“Tork Craft Sanding Belt 64 X 406Mm 240Grit 2/Pack” has been added to your cart.
View cart
Showing 1873–1888 of 4680 resultsSorted by latest
-
R67,00
Diameter: Ø35.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R67,00
Tork Craft Mini Nylon Brushes 5pce 3.2 mm Shaft Assorted Shapes
At a Glance: 5 piece mini nylon shaft brush set for gentle cleaning and finishing on delicate or painted surfaces
The Tork Craft TCW006-6 Mini Nylon Brush Set delivers a versatile set of five small nylon-bristle brushes mounted on 3.2 mm shafts — perfect for delicate cleaning, light paint or rust removal, deburring, and surface preparation on metals, plastics, wood or painted surfaces. These brushes are ideal where traditional steel wire brushes would be too aggressive, offering a softer, non-scratch finish that helps preserve surface integrity. Ideal for furniture restoration, automotive trim cleaning, light surface sanding, removal of rust flakes or paint bubbles, cleaning inside weld seams, or preparing slightly corroded surfaces for finishing without damaging the base material.
Standout feature – Gentle nylon bristles for soft surface cleaning and finishing tasks
This mini brush set combines assorted shapes on slim shafts to reach tight corners, small parts and detailed areas, providing a controlled, non-abrasive cleaning solution. The nylon construction reduces the risk of scratching, making these brushes especially useful for maintenance, light restoration or fine finishing work on vulnerable or coated surfaces.
-
R67,00
Drill bit diameter: Ø6.35mm
Drill bit: HSS (High-speed steel)
Application:
The drill bit is a replacement pilot drill bit for Bi-metal hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R67,00
Dimensions: 64mm wide x 406mm long
Grit: 320
<!-- ![]()
-->
A sanding belt is a continuous loop of abrasive material used in belt sanders. It’s designed to efficiently remove
material from various surfaces, making it a versatile tool for woodworking, metalworking, and other applications.
We recommend that you make sure of the exact size required for the belt sander as per its specifications. The belt
may slip if it is too long or break if it is too short. A belt that is too short will cause extreme load on the
bearings/bushings, shortening the machine’s lifespan
Application:
- Woodworking: Shaping, smoothing, and removing imperfections from wood.
- Metalworking: Removing rust, burrs, and other surface irregularities from metal.
-
R67,00
Dimensions: 64mm wide x 406mm long
Grit: 240
<!-- ![]()
-->
A sanding belt is a continuous loop of abrasive material used in belt sanders. It’s designed to efficiently remove
material from various surfaces, making it a versatile tool for woodworking, metalworking, and other applications.
We recommend that you make sure of the exact size required for the belt sander as per its specifications. The belt
may slip if it is too long or break if it is too short. A belt that is too short will cause extreme load on the
bearings/bushings, shortening the machine’s lifespan
Application:
- Woodworking: Shaping, smoothing, and removing imperfections from wood.
- Metalworking: Removing rust, burrs, and other surface irregularities from metal.
-
R67,00
Dimensions: 64mm wide x 406mm long
Grit: 180
<!-- ![]()
-->
A sanding belt is a continuous loop of abrasive material used in belt sanders. It’s designed to efficiently remove
material from various surfaces, making it a versatile tool for woodworking, metalworking, and other applications.
We recommend that you make sure of the exact size required for the belt sander as per its specifications. The belt
may slip if it is too long or break if it is too short. A belt that is too short will cause extreme load on the
bearings/bushings, shortening the machine’s lifespan
Application:
- Woodworking: Shaping, smoothing, and removing imperfections from wood.
- Metalworking: Removing rust, burrs, and other surface irregularities from metal.
-
R67,00
SANDING BELT 64 X 406MM 150GRIT 2/PACK
-
R67,00
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts 65mm wide and 410mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 65mm x 410mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R67,00
AirCraft Reducer Brass 1/2" x 1/8" M/F Conical (SB1231P (Packaged))
At a Glance: 1/2" to 1/8" male/female conical brass reducer for stepping between pneumatic connections
Pneumatic systems have a funny way of being perfectly engineered… right up until one fitting doesn’t match. The AirCraft SB1231P (Packaged) conical brass reducer
is the clean fix: it adapts between a 1/2" and a 1/8" connection using a male/female (M/F) layout, letting you bridge sizes on compressors,
regulators, filters, spray equipment and general airline plumbing without rebuilding your setup. Brass construction delivers workshop-tough durability
and corrosion resistance, while the conical sealing style helps create a reliable connection when installed correctly.
AirCraft Brass Fittings – Compact Adaptors For Serious Air Systems
AirCraft brass fittings are made for dependable pneumatic connections where sealing and longevity matter.
This conical reducer keeps your airline neat, serviceable and ready for daily use.
-
R67,00
Length: 200mm
An aluminium tri-handle square is a precision measuring tool commonly used in woodworking, metalworking, and other
crafts. It consists of a square head with three handles attached to it. The head is typically made from anodized
aluminum, which is lightweight yet durable.
Application:
- Marking and angle verification
- Woodworking
- Manufacturing
- DIY
-
R67,00
Size: 24 mm
Application:
Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials.
Bi-metal refers to an object that is composed of two separate metals joined together. Instead of being a mixture of two or more metals, like alloys, bimetallic objects consist of layers of different metals.
- Ideal for cutting stainless steel, mild steel, iron, aluminium, pvc &
wood
- Improved chip clearance
- Cobalt steel
- Alternating tooth patten
- Material release slots to clear material efficiently
- Ultra thin kerf for accurate cuts
- 38mm cut depth for all sizes
- Use mandrel, TC17002, TC17003, TC17007
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R67,00
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts 65mm wide and 410mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 65mm x 410mm
Grits Available: P40, P60, P80, P100, P120 etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R67,00
Hole saw diameter:
ø13mm
Application:
The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.
The hole saw can be used to cut into:
- Mild steel
- Cast iron
- Copper
- Aluminium
- Brass
- Alloy steel
- Fibre-reinforced plastic (FRP)
The pilot drill bits are available separately:
-
R67,00
Size:
12mm
Length: 65mm
Packaging: Carded 1
Application:
The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head
screws.
The nutsetter features:
- Standard six-point design
- Magnet to fold screws
Use with our SNAP-IT! range quick change connectors:
-
R67,00
NUTSETTER MAGNETIC 11X65MM CARDED
-
R67,00
Tork Craft Socket — 27 mm (½″ Drive), CR-V Steel, 12-Point (Model TC64027)
Packaging: Single socket carded
High-performance 27 mm socket from Tork Craft. Crafted from chromium-vanadium alloy steel for resilience, with a ½″ square drive to fit standard workshop ratchets, and a 12-point internal profile for reliable engagement in constrained and high-torque settings. Ideal for mechanical, industrial and maintenance tool kits.
