Showing 2913–2928 of 4680 resultsSorted by latest
A durable 15.5 mm drill bit made from high-speed steel (HSS), featuring a reduced shank so that a larger cutting diameter can be accommodated by chucks with lesser grip capacity. Excellent for heavy fabrication, metalworking and general workshop tasks.
Core diameter: Ø45mm
Depth: 72mm
Adaptor thread: M22
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
At a Glance: Inline on/off valve with 8mm push-in connections (8mm to 8mm)
Get instant, local control over your compressed-air line with the AirCraft SHVFF08-08 PU Hose Fitting Valve 8mm x 8mm. This compact inline valve is designed to slot
neatly into 8mm pneumatic hose runs using push-in connections on both ends, making it easy to start/stop airflow exactly where you need it. Ideal for isolating a tool,
workstation or machine feed, it helps streamline maintenance and troubleshooting without shutting down the entire air system.
Install it at the point of use for simple isolation and safer servicing—perfect for tidy pneumatic layouts and busy workshops.
Diameter: 19 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
Cutting and tapping fluid in an aerosol.
Volume: 400ml
Machining cut fluid, also known as coolant or metalworking fluid, is a crucial substance used in various metalworking
processes, such as turning, milling, drilling, and grinding. Its primary functions are to:
Application:
FIXMAN
reversible combination ratchet wrenches are made of durable chrome vanadium steel. The design includes
an increased working surface and micro finish. Available in sizes 6 to 32mm.
The Tork Craft TCIM21017 impact-rated deep socket is built for demanding tasks. Featuring a 17 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
The Tork Craft TCIM21016 impact-rated deep socket is built for demanding tasks. Featuring a 16 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
The Tork Craft TCIM21015 impact-rated deep socket is built for demanding tasks. Featuring a 15 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
The Tork Craft TCIM21012 impact-rated deep socket is built for demanding tasks. Featuring a 12 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
The Tork Craft TCIM21011 impact-rated deep socket is built for demanding tasks. Featuring a 11 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
Diameter: Ø150mm
Use backing pad:
TCBP150C
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
TIP:
The buff is washable after use if the polishing compound is soluble.
| ORDER NO. | DIAMETER | USE BACKING PAD |
| MM4 | ø100mm | |
|
MM5 |
ø125mm |
TCBP125C / PG338 |
|
MM6 |
ø150mm |
TCBP150C |
|
MM7 |
ø180mm |
PG33805 |
|
MM7-2 |
ø180mm |
PG33805 |
|
MM8 |
ø200mm | |
|
MM9 |
ø230mm | |
|
MM9-2 |
ø230mm | |
|
MM10 |
ø250mm |
Packaging: Carded (for retail display)
This 4-24 mm V-point rotary rasp from Tork Craft gives you a tapering cutting profile that excels when you need to remove material quickly and cleanly. Whether you’re shaping wood, trimming plastic or removing light weld spatter from soft metals, the V-point geometry accelerates cut-action, while the hardened steel body and standard ¼″ (6.35 mm) shank make it a versatile addition to your bit collection.
Hole saw diameter:
ø59mm
Use mandrel:
TC17007
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
Compatible with all belt sanders that require sanding belts 60mm wide and
400mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
Tork Craft Auger Bit 19 X 300Mm Bulk
1 × R146,00 
Tork Craft Drill Hss 10.5Mm 135Deg 1/Card Industrial Bit
1 × R132,00 
Tork Craft Jigsaw Blade Set 10 Pce For Metal & Wood T - Shank
1 × R132,00 
Tork Craft Screw Pilot No.6 Carded
1 × R149,00 
Tork Craft Double End Stubby Hss 3.5Mm Packet Of 10
1 × R134,00 Tork Craft Hollow Core Bit Tct 45 X 72Mm M22
1 × R147,00 Subtotal: R840,00