“Aircraft Air Canister Cap” has been added to your cart.
View cart
Showing 1–16 of 26 resultsSorted by latest
-
R3 348,56
AirCraft SG-COMP13 Mini Air Battery Compressor & A130 Airbrush Kit
At a Glance: All-in-one portable airbrush kit with battery mini compressor, A130 airbrush, paints, stencils and carry case.
The AirCraft SG-COMP13 is a compact, go-anywhere airbrush kit built for clean, controlled spraying without needing a big workshop compressor.
You get a battery-powered mini air compressor paired with an A130 airbrush, plus a handy selection of paints and stencils so you can start creating straight away.
Ideal for hobby work, crafts, touch-ups, models, signage-style details and creative finishes—this kit is all about neat application, smoother gradients, and better control than brushes or aerosols.
Portable Airbrush Freedom: SG-COMP13 Makes Neat Spraying Simple
When you want controlled spray work without dragging out heavy gear, a mini battery compressor and airbrush combo is the sweet spot.
Pack it in the carry case, set up in minutes, and spray with precision—perfect for detail work, patterns, and consistent coverage.
Included in the kit:
- Aluminium case
- (x5) paints
- 12V battery airbrush compressor
- (x6) stencils
- Airbrush
- Filter
- Wrench/spanner
- Eye dropper to transfer paint to airbrush
-
R2 451,81
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 – 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:
- 12V, 2000 mah
- Fully charge time: Around 4 hours
- Working time: 90 minutes
Spare battery –
SG COMP13-1
Airbrush included
-
R2 260,15
The compressor is designed to be small and compact using a 1/4 Hp motor to be able to inflate tyres up to a max pressure of 3.5 Bar (50 Psi).
The compressor is not suitable for airbrushing.
-
R569,87
AirCraft Replacement Cup For The SG-A330 (SG-A330-1)
At a Glance: Replacement paint cup designed to fit the AirCraft SG-A330 spray gun
A spray gun cup takes a beating—solvents, drops, over-tightening, dried paint… it all adds up. The AirCraft SG-A330-1 Replacement Cup is the straightforward fix
for a damaged, leaking or paint-contaminated cup on your SG-A330 spray gun. Swap it in to restore neat paint handling, smoother workflow, and the confidence that
your gun is feeding properly for consistent spray results.
Fresh cup, clean feed, better spraying – the SG-A330-1 replacement cup
Keeping your paint path clean is one of the easiest ways to improve finish quality. A replacement cup helps you avoid contamination, reduces messy leaks,
and makes clean-up simpler—especially when you’re switching products or colours and want a reliable, workshop-ready setup.
-
R475,45
AirCraft Solenoid Valve SG-COMPSP-12 For Comp 05, Comp06 And Comp07
At a Glance: Electrically actuated replacement solenoid valve with pre-wired leads for AirCraft Comp 05/Comp06/Comp07.
The AirCraft SG-COMPSP-12 Solenoid Valve is an electrically controlled air valve used on the AirCraft Comp 05, Comp06 and Comp07 mini compressor range.
A solenoid valve opens and closes an internal air passage when it receives an electrical signal—helping manage airflow, automation functions, and correct system behaviour during operation.
If your compressor is acting up with inconsistent air control, delayed operation, or you suspect a valve is not opening/closing cleanly, replacing the solenoid valve with the correct AirCraft part is often the quickest route back to smooth, predictable performance.
Reliable Air Control for Mini Compressors: the SG-COMPSP-12 Solenoid Valve
This valve is designed as a service replacement component for compatible AirCraft mini compressor assemblies.
Match the Cat No. SG-COMPSP-12 to ensure correct fitment for Comp 05, Comp06 and Comp07.
-
R411,40
AirCraft Regulator and Filter for All Mini Comp 1/4" x 1/8" M (SG COMPSP-06A)
At a Glance: Compact regulator + moisture filter with gauge, 1/4" x 1/8" male connections
The AirCraft SG COMPSP-06A Regulator and Filter is a compact, practical upgrade for mini compressor air lines where clean, stable air makes all the difference. It combines an adjustable pressure regulator with a moisture/filter bowl and an easy-to-read gauge, helping reduce condensation carry-over while giving you better control of working pressure. Ideal for airbrush work and light spray applications, it helps deliver steadier airflow and more consistent results—especially when you’re chasing a smooth finish.
Cleaner Air + Steadier Pressure For Better Control
Moisture in the line and fluctuating pressure can ruin a good spray session fast. The SG COMPSP-06A helps trap condensation in the bowl and lets you dial in pressure accurately, giving your tool a more consistent air supply.
