Showing 17–32 of 52 resultsSorted by latest

  • Kreg Kreg Deck Jig System

    Kreg Kreg Deck Jig System

    R1 175,10

    Deck Jig™

    Create a better, more beautiful deck

    Create a better, more-beautiful deck with the Kreg® Deck Jig™. This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws.

    The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly—whether you’re using solid-wood or composite deck boards.

    The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guides — one at 90° to the board edge, and two at opposing 45° angles — that allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures perfect drilling depth.

    After drilling, just drop a Kreg Deck Screw — an integral part of this concealed-fastening system — into the same guide, and then drive it with the included square-drive driver bit. It’s equipped with a stop collar, too, to ensure that the self-tapping, case-hardened screw gets driven to the perfect depth. The aggressive threads bite securely into the joist while the smooth upper shank and flat-bottom head work together to pull the deck board tightly into place.

    The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood—kiln—dried after treatment (KDAT) recommended.

    To ensure that you use the proper screws for your deck build, visit our Screw Selector to select the right type of screw for your application.

    Add to cartDone
  • Kreg Kreg Automax 90 Degree Corner Clamp

    Kreg Kreg Automax 90 Degree Corner Clamp

    R1 171,92

    90° Corner Clamp

    The Kreg® 90° Corner Clamp gives you the helping hand you need to hold 90° corners and ‘T’ joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° Corner Clamp leaves both of your hands free to add your fasteners. The 90° Corner Clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.

    The 90° Corner Clamp helps hold assemblies like boxes, cabinets, drawers, and cases together to ensure that you get strong, tight-fitting assemblies — whether you’re using Kreg pocket-hole joinery, or another method. The clamp’s V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg Screws, or even another type of fastener, such as a nail or wood screw.

    The 90° Corner Clamp features all-metal construction, including cast-aluminum pads — an outer ‘V’ and inner wedge — that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases.

    Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you’re using thin plywood for drawers, or materials up to 1′ thick.

    Add to cartDone
  • Kreg Kreg Straight Edge Guide Cut Up To 1220Mm

    Kreg Kreg Straight Edge Guide Cut Up To 1220Mm

    R1 144,23

    Straight Edge Guide

    Make perfectly straight cuts up to 4 feet in sheet goods with guided cutting
    Cut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 4 feet and get the cuts you need — whether you’re using a circular saw, jigsaw, or trim router. (Works with most brands.)

    The Kreg Straight Edge Guide offers an intuitive and approachable way to break down sheet goods. Your saw rides against the aluminum guide, allowing you to make straight and precise cuts. Guided cutting makes it easier than ever to see exactly where you’ll cut so you can get the results you expect.

    First, align your cuts quickly and precisely with the cutline indicators. Cutline indicators make alignment to your pencil marks easy, so you can work confidently knowing you’ll make the cut exactly where you need it. Then secure the guide to your material using the low-profile GripMaxx™ clamps that are built right into the guide. And now you’re ready to make a cut!

    The Straight Edge Guide Extension is available in 2-foot sections for projects that require greater cutting capacity. The Straight Edge Guide XL is also available for cuts in material up to 8 feet.

    Add to cartDone
  • Kreg Kreg True Flex Featherboard - Twin Pack

    Kreg Kreg True Flex Featherboard – Twin Pack

    R1 044,34

    True-FLEX™ Featherboard – Twin Pack

    The True-FLEX™ Featherboard gets its name from the careful engineering that went into its design. Many Featherboards on the market today apply too much pressure or not enough pressure to the workpiece, which results in imperfect cuts and less than safe operation.

    The True-FLEX™ Featherboard provides a consistent and optimum pressure, and will stand up to years of heavy use in your woodshop. The Featherboard is made from an extremely durable plastic composite body and includes a Wedge-Lock™ System that allows the Featherboard to be secured to a variety of shop tools without the need for additional hardware.

    Whether you’re using a miter slot or a T-slot, working on a table saw or a router table, the Wedge-Lock™ System adjusts accordingly and lets you work with confidence. Designed for use in standard 3/8′ x 3/4′ (9mm x 19mm) miter slot..

