Showing 129–144 of 259 resultsSorted by latest
Size: 230 mm diameter [Bore: 22.23 mm]
This 230 mm Tork Craft Turbo-Wave diamond blade combines the speed of a turbo rim with the smoother cut profile of a wave core. Suited to masonry, concrete, stone, tile, and block-work in professional and trade environments.
Size: 185 mm diameter × 14 teeth, 20/16 mm bore, designed for cutting wood with embedded nails
The Tork Craft Blade TCT Nail Cutting 185 × 14T (20/16mm) is engineered to tackle demanding job-site materials — whether you’re dealing with timber containing old nails, mixed demolition waste or reused boards. It is designed to give smooth, reliable cuts while minimising chip-outs and damage from metal-reinforced timber.
With 14 hardened carbide teeth set in a precision TCT (tungsten carbide tipped) design, this blade offers strength and longevity when encountering embedded nails and fasteners. Its 20/16 mm bore allows fit-up to most standard circular saws and table saws with compatible arbors, giving you a practical, robust solution in mixed material cutting scenarios.
Biscuit joiner blade
This Tork Craft biscuit joiner blade is 100mm in diameter and has 8mm tungsten
carbide teeth to produce an accurate biscuit slot. With a 22mm bore, this will fit
almost all known biscuit jointers. A high quality blade for trade or professional
use.
Always make use of the necessary safety equipment when using machinery
or powertools!
Size: 230 mm diameter [Bore: 22.23 mm]
Designed for versatile site use, this 230 mm Tork Craft blade features a turbo-segmented rim that combines the speed of a turbo rim with the aggressive cutting action of a segmented blade. It excels in masonry, concrete block, stone and other building materials where fast removal and durability matter.
TYPE:
Laser welded and turbo segmented.
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. The diamonds are industrial
diamonds of different sizes and qualities depending on the material to be cut as
well a the blade type.
The individual diamond crystals exposed on the leading edge and the sides of
the segment or rim carry out the cutting. The operator pushes the rotating blade
into the material and the surface diamonds thus exposed mill a groove in the
material. When the blade mills the material, the latter exerts wear on the
blade. During cutting the exposed diamonds may crack
or break. The material simultaneously starts to abrade the metal matrix, which
releases more diamonds.
The more abrasive the material, the more rapid
the tendency to wear down the matrix. Blades for cutting hard, denseless
abrasive materials (such as tile, bricks, stone or cured concrete), require
a softer metal matrix.
This will wear down faster, replacing the worn diamonds
fairly quickly so that the blade continues to cut.
Blades for cutting soft,
abrasive materials (such as green concrete and asphalt), must have a hard,
abrasion-resistant metal matrix in order to retain the diamonds for a longer
time.
Water will prevent the blade from overheating:
It will greatly reduce the amount of harmful dust created by cutting. Remove the
slurry from the cut, and extend the life of the blade.
Size: 235 mm diameter × 40 teeth [Bore: 30/16 mm]
A solid all-round choice for both ripping and cross-cutting, this 235 mm diameter Tork Craft blade features 40 tungsten-carbide tipped teeth and a dual-bore fit of 30 mm and 16 mm. With the balanced geometry and durable construction, it handles softwood, hardwood, plywood and laminates with dependable performance.
Size: 235 mm diameter × 40 teeth [Bore: 16 mm]
A versatile all-rounder from Tork Craft: this 235 mm diameter, 40-tooth TCT blade offers a balanced solution for both ripping and cross-cutting. With a direct 16 mm bore fit, it’s ready to mount on many standard saws. The tungsten-carbide tipped teeth and stable plate provide consistent, reliable performance through softwood, hardwood, plywood and MDF.
Highlights: 235 mm diameter Contractor Series blade with 24 precision-tipped carbide teeth and a fixed 16 mm bore for simplified fit-up
The Tork Craft Contractor TCT Circular Saw Blade 235 mm × 24T × 16 mm is an excellent choice for contractors and tradespeople who need a dependable blade day after day. With 24 tungsten carbide-tipped teeth, it delivers solid efficiency across softwoods, selected hardwoods and wood-based panel materials.
This blade’s fixed 16 mm bore ensures direct mounting on compatible saws, eliminating the need for reducing bushes and simplifying setup. Built under the Contractor Series banner—this isn’t a budget compromise but a reliable tool made for professional use.
The Contractor Series from Tork Craft is a trade-grade range designed for professionals who need durability, consistency and compatibility. These blades are engineered for tough conditions and frequent use—delivering the performance demanded in real-world job-site and workshop scenarios.
