“Tork Craft Hole Saw Carbide Grit 29Mm – Red” has been added to your cart.
View cart
Showing 2977–2992 of 4680 resultsSorted by latest
-
R138,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R138,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P100
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
-
Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R138,00
Tork Craft Fibre Disc — 180 mm, 80 Grit (5-Pack)
Blend welds, strip coatings and power through rust with the Tork Craft 180 mm P80 fibre discs. The larger 7" format covers more area per pass, while the tough resin-bonded fibre backing runs cool and flat on a suitable backing pad. P80 (medium) grit delivers a fast, controlled cut that steps neatly to finer grits. Supplied as a 5-pack to keep your workflow moving.
-
R138,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P60
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
-
Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R138,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P36
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
-
Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R138,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P24
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
-
Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R138,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P16
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
-
Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R138,00
Hole saw diameter:
ø29mm
Use mandrel:
TC17002-2
Application:
The hole saw’s cup design is manufactured from a special alloy steel and the
cutting edges are Tungsten Carbide gritted. It is specially designed to drill
into abrasive materials.
The hole saw can be used to cut into:
- Fiberglass
- Kevlar
- Asbestos
- Graphite
- Carbon
- Brick
- Tiles
- Plaster slabs
- Walls
- Light stones
- Weatherboard
IMPORTANT:
Do not use with hammer/percussion action or to drill into concrete.
-
R138,00
Die Compatibility: Ø38 x 14mm
<!-- ![]()
-->
A die holder is a crucial component in various manufacturing processes, particularly those involving the shaping or
cutting of materials. It is a specialized tool designed to securely hold and position dies, which are the tools that
actually perform the shaping or cutting operation.
The primary function of a die holder is to provide a stable and accurate platform for the die. This ensures that the
die is properly aligned and positioned, which is critical for achieving precise and consistent results in the
manufacturing process. Die holders are often equipped with mechanisms for adjusting and locking the die in place,
allowing for fine-tuning of the process and accommodating different die sizes and shapes.
In addition to holding the die, die holders also serve to protect the die from damage. The holder absorbs some of
the forces generated during the manufacturing process, reducing wear and tear on the die itself. This can help to
extend the life of the die and reduce the frequency of replacements.
Die holders are used in a wide range of industries, including metalworking, plastics manufacturing, and food
processing. They are essential for a variety of processes, such as stamping, punching, shearing, and threading. The
specific design and features of a die holder will vary depending on the particular application and the type of die
being used.
Application:
- Machining
- Contractor
- Automotive
- DIY
-
R137,00
Tork Craft Magnetic Bit Holder — 75 mm, One-Touch Quick-Release, 1/4′ Hex (Model T-BH21010075)
Extend your reach and speed up bit changes. The Tork Craft T-BH21010075 is a 75 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4′ hex shank. It firmly grips standard 1/4′ hex bits while giving extra clearance for fastener access in recessed or awkward spaces.
-
R137,00
Tork Core Craft Socket — 28 mm (½″ Drive), CR-V Steel, Deep Length, 12-Point (Model TC66028)
Display Packaging: Single socket carded
The Tork Craft 28 mm deep socket (½″ drive) is manufactured from chromium-vanadium alloy steel, offering strength and precise engagement with a 12-point internal profile. Designed for recessed or hard-to-reach fasteners where standard sockets fall short. Suitable for mechanical, maintenance, and tool-kit applications.
-
R137,00
Size: PH 2
Length: 300 mm
Application:
The
Tork Craft screwdriver is designed to be ergonomic and wear resistant. The tip has been hardened for optimum durability.
The blade is made of CrV (Chrome Vanadium Steel)
- Ergonomic & Wear resistant
- Tip hardened for optimum durability
- Blade made of Chrome Vanadium Steel
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R137,00
AirCraft Metal PU Fitting T-Joint 10mm x 1/4′ Male (SG MPT10-02)
At a Glance; 10mm push-in T fitting with a 1/4" male threaded branch for clean air line splitting.
The AirCraft SG MPT10-02 Metal PU Fitting T-Joint makes it easy to branch a 10mm pneumatic line into a common 1/4" threaded port—neatly and reliably. It connects two 10mm pneumatic/PU tubes in-line and adds a 1/4" male threaded outlet for a secondary connection, ideal for installing a gauge, valve, regulator feed or an extra air line. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy, serviceable and reliably sealed.
Branch your 10mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a threaded port for accessories or branch connections.
-
R137,00
AirCraft Metal PU Fitting T-Joint 10mm x 1/8′ Male (SG MPT10-01)
At a Glance; 10mm push-in T fitting with a 1/8" male threaded branch for clean air line splitting.
The AirCraft SG MPT10-01 Metal PU Fitting T-Joint is a compact, workshop-ready way to add a branch connection to a 10mm pneumatic line while keeping the layout neat and serviceable. It connects two 10mm pneumatic/PU tubes in-line and provides a 1/8" male threaded outlet for a secondary connection—ideal for a gauge, valve, regulator feed or an extra air line. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy and reliably sealed.
Branch your 10mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a threaded port for accessories or branch connections.
-
R137,00
Tork Craft Replacement Jaw Set — For 350 mm Heavy-Duty Pipe Wrench
Give your 350 mm heavy-duty pipe wrench a new lease of life with this genuine Tork Craft jaw set. Designed to fit the 350 mm wrench model (TC602350), this set includes both jaws (left/right) and the required mounting hardware, restoring firm grip and alignment so you can continue plumbing, construction or maintenance work with confidence.
-
R137,00
Tork Craft Blade TCT 180 × 60 T — General Purpose Combination Wood
Size: 180 mm diameter × 60 teeth [Bore: 30/20/16 mm]
This 180 mm diameter Tork Craft TCT saw blade features 60 carbide-tipped teeth and a multi-bore hub (30 mm / 20 mm / 16 mm). It’s ideal for both ripping and cross-cutting wood and sheet materials, offering versatility, broad machine compatibility and a smoother finish than lower-tooth blades.
