“Aircraft Pu Hose Fitting Tee 8Mm-1/2 M” has been added to your cart.
View cart
Showing 17–32 of 98 resultsSorted by latest
-
R57,00
AirCraft PU Hose Fitting Tee 12mm x 3/8" Male BSP
At a Glance: Push-in tee for 12mm pneumatic hose with 3/8" M BSP threaded connection
Keep higher-flow pneumatic lines tidy while connecting into larger BSP ports with the AirCraft SPB12-03 PU Hose Fitting Tee 12mm x 3/8" Male BSP. This compact tee
uses push-in ports across the tee for 12mm PU pneumatic hose, and a 3/8" BSP male threaded port for connecting directly into manifolds, valves, regulators, FRL units,
gauges or other BSP female ports. It’s ideal for workshop air circuits, machinery and automation systems where you need a reliable 12mm branch connection without stacking
extra adaptors.
Standout feauture or series/quality/range Push-in speed with a larger 3/8" BSP threaded outlet
A clean way to bridge 12mm hose lines into higher-capacity equipment ports—fewer joints, fewer leak points, and simpler servicing.
-
R57,00
AirCraft PU Hose Fitting Tee 12mm x 1/4" Male BSP
At a Glance: Push-in tee for 12mm pneumatic hose with 1/4" M BSP threaded connection
Create a neat branch connection on higher-flow hose runs with the AirCraft SPB12-02 PU Hose Fitting Tee 12mm x 1/4" Male BSP. This compact tee uses push-in ports
across the tee for 12mm PU pneumatic hose, and a 1/4" BSP male threaded port for connecting directly into valves, manifolds, regulators, FRL units, gauges or other
BSP female ports. It’s ideal for workshop air circuits, machinery and automation systems where you want a tidy 12mm hose layout with a reliable threaded take-off—without
stacking bulky adaptors.
Standout feauture or series/quality/range Push-in convenience with a 1/4" BSP threaded take-off
Perfect when your main hose run is 12mm but the component port is 1/4" BSP—this tee bridges the two cleanly and reduces extra joints.
-
R56,00
AirCraft PU Hose Fitting Tee 12mm x 1/8" Male BSP
At a Glance: Push-in tee for 12mm pneumatic hose with 1/8" M BSP threaded connection
Branch a higher-flow pneumatic line neatly with the AirCraft SPB12-01 PU Hose Fitting Tee 12mm x 1/8" Male BSP. This compact tee uses push-in ports across the tee
for 12mm PU pneumatic hose, while the 1/8" BSP male threaded port provides a secure connection into valves, manifolds, gauges or other BSP female ports. It’s ideal
for workshop air circuits, machinery and automation systems where you need a clean 12mm hose layout plus a reliable threaded take-off point—without adding bulky adapters.
Standout feauture or series/quality/range Push-in control for larger hose runs with a threaded take-off
The 12mm hose size is often used where airflow demand is higher—this tee helps you create a tidy branch connection while still integrating into BSP equipment.
-
R56,00
AirCraft PU Hose Fitting Tee 10mm x 1/2" Male BSP
At a Glance: Push-in tee for 10mm pneumatic hose with 1/2" M BSP threaded connection
When you need a 10mm hose run but a larger BSP equipment port, the AirCraft SPB10-04 PU Hose Fitting Tee 10mm x 1/2" Male BSP keeps the installation neat and
efficient. This compact tee uses push-in ports across the tee for 10mm PU pneumatic hose, and a 1/2" BSP male threaded port for connecting directly into manifolds,
valves, regulators, FRL units, gauges or other BSP female ports. It’s ideal for workshop air circuits, machinery and automation systems where you want a reliable branch
connection without stacking adaptors.
Standout feauture or series/quality/range Push-in speed with a 1/2" BSP threaded outlet
A clean way to bridge 10mm hose lines into larger pneumatic equipment ports—fewer joints, fewer leak points, and easier maintenance.
-
R56,00
AirCraft PU Hose Fitting Tee 8mm x 1/2" Male BSP
At a Glance: Push-in tee for 8mm pneumatic hose with 1/2" M BSP threaded connection
When you need an 8mm hose run but a larger BSP equipment port, the AirCraft SPB08-04 PU Hose Fitting Tee 8mm x 1/2" Male BSP keeps the installation neat and
efficient. This compact tee uses push-in ports across the tee for 8mm PU pneumatic hose, and a 1/2" BSP male threaded port for connecting directly into manifolds,
valves, regulators, FRL units, gauges or other BSP female ports. It’s ideal for automation, machinery and workshop air systems where you want a reliable branch connection
without stacking adaptors.
