“Tork Craft Die Carb.Steel 10X1.50Mm 1/Cse” has been added to your cart.
View cart
Showing 1777–1792 of 4680 resultsSorted by latest
-
R72,00
AirCraft Metal PU Fitting Elbow 6mm x 1/2′ Male (SG MPL06-04)
At a Glance; Compact 90° elbow with 6mm push-in tube connection and 1/2" male thread.
The AirCraft SG MPL06-04 Metal PU Fitting Elbow is built for pneumatic systems where a 6mm line needs a clean corner turn into a larger 1/2" threaded port. It connects 6mm pneumatic/PU tubing to a 1/2" male threaded outlet, giving you a neat 90° route where space is tight and routing needs to stay organised. With durable metal construction and a secure push-in tube connection, it’s a reliable choice for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where dependable sealing matters.
Strong 90° AirCraft metal push-in elbow fitting for 6mm tube
A workshop-ready elbow connector that keeps routing tidy while providing a robust threaded connection to larger pneumatic ports.
-
R72,00
Shank:
U-shank
Distance between teeth: 2.5mm
Total length: 100mm
Teeth Per Inch: 10TPI
Packaging: Pack of 5
Application:
The jigsaw blades are used to cut:
Compatibility:
- RYOBI
- HITACHI
- BLACK&DECKER
- DEWALT
- MAKITA
- SKIL
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
-
R72,00
Daimeter: Ø10.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R72,00
Drill bit diameter: Ø6.35mm
Application:
The drill bit is a replacement pilot drill bit for Diamond coated hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R72,00
Size: 17 mm
Shank: 1/2 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R72,00
AirCraft Manifold Brass 1/2" x 1/2" F/F (SB1245P) – Packaged
At a Glance: 1/2" female-to-female brass manifold fitting for strong, compact pneumatic connections
When you’re running larger air lines and you want a connection that’s solid, tidy and serviceable, the right fitting makes all the difference.
The AirCraft SB1245 brass manifold fitting provides a 1/2" female-to-female (F/F) connection—ideal for joining two matching male-thread fittings,
extending a port, or repositioning a connection point on manifolds, regulators, filters and general compressed-air plumbing. Made from durable,
corrosion-resistant brass, it’s built for workshop and industrial environments where reliability is non-negotiable.
AirCraft Brass Fittings – Built For High-Use Air Systems
AirCraft brass fittings are designed for dependable compressed-air connections with long service life.
This 1/2" F/F manifold fitting helps keep your airline layout clean and strong, without awkward workarounds.
-
R72,00
Tork Craft Mini Rotary Tool Attachment for TCMT001 – Depth Adjustment to 19 mm
Highlights: Depth-adjustable attachment for TCMT001 mini rotary tool, 0-19 mm plunge control
The Tork Craft Mini Rotary Tool Attachment (TCMT001DA) transforms your TCMT001 mini rotary tool into a plunge-style routing or engraving station with precise depth control up to 19 mm. Whether you’re trimming, shaping, engraving or detail-routing, this accessory adds professional functionality to your compact tool.
With simple mounting and a depth-stop adjustment, it helps maintain consistent cutting depth across work-pieces, making it perfect for hobbyists, model-makers, electronics repair, craft work and light woodworking. The sturdy construction ensures accurate results and enhances the versatility of your mini rotary system.
-
R72,00
Sanding belt for Belt Sander – 600 Grit
Compatible with all belt sanders that require sanding belts 100mm wide and 610mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 100mm x 610mm
Grits Available: P40, P60, P80, P100 and P120
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R72,00
Sanding belt for Belt Sander – 400 Grit
Compatible with all belt sanders that require sanding belts 100mm wide and 610mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 100mm x 610mm
Grits Available: P40, P60, P80, P100 and P120
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R71,00
Diameter: Ø8.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R71,00
Tork Craft Putty Knife 75mm S/Steel Blade with Soft Grip & Steel Cap
Highlights: 75mm stainless steel blade with soft grip handle and steel hammer cap
The Tork Craft TCPK0075 Putty Knife brings broad-coverage efficiency to surface preparation.
Its 75mm wide stainless steel blade handles spreading large amounts of filler or smoothing over larger panel areas with ease.
The soft grip handle gives comfort during extended use and the steel hammer cap allows controlled tapping when needed to remove stubborn coatings or adhesive layers.
Standout feature – extra-wide 75mm stainless steel blade for larger surfaces
This 75mm version from Tork Craft is built for bulk surface work: the wide stainless blade allows you to cover more area in fewer strokes, while still maintaining durable construction and ergonomic features.
Ideal for application on large walls, doors, panels or for scraping old coatings before renewal.
-
R71,00
Daimeter: Ø8.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R71,00
Size: 19 mm
Application:
The Tork Craft Combination spanners have two heads. One with an open-ended profile and the other with a ring profile. Combination spanners are good value for money as you get two tools for the price of one, note that both the heads are the same size so you only get one size per spanner.
The looped end of the combination spanner comes in contact wth all sides of a fastener thus it provides a better grip and is less likely to slip while turning.
Made from hardened chrome vanadium steel
- Hexagonal shape head
- The looped end of the cominbation spanner comes in contact with all
sides of a fastener, thus it provides much better grip and is less likely to
slip
- The closed profile is more preffered for turning fasteners when
tightening or loosening a nut or bolt
- Made from hardened chrome vanadium steel
- Comprise of a ring style spanner on one end and an open jaw spanner on
the other
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R71,00
Shank:
T-shank
Distance between teeth: 2.5mm
Total length: 100mm
Teeth Per Inch: 10TPI
Packaging: Pack of 5
Application:
The jigsaw blades are used to cut:
Compatibility:
- AEG
- ATLAS-COPCO
- BOSCH
- DEWALT
- ELU
- FESTOOL
- HITACHI
- MAKITA
- METABO
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
CAUTION:
The cutting direction of these jigsaw blades are reversed. Clamp the workpiece
down before using the jigsaw. The blades could lift the jigsaw from the
workpiece when cutting. A plunge cut cannot be made with reversed jigsaw
blades.
-
R71,00
Tork Craft Carbon Steel Die — 12 × 1.75 mm (Model NR4120C)
The Tork Craft NR4120C is a carbon-steel die designed to cut external threads on 12 mm rods or bolts with a 1.75 mm pitch. Supplied in card-packed format for easy pick-up and display, this die is ideal for metal fabrication, workshop use and maintenance environments requiring reliable thread cutting.
-
R71,00
Size: M10
Thread: 1.50mm
<!-- 
-->
This product is a reliable die for creating external threads, crafted from high-quality carbon steel for dependable
performance and durability. Its hexagonal design allows for versatile use with a wrench or socket, providing a
secure grip and making it suitable for a variety of threading applications. Engineered to cut M10 x 1.50mm metric
threads, this tool is ideal for general-purpose use in a workshop or for home projects. It is conveniently sold with
one die per case, ensuring it is ready for use when you need it and offering a practical solution for both
professionals and DIY enthusiasts.
Application:
- For cutting external threads
- Thread repair and cleaning
- Construction
- Manufacturing
- DIY