-
R75,00
AirCraft Right Angle Coupling SG-COMPSP-14 For Comp06 And Comp07
At a Glance: 90° threaded right-angle coupling (male to female) for compact air line routing on Comp06/Comp07.
The AirCraft SG-COMPSP-14 Right Angle Coupling is a practical 90-degree elbow fitting designed for AirCraft Comp06 and Comp07 mini compressor assemblies.
When space is tight, a straight fitting can force hoses to bend sharply or sit awkwardly against the body of the compressor. This right-angle coupling reroutes the air line neatly, helping reduce hose strain, improve layout, and create a cleaner, more secure connection.
If you’re replacing a damaged fitting, fixing a leak, or restoring the correct factory setup, this coupling is the tidy solution that makes everything sit right.
Neat Air Line Routing in Tight Spaces: the SG-COMPSP-14 90° Coupling
A right-angle coupling helps prevent kinks, reduces stress on threads and hoses, and supports a more reliable seal.
Match the Cat No. SG-COMPSP-14 to your unit to ensure correct fitment for Comp06 and Comp07.
-
R75,00
AirCraft Cylinder SG-COMPSP-02 For All Mini Compressors
At a Glance: Replacement cylinder sleeve for AirCraft mini compressors—helps restore strong compression and smooth pumping.
The AirCraft SG-COMPSP-02 Cylinder is a replacement cylinder sleeve used in AirCraft mini compressor units.
Inside a compressor, the cylinder is where the piston does its work—building pressure with each stroke. Over time, wear, scoring, heat, or contamination can reduce sealing and efficiency, leading to weak output, longer run times, and inconsistent performance.
Swapping in a fresh cylinder is one of the core service repairs that can bring a mini compressor back to life—restoring smoother operation and better pressure generation for the tools or airbrush work it supports.
The Heart of Compression: the SG-COMPSP-02 Mini Compressor Cylinder
A healthy cylinder surface supports good piston sealing, efficient pumping, and stable performance.
This part is listed as suitable for all AirCraft mini compressors—always confirm fitment by part number before installation.
-
R58,00
AirCraft Air Canister Cap
At a Glance; Replacement cap for compatible air canisters to protect threads and keep the system sealed
Caps are the unsung heroes of clean, leak-free gear: they keep threads protected, seals cleaner, and dust out of places it doesn’t belong. The AirCraft SG-BD-48 Air Canister Cap is a replacement cap designed for compatible air canister systems used in airbrushing and light pneumatic applications. It’s ideal for replacing a missing or damaged cap, helping keep your canister connection protected during storage and transport, and reducing the risk of contamination or damage that can lead to leaks.
Simple protection that helps prevent leaks and thread damage
By shielding the connection point, a proper cap helps keep dirt out, protects sealing surfaces, and reduces wear on threads—small details that make equipment last longer.
-
R54,00
AirCraft Front And Rear Bearing SG-COMPSP-05 For All Mini Compressors
At a Glance: Replacement front and rear bearing set for AirCraft mini compressors—helps bring back smooth, quiet operation.
The AirCraft SG-COMPSP-05 Front And Rear Bearing set is a service replacement for AirCraft mini compressors, designed to support the rotating shaft/motor assembly and keep everything running smoothly.
Bearings do a tough job in a small compressor—high speed, heat, vibration, and long run times. When they start to wear, you’ll often hear it first: grinding, whining, rattling, or a rough feel when the shaft turns.
Replacing worn bearings can restore smooth movement, reduce noise, and help prevent further damage to the motor or compressor mechanism—making this one of the most valuable “prevent bigger problems†spares in a mini compressor rebuild.
Smoother Running Starts With the Right Support: SG-COMPSP-05 Bearing Set
A good bearing set reduces friction and keeps the rotating assembly properly aligned. This helps the compressor run more efficiently, with less heat and less vibration.
Listed as suitable for all AirCraft mini compressors—always confirm by part number before ordering.
-
R157,00
AirCraft O-ring Set For SG A800 (SG A800-01)
At a Glance: Replacement O-ring set for SG A800—refreshes seals to help stop leaks and keep performance consistent.
O-rings are the tiny seals that quietly keep everything working… until they don’t. The AirCraft SG A800-01 O-ring Set is designed for the SG A800 and replaces worn, flattened or cracked seals that can cause air leaks, inconsistent operation and general “why is this thing behaving like that?†moments. Whether you’re doing preventative maintenance or fixing a leak, this O-ring set helps restore airtight performance, improves reliability and keeps your SG A800 running smoothly.
Seal Refresh Reliability: the O-ring set that helps your SG A800 run tight and consistent
Over time, heat, friction and cleaning chemicals can harden or damage O-rings. Replacing them helps re-establish proper sealing, reduces pressure loss and improves consistent operation across the tool/system.
