection plus 3x 6mm outlets for clean pneumatic distribution.
The AirCraft Pu Hose Fitting Manifold 6mm-6mm is the tidy way to split a single 6mm air line into multiple outputs without building a tower of tees. This compact push-to-connect manifold keeps your main 6mm line flowing through the body, while providing three additional 6mm push-in ports for take-off lines. It’s ideal for workshop pneumatic layouts, air control stations, and compact assemblies where you want fast installation, easy maintenance, and reliable, professional-looking hose routing.
Standout feature: Compact multi-port 6mm push-in distribution block
Push the tubing in to lock, press the collar to release—quick connections that keep your system neat and easy to service.
-
R49,00
AirCraft PU Hose Fitting Elbow 6mm-3/8" F BSP
At a Glance: 6mm push-in to 3/8" female BSP elbow—clean 90° routing with a larger threaded connection.
When you need compact 90-degree hose routing but a larger threaded port, the AirCraft PU Hose Fitting Elbow 6mm-3/8" F BSP delivers a neat and reliable connection. It accepts 6mm PU tubing via a quick push-in fitting and mates to compatible pneumatic components using a 3/8" female BSP thread. Ideal for compressed-air plumbing, pneumatic panels, manifolds, regulators and valves, this elbow design helps prevent kinks, reduces strain on tubing, and keeps your setup organised—especially where space is limited and hose runs need to behave.
Standout feature: Fast push-in install with a space-saving elbow and 3/8" F BSP port
A smart choice for tidy layouts—quick tube fitment plus a larger BSP connection for compatible pneumatic hardware.
-
R49,00
AirCraft Reducer 1/2" x 3/8" M/F Conical (SB1233)
At a Glance: 1/2" to 3/8" male/female conical reducer for neat pneumatic connections
Air systems are wonderfully simple… until two fittings disagree about what size they want to be. The AirCraft SB1233 conical reducer is your clean,
no-drama solution for stepping from a 1/2" connection down to 3/8" using a male/female (M/F) configuration. It’s ideal for compressors,
regulators, filters, spray equipment and general pneumatic plumbing where a compact adaptor keeps your setup tidy and serviceable. The conical sealing
style is designed to mate properly for a secure connection when installed correctly.
AirCraft Pneumatic Fittings – Practical Solutions For Real Workshops
AirCraft fittings are made to help you build a reliable compressed-air setup with sensible, compatible connections.
This reducer is a quick way to bridge sizes without replacing your existing hoses or components.
-
R49,00
AirCraft PU Hose Fitting Elbow With O-ring 10mm-1/4" M BSP
At a Glance: 10mm push-in tube connection to 1/4" Male BSP thread with an O-ring seal in a compact 90° elbow.
A clean corner turn with extra sealing support for larger pneumatic tubing. The AirCraft PU Hose Fitting Elbow With O-ring 10mm-1/4" M BSP connects 10mm pneumatic tubing to a 1/4" BSP female port using a fast push-in connection, giving you a tidy 90° elbow right at the port. The integrated O-ring supports sealing at the port face on compatible connections, helping reduce leak risk on compressors, regulators, FRLs, manifolds and pneumatic tool systems where space is tight and reliability matters.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal
Quick push-in tube connection paired with an O-ring at the thread to help deliver a tidy, leak-resistant finish in compact pneumatic installations.
-
R48,00
AirCraft PU Hose Fitting 4-Way Connector 12mm (SG APZ12)
At a Glance: Push-in 4-way cross connector for 12 mm pneumatic tubing
Bring order to busy air-line setups with the AirCraft SG APZ12 PU Hose Fitting 4-Way Connector (12mm). This compact push-to-connect cross fitting allows you to split, join or re-route airflow across four 12 mm tube runs in one neat junction. It’s a solid choice for workshop compressed-air distribution, pneumatic circuits and general air-line management where you want clean routing without bulky manifolds. Push the tubing in to lock it securely, and use the release collars when it’s time to adjust or service the system.
Space-Saving 12mm 4-Way Push-In Connector For Tidy Pneumatic Builds
The SG APZ12 cross connector helps you keep larger-bore pneumatic lines organised while maintaining a compact footprint. It reduces extra adaptors, simplifies routing, and makes future changes quicker and cleaner.
-
R48,00
AirCraft Reducing Manifold 1/8" x 3/8" F/F (SB1247P) 1 Piece Pack
At a Glance: 1/8" to 3/8" female-to-female reducing manifold for stepping between air-line sizes
Air systems don’t always follow a single neat standard—sometimes you’ve got a small port on one component and a larger fitting on the next.
The AirCraft SB1247 reducing manifold is the tidy solution, giving you a female-to-female (F/F) connection that steps from 1/8" to 3/8".
It’s ideal for adapting mismatched pneumatic components on compressors, regulators, filters, manifolds and general compressed-air plumbing without
building an awkward stack of adaptors. Designed for practical workshop use, this connector helps keep your air-line layout compact, serviceable and
leak-conscious when installed correctly.
AirCraft Pneumatic Fittings – Simple Adaptors That Keep Systems Running
AirCraft fittings are made to help you create dependable compressed-air connections with cleaner layouts and fewer leak points.
This reducing manifold bridges two common sizes in one compact fitting.
-
R48,00
Inlet: 1/4"F – BSP
Max valve diameter: 8mm
<!-- ![]()
-->
This Lock On Tyre Chuck is a high-quality, durable chuck designed for quick and easy connection of air hoses to tire
valves. Its 1/4"F quick connect fitting ensures a secure and leak-free connection, while the robust
construction guarantees long-lasting performance even under demanding conditions. This chuck is ideal for
professional tire technicians and DIY enthusiasts alike, offering convenience and reliability for all your tire
inflation needs.
Application:
- Connecting to tyre valves to inflate or deflate.
- Automotive
- DIY
-
R48,00
AirCraft Red Insert Straight PU 12mm – 6mm (SG APGJ12-06)
At a Glance; Reducing straight push-in connector for 12 mm to 6 mm pneumatic tubing
The AirCraft SG APGJ12-06 Red Insert Straight PU 12mm – 6mm is a clean, space-saving way to step down your air line from a high-flow 12 mm main run to a 6 mm tube. It’s ideal when you want the airflow capacity of a larger “backbone†line but need to connect to compact valves, cylinders, pilot lines, gauges, or smaller pneumatic accessories. Push-in connections keep installation quick and tidy, while the colour-coded red body makes reducers easy to identify in busy pneumatic layouts.
Standout feature: big-to-small transition without extra adaptors
Keep longer runs on 12 mm to help reduce pressure drop, then reduce to 6 mm only where the smaller circuit begins. This keeps systems efficient, neat, and far easier to troubleshoot later.
