“Tork Craft Auger Bit 20 X 170Mm Pouched” has been added to your cart.
View cart
Showing 81–96 of 141 resultsSorted by latest
-
R204,00
Diameter: 24 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R197,00
Diameter: Ø20.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R191,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R188,00
Diameter: Ø19.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R183,00
Diameter: 19 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R174,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R172,00
Diameter: Ø10.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R153,00
Tork Craft Drill Bit — 20.0 mm × 180 mm (Wood/Universal)
The Tork Craft 20.0 mm twist drill bit is engineered for deep, precise boring in wood, plywood, MDF and composite materials. With a full 180 mm overall length, it’s ideal for thick stock and structural joinery tasks where stable, clean holes are critical.
-
R165,00
Diameter: 12 mm
Length: 460 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R160,00
Diameter: Ø25.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R160,00
Diameter: Ø16.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R158,00
Diameter: 20 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R158,00
Diameter: 19 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R156,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R146,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R145,00
Daimeter: Ø25.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
Land Rover throttle body unit 2 PIPES 
Tork Craft Combination Spanner 8Mm 
Peugeot EGR valve 
Alfa / Fiat thrust washer set (60mm MAIN) 
Aircraft Pliable Washer For H827 
Tork Craft Spade Bit 19Mm 150Mm 
Tork Craft Plier Mini Bent Nose 120Mm Micro 
Jeep/ Mercedes Sensor - Crankshaft (3 Pin Oval Plug) 
Alfa Coolant expansion bottle cap 
Jeep filter kit - auto transmission 
Alfa/Fiat Sensor - Lambda (oxygen)-upper (4 wire) 
Renault brake master cylinder (23.81MM) 
Tork Craft Pozi.2 X 25Mm Insert Bit Bulk 
Festool Backing Pad St-Stf D150-Mj2-M8-W-Ht