Showing 1905–1920 of 4680 resultsSorted by latest

  • Aircraft Pu Hose Fitting Manifold 4 X 8Mm Port X 1/2'M

    Aircraft Pu Hose Fitting Manifold 4 X 8Mm Port X 1/2’M

    R66,00

    AirCraft PU Hose Fitting Manifold 4 x 8mm Ports x 1/2" Male (SG APKD08-04)

    At a Glance: 4-Port Manifold: Four 8mm Push-In Outlets with 1/2" Male Thread Inlet

    When you’re dealing with larger pneumatic ports and need to distribute one supply line to multiple outlets neatly, the AirCraft SG APKD08-04 PU hose fitting manifold is built for the job. It features a 1/2" male threaded inlet and four quick push-in ports for 8mm pneumatic tubing—ideal for feeding several valves, actuators or air-assisted stations while keeping your installation clean, organised and easy to service.

    Compact Pneumatic Manifold for Heavy-Duty Multi-Line Distribution

    This manifold-style fitting works like a mini air distribution block: connect it to a 1/2" threaded port, then run up to four 8mm tube lines from the push-in outlets. Perfect for automation, industrial pneumatics and workshop systems where tidy routing and fast maintenance matter.

    Add to cartDone
  • Aircraft Pu Hose Fitting Tee 12Mm X 12Mm X 1/8'M

    Aircraft Pu Hose Fitting Tee 12Mm X 12Mm X 1/8’M

    R66,00

    AirCraft PU Hose Fitting Tee 12mm x 12mm x 1/8" BSP (SG APD12-01)

    At a Glance; 12 mm tube tee with 1/8" BSP male thread for clean, high-capacity air line branching

    The AirCraft SG APD12-01 PU Hose Fitting Tee 12mm x 12mm x 1/8" BSP is a tidy hybrid connector for pneumatic systems where you need to branch a 12 mm tube line and connect into a threaded port at the same time. With two 12 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating larger tubing runs into gauge blocks, compact valves, manifolds and control components—keeping your compressed-air setup neat, reliable and easy to service.

    Hybrid tee: push-in tubing plus 1/8" BSP thread

    This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air line.

    Add to cartDone
  • Aircraft Pu Hose Fitting Tee 10Mm X 10Mm X 1/2'M

    Aircraft Pu Hose Fitting Tee 10Mm X 10Mm X 1/2’M

    R66,00

    AirCraft PU Hose Fitting Tee 10mm x 10mm x 1/2" BSP (SG APD10-04)

    At a Glance; 10 mm tube tee with 1/2" BSP male thread for robust air line branching

    The AirCraft SG APD10-04 PU Hose Fitting Tee 10mm x 10mm x 1/2" BSP is a heavy-duty hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into a larger threaded port in one neat fitting. With two 10 mm push-in tube ports and a 1/2" BSP male thread, it’s ideal for larger manifolds, distribution blocks, valves and workshop air accessories—keeping your pneumatic layout compact, reliable and easy to service.

    Hybrid tee: push-in tubing plus 1/2" BSP thread

    This fitting helps avoid stacked adaptors by combining tube-to-tube branching with a threaded connection point in one compact body. Fewer joins means fewer potential leak points, while the push-in ports make tubing changes quick during maintenance.

    Add to cartDone
  • Aircraft Reducer Brass 3/8X3/8 M/F

    Aircraft Reducer Brass 3/8X3/8 M/F

    R66,00

    AirCraft Reducer Brass 3/8×3/8 Male/Female (SB1224)

    At a Glance: Brass reducer adaptor with 3/8 x 3/8 male/female threads for compact pneumatic connections.

    The AirCraft SB1224 brass reducer is a compact adaptor designed to connect pneumatic components using 3/8 x 3/8 threads, with a male/female configuration.
    It’s ideal for compressed-air assemblies such as couplers, regulators, filters, valves and manifolds where space is limited and you want a tidy, service-friendly connection without extra adaptor stacks.
    Brass construction adds durability and corrosion resistance, helping keep your pneumatic system reliable, leak-resistant and easy to service in everyday workshop use.

    Compact brass adaptor for neat 3/8 pneumatic plumbing

    A clean air system build is mostly about correct fittings and fewer joints. The SB1224 gives you a direct, compact connection option that helps keep your setup tidy and reduces potential leak points.

