“Tork Craft Diamond Core Bit 75X170Mm Universal Purpose M16” has been added to your cart.
View cart
Showing 1–16 of 67 resultsSorted by latest
-
-
R1 596,05
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø117mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 305,59
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø65mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 305,59
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in brickwork for an installation.
Core diameter: Ø65mm
Depth: 170mm
Adaptor thread: M22
Main use: Brickwork
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 279,13
Diameter: 38mm
Full Length: 570mm
Drilling Depth: 450mm
A SDS MAX Cross Head Double Flute Drill Bit is a specialized tool designed for heavy-duty drilling applications.
These bits are ideal for professionals who need a powerful and versatile tool for demanding drilling tasks.
Application:
-
R1 196,67
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø75mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 160,33
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø52mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 160,33
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in brickwork for an installation.
Core diameter: Ø52mm
Depth: 170mm
Adaptor thread: M22
Main use: Brickwork
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 160,33
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø38mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R1 034,74
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in brickwork for an installation.
Core diameter: Ø75mm
Depth: 170mm
Adaptor thread: M22
Main use: Brickwork
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R986,10
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in concrete/brickwork for an installation.
Core diameter: Ø78mm
Depth: 170mm
Adaptor thread: M22
Main use: Universal
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R802,28
Core diameter: Ø80mm
Depth: 150mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R770,57
Core diameter: Ø70mm
Depth: 150mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R747,54
Dry Cut Diamond Core Drill
For plumbers, electricians or general contractors needing to
drill a hole quickly and cleanly in brickwork for an installation.
Core diameter: Ø38mm
Depth: 170mm
Adaptor thread: M22
Main use: Brickwork
Application:
The dry cut diamond core drill is designed to be used without water to drill
into:
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
-
R708,59
Tork Craft SDS MAX 4-Cutter Drill Bit — 520 × 400 × 28 mm (Model MX52028)
The Tork Craft MX52028 SDS MAX drill bit is engineered for deep, powerful drilling in tough materials such as reinforced concrete, stone, and masonry. Its 4-cutter carbide tip and optimized flute design deliver precision, strength, and efficient dust removal, making it ideal for heavy-duty construction and installation work.
-
R694,28
Core diameter: Ø125mm
Depth: 72mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
Renault Timing gear - camshaft