Standout feauture or series/quality/range Push-in speed with a 1/2" BSP threaded outlet
A clean way to bridge 8mm hose lines into larger pneumatic equipment ports—fewer joints, fewer leak points, and easier maintenance.
-
R54,00
AirCraft PU Hose Fitting Tee 8mm x 8mm x 1/2" BSP (SG APD08-04)
At a Glance; 8 mm tube tee with 1/2" BSP male thread for robust air line branching
The AirCraft SG APD08-04 PU Hose Fitting Tee 8mm x 8mm x 1/2" BSP is a heavy-duty hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into a larger threaded port in one neat fitting. With two 8 mm push-in tube ports and a 1/2" BSP male thread, it’s ideal for larger manifolds, distribution blocks, valves and workshop air accessories—keeping your pneumatic layout compact, reliable and easy to service.
Hybrid tee: push-in tubing plus 1/2" BSP thread
This fitting helps avoid stacked adaptors by combining tube-to-tube branching with a threaded connection point in one compact body. Fewer joins means fewer potential leak points, while the push-in ports make tubing changes quick during maintenance.
-
R53,00
AirCraft PU Hose Fitting Tee 6mm x 6mm x 1/2" BSP (SG APD06-04)
At a Glance; 6 mm tube tee with 1/2" BSP male thread for robust air line branching
The AirCraft SG APD06-04 PU Hose Fitting Tee 6mm x 6mm x 1/2" BSP is a heavy-duty hybrid connector for pneumatic systems where you need a tube branch and a larger threaded connection point in one neat fitting. With two 6 mm push-in tube ports and a 1/2" BSP male thread, it’s ideal for larger manifolds, valves, distribution blocks and workshop air accessories—keeping your compressed-air layout tidy, reliable and easy to service.
Hybrid tee: push-in tubing plus 1/2" BSP thread
This fitting helps you avoid stacking adaptors by combining tube-to-tube branching with a threaded port in one compact body. Fewer joins means fewer potential leak points, while the push-in ports make tubing changes quick during maintenance.
-
R52,00
AirCraft PU Hose Fitting Tee 6mm x 1/2" Male BSP
At a Glance: Push-in tee for 6mm pneumatic hose with 1/2" M BSP threaded connection
When your setup needs 6mm hose lines but a larger BSP equipment port, the AirCraft SPB06-04 PU Hose Fitting Tee 6mm x 1/2" Male BSP keeps things neat and efficient.
This tee uses push-in ports across the tee for 6mm PU pneumatic hose, and a 1/2" BSP male threaded port for connecting directly into manifolds, valves, regulators,
FRL units, gauges or other BSP female ports. It’s ideal for compact pneumatic layouts in automation, machinery and workshop air systems where you want a reliable branch
connection without a stack of adapters.
Standout feauture or series/quality/range Push-in speed with a 1/2" BSP threaded take-off
A clean way to bridge smaller 6mm hose runs into larger pneumatic equipment ports—reducing extra fittings and keeping your installation tidy.
-
R50,00
AirCraft Red Insert T-Joint Side PU 10mm – 8mm (SG APDJ10-08)
At a Glance; Reducing side-branch tee: 10 mm main line with 8 mm branch outlet
The AirCraft SG APDJ10-08 Red Insert T-Joint Side PU 10mm – 8mm is a neat solution for pneumatic systems that need a smaller branch line off a larger main run. It allows a 10 mm tube line to pass straight through the fitting while providing a tidy 8 mm side take-off—ideal for feeding a secondary air circuit, valve, cylinder, pilot line, gauge, or accessory without cluttering your layout with extra reducers. Push-in connections keep installation fast and servicing simple.
Standout feature: reducing side tee for mixed tube sizes
Keep your 10 mm “backbone†line for airflow capacity, then step down to 8 mm where compact routing is needed. The colour-coded (red) body helps you identify reducing fittings quickly in panels and busy workshop setups.
-
R50,00
AirCraft Red Insert T-Joint PU 10mm – 8mm (SG APBJ10-08)
At a Glance; Reducing push-in tee: 10 mm main line to 8 mm branch connections
The AirCraft SG APBJ10-08 Red Insert T-Joint PU 10mm – 8mm is built for clean, high-flow pneumatic branching where you want a robust main feed and slightly smaller distribution lines. It allows a 10 mm tube run through the tee while providing 8 mm branch connections—perfect for workshop air reticulation, machine air circuits, manifolds, and installations where fast push-in fitment keeps downtime low and routing stays neat.
High-flow main line, tidy branch lines
This reducing tee combines branching and tube-size adaptation in one compact fitting, cutting down on extra joiners and potential leak points. The push-in collet design grips securely and releases easily when you need to service or reroute tubing.