    Add to cartDone
  • Kreg Kreg Automax Face Clamp

    Kreg Kreg Automax Face Clamp

    R1 033,32

    Wood Project Clamp – 3′

    Quick, Convenient Clamping with Automatic Adjustment
    Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes — 3′ reach and 6′ reach — these versatile clamps have large clamp faces that distribute clamping force evenly and won’t mar delicate surfaces. They are compatible with the Kreg Pocket-Hole Jig, R3’s, Clamp Pad Adapter and the Kreg Pocket-Hole Jig Portable Base.

    Auto-Adjust Technology
    Thanks to Automaxx® auto-adjust technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2′ plywood without ever readjusting the clamp.

    Easy-to-Regulate Clamping Pressure
    Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.

    Highly-Durable Construction
    Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.

    Add to cartDone
  • Kreg Kreg Automax Face Clamp

    Kreg Kreg Automax Face Clamp

    R1 033,32

    Wood Project Clamp – 3′

    Quick, Convenient Clamping with Automatic Adjustment

    Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes — 3′ reach and 6′ reach — these versatile clamps have large clamp faces that distribute clamping force evenly and won’t mar delicate surfaces. They are compatible with the Kreg Pocket-Hole Jig, R3’s, Clamp Pad Adapter and the Kreg Pocket-Hole Jig Portable Base.

    Auto-Adjust Technology

    Thanks to Automaxx® auto-adjust technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2′ plywood without ever readjusting the clamp.

    Easy-to-Regulate Clamping Pressure

    Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.

    Highly-Durable Construction

    Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.

    Add to cartDone
  • Kreg Kreg Rip-Cut Metric

    Kreg Kreg Rip-Cut Metric

    R1 026,19

    Rip-Cut™

    Turn an ordinary circular saw into a precision edge-guided cutting tool
    Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide.

    The Kreg® Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.

    The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want — up to 24′ — using the built-in measuring scale, and then make your cut.

    With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.

    The Rip-Cut is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24′) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.

    Add to cartDone
  • Kreg Micro Pocket Drill Guide Kit 730 For 700 Series

    Kreg Micro Pocket Drill Guide Kit 730 For 700 Series

    R963,73

    Kreg Micro-Pocket™ Drill Guide Kit 730

    Use your 700-Series Pocket-Hole Jig to create compact pocket holes
    This unique Micro-Pocket™ Drill Guide Kit creates a 25% smaller pocket hole that works great for smaller projects, thinner stock, and tighter repairs.

    Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2′ (12mm) thick material and narrow stock, down to 1′ (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.

    Just insert the Micro-Pocket™ Drill Guide block into your Pocket-Hole Jig 720 or 720PRO, then use the Micro-Pocket™ drill bit to create the compact pocket holes.

    For use with 700-Series Pocket-Hole Jigs. Compatible with Kreg® pan-head pocket-hole screws.

    Add to cartDone
  • Kreg Micro Pocket Drill Guide Kit 530 For 500 Series

    Kreg Micro Pocket Drill Guide Kit 530 For 500 Series

    R963,73

    Kreg Micro-Pocket™ Drill Guide Kit 530

    Use your 500-Series Pocket-Hole Jig to create compact pocket holes
    This unique Micro-Pocket™ Drill Guide Kit creates a 25% smaller pocket hole (15/16′ long) that works great for smaller projects, thinner stock, and tighter repairs.

    Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2′ (12mm) thick material and narrow stock, down to 1′ (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.

    Just insert the Micro-Pocket™ Drill Guide block into your Pocket-Hole Jig 520PRO, then use the Micro-Pocket™ drill bit to create the compact pocket holes.

    For use with 500-Series Pocket-Hole Jigs. Compatible with Kreg® pan-head pocket-hole screws.

