“Tork Craft Scotch Eye Auger Bit 25Mm X 400Mm” has been added to your cart.
View cart
Showing 1–16 of 144 resultsSorted by latest
-
R1 119,62
Included in the set:
Bi-metal hole saws:
(x1) Ø19mm
(x1) Ø22mm
(x1) Ø29mm
(x1) Ø35mm
(x1) Ø38mm
(x1) Ø44mm
(x1) Ø54mm
(x1) Ø57mm
(x1) Ø64mm
Adaptors:
(x1) HSS adaptor Ø16-35mm
(x1) 7/16′ Hex HSS adaptor ø38-64mm
(x1) Hex key for replacing pilot drill bit
INFO:
The set includes a storage case for transport.
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R965,55
Included in the set:
Bi-metal hole saws:
(x1) Ø16mm
(x1) Ø20mm
(x1) Ø25mm
(x1) Ø32mm
(x1) Ø40mm
(x1) Ø51mm
Adaptors:
(x1) 3/8′ Hex HSS adaptor Ø16-25mm
(x1) 7/16′ Hex HSS adaptor ø32-51mm
(x1) Hex key for replacing pilot drill bit
(x1) Adaptor 1/2-20UNF – 5/8-18UNF
INFO:
The set includes an aluminium storage case for transport.
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R705,60
Included in the set:
Bi-metal hole saws:
(x1) Ø19mm
(x1) Ø22mm
(x1) Ø29mm
(x1) Ø38mm
(x1) Ø44mm
(x1) Ø57mm
Adaptors:
(x1) 3/8′ Hex HSS adaptor Ø19-29mm
(x1) 7/16′ Hex HSS adaptor ø38-57mm
(x1) Hex key for replacing pilot drill bit
(x1) Adaptor 1/2-20UNF – 5/8-18UNF
INFO:
The set includes a storage case for transport.
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R575,46
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø22mm
MATERIAL: Hardened steel with a shear angle design for smooth
and easy cutting
Application:
There is a variety of different plug cutters in the range, depending on the diameter
hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole
is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth.
A band saw can then be used to remove the plugs from the offcut.
-
R553,06
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø20mm
MATERIAL: Hardened steel with a shear angle design for smooth
and easy cutting
Application:
There is a variety of different plug cutters in the range, depending on the diameter
hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole
is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth.
A band saw can then be used to remove the plugs from the offcut.
-
R547,82
Size: 25.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
-
R520,43
Tork Craft Scotch Eye Auger Bit 25mm x 400mm – Bulk
Highlights: 25mm diameter, 400mm length, Scotch eye loop handle for controlled manual drilling.
When precision meets big-bore drilling needs, the Tork Craft Scotch Eye Auger Bit steps in. With a 25 mm diameter and extended 400 mm shaft, it’s ideal for drilling large holes through timber posts, beams, structural frames and outdoor utility installations where depth and size matter. The Scotch eye loop handle allows insertion of a rod or screwdriver for added torque and control, and the self-feeding threaded tip guides the bit through the timber with minimal wandering and less effort.
Large-bore manual auger with Scotch eye leverage and extended reach for structural drilling
Engineered for demanding timber drilling where large hole size and depth are essential.
-
R504,95
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø16mm
MATERIAL: Hardened steel with a shear angle design for smooth
and easy cutting
Application:
There is a variety of different plug cutters in the range, depending on the diameter
hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole
is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth.
A band saw can then be used to remove the plugs from the offcut.
-
R498,80
Size: 22.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
-
R473,90
Tork Craft Scotch Eye Auger Bit 20mm x 400mm – Bulk
Highlights: 20mm diameter bore, 400mm long shaft and Scotch eye loop handle for reliable manual torque.
When you need a large bore and deep reach for timber or structural work, the Tork Craft Scotch Eye Auger Bit brings the muscle. With a 20 mm diameter and a generous 400 mm length, it’s tailored for drilling through thick posts, beams, utility installations and heavy-duty carpentry where access and accuracy matter. The Scotch eye loop handle gives you a point to apply a lever or rod for controlled manual torque, and the self-feeding threaded tip engages the material easily for smooth, accurate feed and minimal wandering.
Large-bore manual auger with extended reach and Scotch eye leverage
Crafted for structural timber drilling with precision and strong manual control.
-
R440,05
Size: 20.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
-
R428,60
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø8mm
MATERIAL: Hardened steel with a shear angle design for smooth
and easy cutting
Application:
There is a variety of different plug cutters in the range, depending on the diameter
hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole
is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth.
A band saw can then be used to remove the plugs from the offcut.
-
R418,05
SCOTCH EYE AUGER BIT 20MM X 400MM BULK
-
R402,05
Application:
An expansive auger bit has an adjustable cutter, for boring holes of different
diameters.
A scale on the cutter blade indicates the diameter of the hole to be bored.
It is a must have for a woodworker who is required to drill an odd size diameter
hole.
NOTE:
Drill into an off-cut first to determine if the desired
diameter is correct.
Always keep the drill bit perpendicular to the workpiece.
-
R387,90
Items: 6, 8, 10, 12, 16mm
Quantity: 5
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be aligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R352,65
Diameter: 25 mm
Length: 460 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
