“Tork Craft Flap Wheel 50 X 20 X 6Mm Shaft 80 Grit Per Each” has been added to your cart.
View cart
Showing 2273–2288 of 4680 resultsSorted by latest
-
R51,00
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts
30mm wide and
451mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 30mm x 451mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R51,00
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts
30mm wide and
451mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 30mm x 451mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R51,00
Size : 9MM
Application:
The Tork Craft Offset combination spanners features an anti-slip design open
ended and closed ring profile, it has an offset angle for usage in confined
spaces, for automotive, DIY, construction & manufacturing
- Anti-slip design
- Open ended and closed ring profile
- Offset angle for usage in confined spaces
-
R51,00
Diameter: 3 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R51,00
Size: PH2
Length: 90mm
Torque limit: 14Nm
A Phillips impact power bit is a specialized tool designed for use with impact drivers to drive and remove
Phillips-head screws. It’s crafted from high-quality materials and features a unique design that enhances its
durability and performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R51,00
Size: PH 1
Length: 100 mm
Application:
The
Tork Craft screwdriver is designed to be ergonomic and wear resistant. The tip has been hardened for optimum durability.
The blade is made of CrV (Chrome Vanadium Steel)
- Ergonomic & Wear resistant
- Tip hardened for optimum durability
- Blade made of Chrome Vanadium Steel
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R51,00
The flap a
wheel has a ø6mm steel shank and it runs through
the wheel creating better balance to reduce operator fatigue. Used with portable
drills or die grinders.
SIZE: ø50mm
WIDTH: 20mm
SHANK: Ø6mm
GRIT: P80
Application:
These flap wheels
are used in the metal fabrication and welding industry for stock removal,
blending, deburring, cleaning, finishing and polishing.
Designed to deliver a consistant finish with a uniform rate of cut. Flap wheels
wear away, continually exposing new Aluminium Oxide abrasives. These abrasives
are a good choice for hard-to-grind materials such as aluminium, bronze, brass,
stainless steel, carbon steel and titanium.
Flap wheels can be used for achieving a satin finish on steel, aluminium, brass
and hard plastics.
Wear eye, face, body and respiratory protection.
-
R51,00
AirCraft Elbow 12mm-1/8" M BSP PU Hose Fitting
At a Glance: 12mm push-in tube connection to 1/8" Male BSP thread in a compact 90° elbow.
Larger tube size, tidy corner turn—no wrestling the hose into shape. The AirCraft Elbow 12mm-1/8" M BSP PU Hose Fitting is a push-in pneumatic elbow connector that joins 12mm tubing to a 1/8" BSP female port, giving you a clean 90° bend right at the connection point. It’s ideal for compressed-air installations where you want neat routing, reduced tube stress, and easier maintenance on compressors, FRLs, regulators, manifolds and pneumatic tool systems.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings
Practical push-in pneumatic connections designed for fast installs, neat routing and easy servicing in workshop and industrial air systems.
-
R51,00
AirCraft Brass Conical Straight 5/16" Tube x 1/8" M (SB6805A)
At a Glance: Conical tube-to-thread straight fitting: 5/16" tube to 1/8" male connection
Need to run 5/16" pneumatic tubing into a standard 1/8" port without turning your system into a stack of adaptors? The AirCraft SB6805A
brass conical straight fitting gives you a clean, compact tube-to-thread connection in a straight-through layout. It’s ideal for compressed-air
circuits, manifolds, air preparation units and general pneumatic plumbing where space, sealing and serviceability all matter. Brass construction
delivers durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing when installed
correctly.
AirCraft Brass Conical Tube Fittings – Neat Tube-To-Port Adaptation
AirCraft tube fittings are built for practical, serviceable pneumatic layouts.
This straight connector gives you a tidy transition from 5/16" tube to a 1/8" male-thread port without bulky adaptors.
-
R50,00
AirCraft PU Hose Connector 8mm ID x 10mm OD Metal German Coupler Insert (SG BX0810)
At a Glance: German-style quick-coupler insert for PU hose: 8 mm ID x 10 mm OD
The AirCraft SG BX0810 PU Hose Connector 8mm ID x 10mm OD Metal German Coupler Insert is the reliable way to finish off a PU air hose so it clicks straight into a German-style quick coupler. Built from metal for durability, this insert/plug provides a solid connection point for compressed air lines, making it ideal for workshop compressors, pneumatic tools, and general air-line plumbing. Sized for hose with an 8 mm inner diameter and 10 mm outer diameter, it helps keep your system tidy, secure, and ready for quick tool changes.
German Coupler Insert For Fast Tool Changes And Solid Airflow
Fit this connector to your PU hose end and you get quick, repeatable coupling with compatible German-style couplers—perfect for switching between tools without fuss while maintaining a dependable air connection.
-
R50,00
AirCraft PU Hose Connector 6mm ID x 8mm OD Metal German Coupler Insert (SG BX0608)
At a Glance: German-style quick-coupler insert for PU hose: 6 mm ID x 8 mm OD
The AirCraft SG BX0608 PU Hose Connector 6mm ID x 8mm OD Metal German Coupler Insert is the neat, reliable way to finish off a PU air hose so it clicks straight into a German-style quick coupler. Built from metal for durability, this insert/plug provides a solid connection point for compressed air lines, making it ideal for workshop compressors, pneumatic tools, and general air-line plumbing. Sized for hose with a 6 mm inner diameter and 8 mm outer diameter, it helps keep your system tidy, secure, and ready for quick tool changes.
German Coupler Insert For Fast Tool Changes And Solid Airflow
Fit this connector to your PU hose end and you get quick, repeatable coupling with compatible German-style couplers—perfect for switching between tools without fuss while maintaining a dependable air connection.
-
R50,00
FIXMAN 1/2′ DRIVE E-SOCKET 6 POINT E24
-
R50,00
FIXMAN S/DRIVER POZI PZ1 5X75MM CRV WITH ERGONOMIC HANDLE
-
R50,00
FIXMAN S/DRIVER SLOTTED 5.5X1X100MM CRV WITH ERGONOMIC HANDLE
-
R50,00
FIXMAN S/DRIVER SLOTTED 5.5X1X75MM CRV WITH ERGONOMIC HANDLE
-
R50,00
Tork Craft Nutsetter 6 mm × 100 mm (Bulk)
At a Glance: 6 mm hex-nutsetter bit, 100 mm long — for fast, efficient fastening of nuts and bolts with drill or driver
The Tork Craft TNS201 Nutsetter is a long 100 mm bit designed to fit hex-head nuts, bolts or sheet-metal screws for quick fastening. Its 6 mm hex socket ensures good grip on matching fasteners, letting you drive nuts or bolts consistently with a drill or impact driver. It’s a simple but effective tool for metal fabrication, assembly work, sheet-metal fixing, or any project where you need to drive many fasteners quickly and reliably.
Standout feature – Convenient 100 mm nutsetter for efficient screw/nut work
With a 6 mm hex interface and 100 mm shaft length, this nutsetter gives you reach and control — useful when working on assemblies, sheet-metal fastening, or in spaces where a regular wrench might be awkward or slow. Its bulk-pack format makes it practical for workshops or tradespeople needing multiple bits for repetitive screwdriving tasks.