-
R157,00
AirCraft Complete O-ring Set For SG A330 (SG A330-2)
At a Glance: Complete O-ring replacement set for SG A330—refreshes seals to stop leaks and restore consistent performance.
When a tool starts losing its “tightness†— air leaks, inconsistent performance, or seals that feel tired — O-rings are usually the quiet villains. The AirCraft SG A330-2 Complete O-ring Set is a full seal refresh pack for the SG A330, designed to replace worn, flattened or cracked O-rings throughout the unit. Fresh O-rings help restore airtight operation, improve consistency and reduce air loss, making this kit an excellent choice for preventative maintenance or for bringing a leaking SG A330 back to proper working condition.
Full Seal Refresh Reliability: a complete O-ring set that helps your SG A330 run like it should
O-rings are wear parts. Heat, time, friction and cleaning chemicals can harden or damage them, causing leaks and unpredictable behaviour. Replacing the full set helps re-establish proper sealing across the system for smoother, more reliable operation.
-
R157,00
AirCraft O-ring Set For SG-182 / SG-182A / SG-184 (SG-A182-A-184)
At a Glance: O-ring replacement set compatible with SG-182, SG-182A & SG-184 Airbrushs
A Airbrush can look perfect on the outside and still misbehave if the seals are tired. The AirCraft SG-A182-A-184 O-ring Set is the practical fix for worn
sealing points on SG-182, SG-182A and SG-184 Airbrushs—helping prevent air leaks, paint seepage and pressure inconsistency that can ruin an otherwise good finish.
Whether you’re doing preventative maintenance or chasing down a leak, this O-ring set helps restore smooth operation and reliable spray performance.
Dedicated seal refresh for AirCraft SG-182 / SG-182A / SG-184 Airbrushs
O-rings do the quiet work: sealing joints, keeping pressure stable, and helping controls move smoothly. Replacing worn O-rings is one of the simplest,
most cost-effective ways to keep a Airbrush dependable—especially if it sees frequent cleaning and regular use.
-
R157,00
AirCraft O-ring Kit For SG-A137 (SG-A137-01)
At a Glance: Complete O-ring replacement kit for AirCraft SG-A137 spray gun sealing points
A spray gun depends on tight sealing to keep pressure stable and paint flowing where it should. The AirCraft SG-A137-01 O-ring Kit is a practical service solution
for refreshing worn seals on your SG-A137 spray gun, helping prevent air leaks, paint seepage and inconsistent spray performance. Whether you’re doing preventative
maintenance or fixing a troublesome leak, this kit helps restore smooth operation and reliable results.
Dedicated seal service kit for the SG-A137 spray gun
O-rings are small parts with a big job—keeping joints sealed, controls moving smoothly and pressure behaving properly. Replacing tired O-rings is one of the
simplest ways to improve reliability, especially on spray guns that are used often or cleaned regularly with solvents.
-
R119,00
AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery of spitting, uneven lines, and “why is it doing that?†frustration.
The AirCraft SG NE02 is a replacement 0.3mm needle designed for the A130 (and compatible A180) airbrush setup, helping restore clean paint delivery, smoother trigger response, and a more predictable spray pattern.
It’s the right spare to keep your airbrush performing like it should—especially for fine detail work and controlled finishing.
Standout feature: Restores fine-line performance on A130 0.3mm setups
Replace a worn or damaged needle to recover smoother flow, better control, and a cleaner spray pattern—especially when detail work starts looking fuzzy or inconsistent.
-
R119,00
AirCraft Needle For A182 0.5mm (SG NE01)
At a Glance: Replacement needle for AirCraft Airbrush A182 0.5mm setup—brings back smooth flow and consistent spray control.
A needle is the quiet hero of a good spray finish: when it’s bent, worn, or nicked, your pattern starts misbehaving and your day gets longer.
The AirCraft Airbrush SG NE01 is a replacement 0.5mm needle made for the Airbrush A182 setup, helping restore clean, controlled paint delivery and predictable trigger response.
Perfect for routine maintenance, tune-ups, or keeping a spare on hand so you can get back to spraying instead of troubleshooting.
Standout feature: Restores spray consistency on an Airbrush A182 0.5mm setup
Swap the needle to recover smoother flow, better control, and a more reliable spray pattern—especially when performance drops due to wear or accidental tip damage.
Tork Craft Deep Offset Combination Spanner 41Mm 
Tork Craft Slogging Spanner 60Mm Open End Crv 
Tork Craft Deep Offset Combination Spanner 36Mm 
Tork Craft Combination Spanner 50Mm 
Fixman 11Pcs Combination Spanner Set 8-9-10-11-12-13-14-15-17-19-22