    Add to cartDone
  • Aircraft Reducer Brass 1/4X1/2 M/F

    Aircraft Reducer Brass 1/4X1/2 M/F

    R66,00

    AirCraft Reducer Brass 1/4×1/2 Male/Female (SB1223)

    At a Glance: Brass reducer adaptor with 1/4 x 1/2 male/female threads for stepping between pneumatic fitting sizes.

    The AirCraft SB1223 brass reducer is a compact adaptor designed to connect pneumatic components while stepping between 1/4 and 1/2 thread sizes, using a male/female configuration.
    It’s ideal for compressed-air assemblies such as couplers, regulators, filters, valves and manifolds where you need a clean size transition without stacking multiple fittings.
    Brass construction adds durability and corrosion resistance, helping keep your pneumatic system reliable, leak-resistant and easy to service in everyday workshop use.

    Compact brass adaptor for stepping from 1/4 up to 1/2 fittings

    When a 1/4 tool-side component needs to connect into a larger 1/2 air circuit, a proper reducer keeps the build neat. The SB1223 helps you step up cleanly, reducing extra joints and improving sealing reliability.

    Add to cartDone
  • Tork Craft Spark Plug 21Mm X 1/2' Drive Crv

    Tork Craft Spark Plug 21Mm X 1/2′ Drive Crv

    R66,00

    Tork Craft Spark-Plug Socket — 21 mm, ½″ Drive (Model TC72021)

    Packaging: Single tool carded/hanger pack — sold as each

    This Tork Craft 21 mm spark-plug socket features a ½″ (12.7 mm) drive and is made from high-quality chromium-vanadium (CR-V) steel. Designed for safe removal and fitting of 21 mm spark plugs in automotive and light-duty engine service. The socket is compact, durable and ideal for mechanic tool kits.

    Add to cartDone
  • Tork Craft Pozi Pz2 X 110Mm Power Bit 1Pc Carded

    Tork Craft Pozi Pz2 X 110Mm Power Bit 1Pc Carded

    R66,00


    Pozi Power Bit – 1/Card

    Size: PZ2
    Length: 110mm
    Torque limit (Nm): 14

    A Pozi power bit is a type of screwdriver bit designed to fit into Pozi-drive screws. It has a cross-shaped tip
    with four points, similar to a Phillips head screwdriver, but with additional points in between the main points.
    This design provides a more secure grip and allows for greater torque, making it ideal for heavy-duty applications.

    Application:

    • For driving screws when using a screw driver.
    • Construction
    • Manufacturing
    • DIY
    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 800 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 800 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 800 Grit, Wet & Dry (10-Pack)

    For fine finishing work, reach for the **Tork Craft P800 water paper**. These sheets are designed to provide a smooth, refined surface ideal for the last sanding stages before topcoats or polishing. The **230 × 280 mm** size fits standard sanding blocks and tools, and the **10-sheet pack** keeps your finishing supplies manageable yet ready for critical jobs.

    Built with **silicon carbide** abrasive, they handle coatings, filler, primer and decorative surfaces well—whether used dry or with light lubrication.
    According to Tork Craft, the 50-sheet variant has dimensions ~285 × 230 × 10 mm and weight ~0.64 kg.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 600 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 600 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 600 Grit, Wet & Dry (10-Pack)

    Step up to a finer finish with Tork Craft P600 water paper. These wet-and-dry sheets balance cutting action with finesse to refine primer, level clear coats, or smooth wood and fillers before topcoat. The standard 230 × 280 mm format fits sanding blocks and sheet sanders, and the 10-pack keeps your kit lean and efficient.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 400 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 400 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 400 Grit, Wet & Dry (10-Pack)

    Fine your final finish with Tork Craft P400 water paper. Ideal for smoothing primer, leveling filler, removing light sanding marks, and preparing surfaces for top coats, this water-resistant sandpaper balances cut with finesse. Supplied in the standard sheet size of **230 × 280 mm** and as a **10-sheet pack**, it gives you flexibility without overstocking.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 320 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 320 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 320 Grit, Wet & Dry (10-Pack)

    Elevate your finish work with Tork Craft 320 grit water paper in the standard 230 × 280 mm size. This wet-and-dry sheet cuts cleanly on paint, filler, metal, plastic, and composites, giving you smoother surfaces for sealing, clear coating or final polish. The 10-pack format gives you a reasonable supply without overstocking.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 1200 Gritwet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 1200 Gritwet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 1200 Grit, Wet & Dry (10-Pack)

    Achieve ultra-fine smoothing and surface refinement with Tork Craft 1200 grit water paper. These premium sheets are suited to detail sanding, polish prep, scratch removal and final finish work on clear coatings, filler, metals, plastics and composites. Supplied in the standard 230 × 280 mm size and as a 10-pack, they offer a balance of precision and convenience.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 120 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 120 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 120 Grit, Wet & Dry (10-Pack)

    Tackle fine smoothing, finishing and intermediate sanding with confidence using Tork Craft P120 water paper. These sheets are made to the standard 230 × 280 mm size and built for both wet and dry sanding. The 10-pack gives you a practical quantity for workshop or on-site use without overstocking.

