“Tork Craft Auger Bit 3 X 300Mm Pouched” has been added to your cart.
View cart
Showing 33–48 of 144 resultsSorted by latest
-
R213,95
Diameter: 18 mm
Length: 460 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R198,00
45mm Forstner bit
Drill pocket holes, flat bottom holes, etc. using any 10mm or larger portable
drill or stationary drill press. Forstner pattern bits are well known for their
ability to drill clean and chip-free holes in wood. Made of quality steel. Large
gullets milled in the tool body provide exceptional chip clearance.
Forstner Drill Bits bore precise, flat-bottomed holes in wood, in any
orientation with respect to the wood grain. They can cut on the edge of a block
of wood, and can cut overlapping holes. Because of the flat bottom to the hole,
they are useful for drilling through veneer already glued to add an inlay.
- Forstner bits bore smooth, flat bottomed holes with clean edges
- Suitable for cutting MDF, Hardwoods, Softwoods and Melamine.
- Vertical face of cutting teeth can be re-sharpened.
Forstner Drill Bits bore precise, flat-bottomed holes in wood, in any orientation with respect to the wood grain
-
R78,00
Daimeter: Ø14.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R78,00
Diameter: 3 mm
Length: 400 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R72,00
Daimeter: Ø10.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R71,00
Diameter: Ø8.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R71,00
Daimeter: Ø8.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R69,00
Diameter: Ø6.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R69,00
Diameter: 5 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R67,00
Diameter: 4 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R67,00
Diameter: Ø35.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R66,00
Diameter: Ø40.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R66,00
Diameter: Ø38.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R66,00
Diameter: 3 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R66,00
Length:
150mm
Shank: 6.35mm hex for quick change
Application:
Use the extension to add extra length to a spade bit. The extension can be
used with the standard and the Pro series spade bits.
NOTE:
Secure both grub screws with the supplied allen key before use.
-
R62,00
Daimeter: Ø6.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
