“Tork Craft Sanding Disc 150Mm 240 Grit 10/Pk Hook And Loop” has been added to your cart.
View cart
Showing 1857–1872 of 4680 resultsSorted by latest
-
R68,00
Sanding belt for Belt Sander – 100 Grit
Compatible with all belt sanders that require sanding belts 100mm wide and 530mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 100mm x 530mm
Grits Available: P40, P60, P80, P100 and P120
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. Short belts cause extreme load on the roller shafts and bearings/bushings,
shortening the machine’s lifespan.
-
R68,00
Sanding belt for Belt Sander – 120 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R68,00
Sanding belt for Belt Sander – 80 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R68,00
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R68,00
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R68,00
AirCraft Fluid Nozzle Joint SG-H827-18 For SG-H827 Spray Gun
At a Glance: Threaded fluid nozzle joint/connector that helps secure and seat the nozzle assembly for a proper seal and stable spray output.
The AirCraft SG-H827-18 Fluid Nozzle Joint is a precision connector component used in the AirCraft SG-H827 spray gun nozzle area.
This joint plays an important role in keeping the fluid nozzle assembly correctly seated and aligned. When the nozzle joint is worn, damaged, cross-threaded, or contaminated with dried coating, it can lead to poor sealing, inconsistent flow, and spray patterns that refuse to stay consistent.
Replacing the fluid nozzle joint helps restore a solid, leak-free connection around the nozzle area—supporting cleaner atomisation and more predictable finishing results.
Secure Nozzle Seating and Better Sealing: the SG-H827-18 Nozzle Joint
A stable nozzle connection helps the needle and nozzle seal correctly, reducing dripping and improving consistency. Match the Cat No. SG-H827-18 to ensure correct fitment for your SG-H827 spray gun.
-
R68,00
AirCraft PU Hose Fitting Elbow 12mm-1/4" F BSP
At a Glance: 12mm push-in to 1/4" female BSP elbow—clean 90° routing with a secure threaded connection.
Build a cleaner, more reliable pneumatic layout with the AirCraft PU Hose Fitting Elbow 12mm-1/4" F BSP. This compact 90-degree push-in connector is made for 12mm PU tubing, allowing fast installation and controlled routing in tight spaces. The 1/4" female BSP thread connects to compatible pneumatic ports and adapters on manifolds, regulators and valves, while the elbow design helps prevent kinks, reduces tubing strain, and keeps airflow running smoothly under normal compressed-air use.
Standout feature: Push-in speed with a space-saving 90° elbow for tidy hose routing
Quick tube fitment, neat corner routing, and easier servicing—ideal for organised pneumatic assemblies.
-
R68,00
AirCraft Cross Type Connector Mmmm 1/4" ft – SG11140
At a Glance: 4-way cross connector with 1/4" male BSP threads (all sides)
Need a compact way to branch an air line in multiple directions without building a bulky manifold? The AirCraft SG11140 Cross Type Connector is a neat 4-way junction fitting designed for efficient pneumatic routing. With 1/4" male BSP threads on all sides (MMMM), it’s ideal for connecting multiple female-threaded components, adaptors, quick couplers, regulators, or air line accessories in a tight footprint. Perfect for workshop air points, custom tool stations, and maintenance setups where you want clean, logical plumbing that’s easy to service.
Standout feature: Compact 4-way 1/4" male BSP cross fitting for tidy air-line junctions
Turns one connection point into four directions—ideal for splitting lines or creating a small manifold-style junction without the bulk.
-
R68,00
AirCraft 4-Way Hose Connector 8mm 1pce Blister – SG10272-1P
At a Glance: 8 mm barbed 4-way cross connector in a single-piece blister pack
When you need a clean junction point for multiple air lines, the AirCraft SG10272-1P 4-Way Hose Connector is the simple, workshop-ready answer. This compact cross fitting connects up to four 8 mm hose runs, making it ideal for splitting airflow, organising pneumatic routing, or building tidy bench and tool-station layouts. The barbed hose-tail ends are designed to grip inside the hose for a secure, dependable connection. Supplied as 1 piece in a convenient blister pack—perfect for quick replacements and grab-and-go maintenance.
Standout feature: 4-way cross fitting with fast-fit 8 mm barbs, supplied in a neat blister pack
A small but mighty connector that turns hose spaghetti into a tidy junction—ideal for multi-line air distribution without bulky hardware.
-
R68,00
AirCraft Brass Conical Straight 5/16" Tube x 3/8" M (SB6805C)
At a Glance: Conical tube-to-thread straight fitting: 5/16" tube to 3/8" male connection
When a 5/16" tube run needs to connect into a bigger 3/8" threaded port, you want a fitting that does the job cleanly—without a bulky stack of
adaptors. The AirCraft SB6805C brass conical straight fitting is a compact tube-to-thread connector that links 5/16" pneumatic tubing to a 3/8"
male thread in a straight-through layout. It’s ideal for neat pneumatic installations on manifolds, air prep units, control circuits and general
compressed-air plumbing where reliable sealing and serviceability matter.
AirCraft Brass Conical Tube Fittings – Neat Tube-To-Port Adaptation
AirCraft tube fittings are built for practical, workshop-ready pneumatic layouts.
This straight connector gives you a tidy transition from 5/16" tubing to a 3/8" male-thread port with minimal fuss and a clean finish.
-
R67,00
Application:
This is a heavy duty cleaning compound to be used with a polishing buff to clean hard
metals:
- Steel
- Iron
- Stainless steel
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessable, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occuring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R67,00
AirCraft Brad Nails — 16 Gauge × 32 mm (Box of 2 500)
Step up holding strength without spoiling the finish. These 16-gauge, 32 mm brads sink cleanly with a small head for minimal filling, while the heavier shank grips firmly in thicker trims, casings and cabinet assemblies. Supplied in a 2 500-count box and compatible with the AirCraft AT0002 and most straight-strip 16 g brad nailers.
-
R67,00
For use with random orbital sanders.
SIZE:
ø150mm
GRIT: P240
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R67,00
For use with random orbital sanders.
SIZE:
ø150mm
GRIT: P180
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R67,00
For use with random orbital sanders.
SIZE:
ø150mm
GRIT: P120
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R67,00
Diameter: 4 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Tork Craft Spade Bit Pro Series 35Mm X 150Mm