    The silicon carbide grain offers consistent cutting performance across paint, filler, primer, metal and composite materials. Use wet for reduced dust and cleaner finishes, or dry for fast material removal.

    Add to cartDone
  • Tork Craft Water Paper 230 X 280Mm 60 Grit Wet & Dry 10 Per Pack Std

    Tork Craft Water Paper 230 X 280Mm 60 Grit Wet & Dry 10 Per Pack Std

    R66,00

    Tork Craft Water Paper — 230 × 280 mm, 60 Grit, Wet & Dry (10-Pack)

    Heavy-duty cutting power for tough prep. Tork Craft P60 wet-and-dry sheets use sharp silicon-carbide abrasive to
    rip through paint, rust, body filler and timber fast—wet or dry. The popular 230 × 280 mm size fits sanding blocks and
    1/3-sheet sanders, and the 10-pack keeps jobcards moving without over-stocking.

    Add to cartDone
  • Tork Craft Nutsetter 13Mmx100Mm Bulk

    Tork Craft Nutsetter 13Mmx100Mm Bulk

    R65,00

    Tork Craft Nutsetter 13 mm × 100 mm (Bulk)

    At a Glance: 13 mm hex-nutsetter bit, 100 mm long — for fast, efficient fastening of nuts and bolts with drill or driver

    The Tork Craft TNS205 Nutsetter is a long 100 mm bit designed to fit hex-head nuts, bolts or sheet-metal screws for quick fastening. Its 13 mm hex socket ensures good grip on matching fasteners, letting you drive nuts or bolts consistently with a drill or impact driver. It’s a simple but effective tool for metal fabrication, assembly work, sheet-metal fixing, or any project where you need to drive many fasteners quickly and reliably.

    Standout feature – Convenient 100 mm nutsetter for efficient screw/nut work

    With a 13 mm hex interface and 100 mm shaft length, this nutsetter gives you reach and control — useful when working on assemblies, sheet-metal fastening, or in spaces where a regular wrench might be awkward or slow. Its bulk-pack format makes it practical for workshops or tradespeople needing multiple bits for repetitive screwdriving tasks.

    Add to cartDone
  • Tork Craft Glass & Tile Drill 4Mm Hex Shank Industrial

    Tork Craft Glass & Tile Drill 4Mm Hex Shank Industrial

    R65,00


    Glass & Tile Drill Bit

    Tip Diameter: 4mm
    Shank Type: Hex Shank
    Classification: Industrial (Blue)

    <!-- -->

    This 4mm Hex Shank Industrial Glass & Tile Drill Bit is a premium cutting tool specifically engineered for creating
    precise, medium-sized holes in hard, brittle materials. Featuring a 4mm diameter tip, it is perfectly sized for
    standard small anchor fittings, towel bar mounts, and general purpose applications where a robust, clean hole is
    required. This tool is designed to consistently deliver the professional finish necessary for permanent
    installations.

    The cutting head utilizes a highly durable material, typically a specialized carbide alloy or a precision-ground
    diamond tip. This superior material is crucial for maintaining edge integrity and providing maximum service life
    when drilling through extremely tough surfaces like porcelain, ceramic tiles, plate glass, mirrors, and engineered
    stone. This industrial construction ensures durability, though proper technique, including low drilling speeds and
    constant water cooling, is vital for optimal performance and longevity.

    For unmatched compatibility and stability, the drill bit incorporates a standard 1/4′ hex shank. This design
    prevents slippage and rotation within the chuck, providing a secure lock into quick-change systems, standard drill
    chucks, and impact drivers. This versatility ensures efficient power transfer, making the 4mm Hex Shank Industrial
    Glass & Tile Drill Bit an indispensable, reliable asset for professional tradespeople and dedicated DIYers tackling
    high-demand projects.

    Application:

    • For precision drilling in glass, mirrors, ceramic and marble tiles.
    • Manufacturing
    • Construction
    • DIY
    Add to cartDone

Powered by