    Add to cartDone
  • Kreg Kreg Automax Large Face Clamp

    Kreg Kreg Automax Large Face Clamp

    R885,13

    Wood Project Clamp – 6′

    Quick, Convenient Clamping with Automatic Adjustment
    Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes (6′ reach and 3′ reach) these versatile clamps have large clamp faces that distribute clamping force evenly and won’t mar delicate surfaces. They are compatible with the Kreg Pocket-Hole Jig R3’s Clamp Pad Adapter, 300-Series Pocket-Hole Jigs and with the Kreg Pocket-Hole Portable Base.

    Auto-Adjust Technology
    Thanks to Automaxx® Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2′ plywood without ever readjusting the clamp.

    Easy-to-Regulate Clamping Pressure
    Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.

    Highly-Durable Construction
    Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.

    Add to cartDone
  • Kreg Kreg Custom Pocket Hole Plug Cutting Bit - Heavy Duty

    Kreg Kreg Custom Pocket Hole Plug Cutting Bit – Heavy Duty

    R859,08

    Custom Plug Cutting Bit – HD

    The Custom Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Kreg Jig® HD (Heavy-Duty) pocket holes.

    Add to cartDone
  • Kreg Kreg Cabinet Hardware Jig

    Kreg Kreg Cabinet Hardware Jig

    R841,48

    Cabinet Hardware Jig

    Install knobs and pulls with easy, repeatable accuracy

    The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time.

    Perfect for new construction and for refreshing entire rooms.

    Whether you’re updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps —​ and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently.

    The Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.

    The Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16′, bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes — whether you’re drilling one, a few, or hundreds.

    3/16′ (5mm) drill bit required is not included.

    Add to cartDone
  • Kreg Kreg Cabinet Hardware Jig

    Kreg Kreg Cabinet Hardware Jig

    R840,80

    Cabinet Hardware Jig

    Install knobs and pulls with easy, repeatable accuracy

    The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time.

    Perfect for new construction and for refreshing entire rooms.

    Whether you’re updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps —​ and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently.

    The Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.

    The Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16′, bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes — whether you’re drilling one, a few, or hundreds.

    3/16′ (5mm) drill bit required is not included.

    Add to cartDone
  • Kreg Kreg Drawer Slide Jig

    Kreg Kreg Drawer Slide Jig

    R839,83

    Drawer Slide Jig

    Install drawer slides the fast, easy way for drawers that fit perfectly and slide smoothly

    The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to-use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer.

    Plus, the Jig works with ball-bearing, epoxy-coated, and under-mount slides for perfect positioning every time.

    The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet and to support the drawers as you attach the slides to them. The jig is simple to use, and it ensures that every drawer fits right and operates smoothly.

    Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight and positioned properly, or the drawers won’t operate well. The Drawer Slide Jig takes the guesswork out of the process by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.

    The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly.

    The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet — one on each cabinet side — and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. The Drawer Slide Jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and under-mount slides.

    The Drawer Slide Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides fast, consistent results.

    Add to cartDone
  • Kreg Kreg Face Clamp 3' Reach

    Kreg Kreg Face Clamp 3′ Reach

    R819,65

    Classic 3′ Face Clamp

    A Great Clamp for Kreg Joinery and More

    This Classic Face Clamp offers increased reach and clamping capacity. Features a 3′ reach and clamps materials up to 2 3/4′ thick.

    Classic Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly, and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the ‘show’ side of the joint.

    Classic Face Clamps are available in two sizes: 2′ reach and 3′ reach. Both have a simple screw that adjusts the clamp to match material thickness, plus comfortable padded handles. Both are compatible with the Pocket-Hole Jig R3’s Clamp Pad Adapter and 300-Series Pocket-Hole Jigs.

    Add to cartDone
  • Kreg Kreg Custom Pocket Hole Plug Cutting - Bit Micro

    Kreg Kreg Custom Pocket Hole Plug Cutting – Bit Micro

    R798,50

    Custom Plug Cutting Bit – Micro

    The Custom Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Micro-Pocket™ pocket holes.

    Add to cartDone

Powered by
►
Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.
None
►
Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.
None
►
Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.
None
►
Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.
None
Powered by