-
R49,00
AirCraft PU Hose Fitting Tee 8mm x 1/4" F x 1/4" M (SG-APHF08-02)
At a Glance: 8mm Push-In Tube Port with 1/4" Female Thread x 1/4" Male Thread Tee
Create a neat, space-saving branch or adapter point in your air line system with the AirCraft SG-APHF08-02 PU hose fitting tee. This practical tee combines a quick push-in port for 8mm pneumatic tubing with a 1/4" female thread and a 1/4" male thread—ideal for routing, splitting or adapting compressed-air connections on regulators, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Versatile Pneumatic Plumbing
With both male and female 1/4" threaded ends plus an 8mm push-in tube port, this fitting helps you build clean pneumatic layouts where installation space is tight and reliable connections matter.
-
R47,00
AirCraft PU Hose Fitting Tee 4mm x 1/4" F x 1/4" M (SG-APHF04-02)
At a Glance: 4mm Push-In Tube Port with 1/4" Female Thread x 1/4" Male Thread Tee
Create a neat, space-saving branch or adapter point in your air line system with the AirCraft SG-APHF04-02 PU hose fitting tee. This versatile tee combines a quick push-in port for 4mm pneumatic tubing with a 1/4" female thread and a 1/4" male thread—ideal for routing, splitting or adapting compressed-air connections on regulators, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Versatile Pneumatic Plumbing
With both male and female 1/4" threaded ends plus a 4mm push-in tube port, this fitting helps you build clean pneumatic layouts where installation space is tight and reliability matters.
-
R47,00
AirCraft Insert T-Joint Side PU 8mm (SG APDJ08)
At a Glance; Side-branch push-in tee for 8 mm pneumatic tubing
The AirCraft SG APDJ08 Insert T-Joint Side PU 8mm is designed for clean, space-saving branching in pneumatic systems. This side tee fitting lets you run an 8 mm tube line through while taking a tidy side outlet for an extra tool, valve, gauge, or accessory. It’s ideal for workshop air layouts, control panels, machinery and air distribution runs where quick push-in installation keeps everything organised and easy to maintain.
Compact branching that keeps the main run straight
The side-branch tee layout helps prevent messy tubing routes by keeping your main line flowing straight through the fitting, while the branch port provides a convenient take-off point. Push-in collets grip securely and release quickly for servicing or rerouting.
-
R47,00
AirCraft Insert T-Joint PU 8mm (SG APBJ08)
At a Glance; 8 mm push-in tee connector for fast air line branching
The AirCraft SG APBJ08 Insert T-Joint PU 8mm is a tidy, time-saving way to split one pneumatic line into two. Designed for 8 mm tubing (commonly PU/nylon air line), this push-in tee fitting makes clean installs easy—push the tube in, route your branch, and you’re back in action with a secure connection that’s ideal for airbrush stations, small regulators, manifolds, and compact workshop air setups.
Quick-connect convenience in a compact tee
Built for everyday workshop use, this insert-style T-joint helps you create neat branches without complicated clamps or fiddly hose tails. The push-in collet design allows quick assembly and simple tube release when you need to adjust or service your line.
-
R46,00
AirCraft PU Hose Fitting Tee 6mm x 1/4" F x 1/4" M (SG-APHF06-02)
At a Glance: 6mm Push-In Tube Port with 1/4" Female Thread x 1/4" Male Thread Tee
Create a neat, space-saving branch or adapter point in your air line system with the AirCraft SG-APHF06-02 PU hose fitting tee. This versatile tee combines a quick push-in port for 6mm pneumatic tubing with a 1/4" female thread and a 1/4" male thread—ideal for routing, splitting or adapting compressed-air connections on regulators, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Versatile Pneumatic Plumbing
With both male and female 1/4" threaded ends plus a 6mm push-in tube port, this fitting helps you build clean pneumatic layouts where installation space is tight and reliability matters.
-
R46,00
AirCraft PU Hose Fitting Tee 10mm x 10mm x 3/8" BSP (SG APD10-03)
At a Glance; 10 mm tube tee with 3/8" BSP male thread for strong, tidy air line branching
The AirCraft SG APD10-03 PU Hose Fitting Tee 10mm x 10mm x 3/8" BSP is a practical hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into a larger threaded port. With two 10 mm push-in tube ports and a 3/8" BSP male thread, it’s ideal for manifolds, valves, regulators and workshop air accessories—keeping your pneumatic layout compact, reliable and easy to maintain.
Hybrid tee: push-in tubing plus 3/8" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for stacked adaptors. Fewer joins means a cleaner install and fewer potential leak points across your air line.