Size: 200 mm diameter [Bore: 25.4 mm]
This 200 mm Tork Craft Turbo rim diamond blade is designed for trades and general use. The turbo edge helps clear debris efficiently while maintaining cutting speed, making it ideal for tile, masonry, stone and concrete applications. The 25.4 mm bore ensures compatibility with standard handheld and bench saws.
TYPE:
Continuous rim.
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. The diamonds are industrial
diamonds of different sizes and qualities depending on the material to be cut as
well a the blade type.
The individual diamond crystals exposed on the leading edge and the sides of
the segment or rim carry out the cutting. The operator pushes the rotating blade
into the material and the surface diamonds thus exposed mill a groove in the
material. When the blade mills the material, the latter exerts wear on the
blade. During cutting the exposed diamonds may crack
or break. The material simultaneously starts to abrade the metal matrix, which
releases more diamonds.
The more abrasive the material, the more rapid
the tendency to wear down the matrix. Blades for cutting hard, denseless
abrasive materials (such as tile, bricks, stone or cured concrete), require
a softer metal matrix.
This will wear down faster, replacing the worn diamonds
fairly quickly so that the blade continues to cut.
Blades for cutting soft,
abrasive materials (such as green concrete and asphalt), must have a hard,
abrasion-resistant metal matrix in order to retain the diamonds for a longer
time.
Water will prevent the blade from overheating:
It will greatly reduce the amount of harmful dust created by cutting. Remove the
slurry from the cut, and extend the life of the blade.
Highlights: 200 mm diameter Contractor Series blade with 60 tungsten carbide-tipped teeth and multi-bore fitment (30/20/16mm) for versatile saw compatibility and high finish potential
The Tork Craft Contractor TCT Circular Saw Blade 200 mm × 60 T × 30/20/16mm is part of the Contractor Series — designed for tradespeople who require a robust, dependable tool that performs day after day. With 60 carbide-tipped teeth, this blade offers a refined balance of smooth finish and strong feed rate for softwoods, hardwoods and wood-based panels.
Featuring a 30mm bore with reducing bushes for 20mm and 16mm, this blade fits a wide range of circular saws across workshop and site environments. Its 200mm diameter gives extra cutting depth while the Contractor Series construction ensures durability and consistent performance under demanding use.
The Contractor Series from Tork Craft is a professional-grade range crafted for contractors, carpenters and site professionals who need reliable, repeatable cutting performance—not compromise. These blades combine carbide-tipped teeth, high-standard construction and practical compatibility features to deliver trusted results.
Highlights: 210 mm Contractor Series TCT blade with 40 teeth and a fixed 16 mm bore for everyday trade use
The Tork Craft Contractor TCT Circular Saw Blade 210 mm × 40 T × 16 mm is part of the Contractor Series, a trade-focused range designed for reliable performance on site and in the workshop. With 40 tungsten carbide-tipped teeth, it offers a solid balance between cutting speed and clean finish on softwoods, selected hardwoods and wood-based panels.
The fixed 16 mm bore is ideal for saws that use this arbor size, giving a secure, direct fit with no adaptors required. Combined with the 210 mm diameter, this blade adds cutting depth and capacity while still being easy to control on typical job-site circular saws.
The Tork Craft Contractor Series TCT circular saw blade is a professional-grade range built for tradespeople who rely on their tools every day. These blades are not economy versions – they’re designed for durability, consistent performance and dependable results under real job-site conditions.
Size: 250 mm diameter × 40 teeth [Bore: 30/20/16 mm]
A reliable all-rounder for the workshop and jobsite. This 250 mm Tork Craft blade uses 40 tungsten-carbide tipped teeth and a stable plate to balance ripping speed with a smooth cross-cut finish. It tracks straight through framing timber, sheet goods and laminates, delivering tidy, predictable results.
Size: 250 mm diameter × 40 teeth [Bore: 16 mm]
A dependable all-rounder. This 250 mm, 40-tooth Tork Craft TCT blade balances cutting speed with a clean finish, so you can rip framing stock in the morning and cross-cut sheet goods in the afternoon without swapping blades. Tungsten-carbide tips keep their edge and a stable plate tracks straight through softwoods, hardwoods, plywood and MDF.
Size: 210 mm diameter × 60 teeth [Bore: 30/20/16 mm]
For when a clean, high-quality finish matters, this 210 mm diameter Tork Craft blade with 60 tungsten-carbide tipped teeth delivers superb cross-cut performance. With bore adaptability (30/20/16 mm), it fits multiple saws and is perfect for plywood, hardwoods, MDF and laminates. Built to give smooth, chip-reduced edges and long-lasting sharpness.
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
The continuous rim cuts the slowest of any of the different styles of diamond
cutting blades, but as a trade-off it produces the best cut. Typically, the continuous
rim is used for cutting marble, granite, porcelain tile, and ceramic tile.
Subtotal: R257,00