“Tork Craft Buffing Pad – Medium 100Mm To Fit 12.5Mm Arbor/Spindle” has been added to your cart.
View cart
Showing 3121–3136 of 4681 resultsSorted by latest
-
R120,00
AirCraft Metal Swivel Elbow 8mm x 3/8′ Male (SG MPH08-03)
At a Glance; 8mm push-in tube connection to 3/8" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH08-03 Metal Swivel Elbow is made for pneumatic systems that need a clean corner turn into a larger threaded port—without twisting the tubing or compromising the seal. It connects 8mm pneumatic tubing to a 3/8" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening. That means cleaner routing, less strain on the line and a more dependable, leak-resistant connection. Ideal for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where space is limited and reliability matters.
Strong, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector for 8mm tubing and larger pneumatic ports—keeps routing tidy and alignment easy.
-
R120,00
AirCraft Metal Swivel Elbow 6mm x 1/2′ Male (SG MPH06-04)
At a Glance; 6mm push-in tube connection to 1/2" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH06-04 Metal Swivel Elbow is the practical fix for pneumatic lines that need a clean corner turn into a larger threaded port. It connects 6mm pneumatic tubing to a 1/2" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening—helping prevent twisted tubing and reducing stress that can cause leaks. With sturdy metal construction, it’s well suited to workshop compressed-air systems, manifolds, regulators, valves and pneumatic control equipment where strong connections and tidy routing are essential.
Strong, alignment-friendly 90° AirCraft swivel elbow fitting
A durable metal elbow connector for larger threaded ports—keeps tubing neat and allows precise alignment for professional pneumatic layouts.
-
R120,00
Buffing pad density:
Medium
Diameter: Ø100mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R119,00
Grit: #3000
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R119,00
Grit: #2000
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R119,00
Tork Craft Magnetic Bit Holder — 80 mm (SDS-Plus ⟶ 1/4″ Hex, Quick-Change)
Packaging: Carded (for retail display)
Snap the SDS-Plus shank into your rotary hammer and drive standard 1/4″ hex bits instantly. The one-touch quick-change sleeve speeds bit swaps, while the magnet helps hold bits and screws during starts. Ideal when you’re bouncing between masonry drilling and fixings (set hammer to drill-only when driving).
-
R119,00
Everything
you need to dowel joints in this one convenient kit.
Includes:
- (x15) Fluted dowel pins 10x40mm
- (x4) Dowel centers
- (x1) 10mm brad point drill bit
- (x1) 10mm drill stop collar
- (x1) hex key wrench
Application:
The doweling accessory set includes everything needed to conveniently join
with dowels.
- The process starts with having the collar fastened onto the drill bit to
the correct depth position. In this case it would be 20mm.
- Up to 4 holes per side can be drilled with the 10mm brad point drill to
the correct positions.
- The dowel centers are then inserted into the already drilled holes. It
is used to transfer the center points to the other piece of wood.
- A rubber mallet or suitable hammer can then be used to transfer the
center marks.
- Repeat step 2 to have the correct depth drilled holes on the other side.
- Clean out the drilled holes of excess dust and debris.
- Glue can be then be applied to the holes and the dowels can be
inserted. Make use of clamps to keep the join secured until the glue has
set.
Dowels can also be used for:
- Furniture shelf supports.
- Supports for hanging items such as clothing, key rings, tools etc.
- Joinery.
Dowel-based joinery typically employs fluted dowel pins. A fluted dowel pin has
a series of parallel grooves cut along its length.
Why
are the dowels fluted?
The
fluting provides channels through which excess glue (which is used to secure the
dowel pin in its hole) can escape as the dowel is inserted, thereby relieving the
hydraulic pressure that might otherwise split the timber when clamped together.
-
R119,00
Clamping
length:
150mm
Throat: 50mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
- Wood assembly and joinery (screws, glue, biscuits).
- Clamping down edging to board material.
Use in metalworking:
- Holding pieces together for welding.
- Holding and aligning pieces together for drilling and bolting.
Other uses:
- Securing workpieces to a bench or a template.
Features:
- Non-marking pressure pads to prevent surface damage.
- All steel construction ensures durability and added strength.
- Wooden handle for added grip.
-
R119,00
Tork Craft Blade TCT 150 × 40 T — General Purpose Combination Wood
Size: 150 mm diameter × 40 teeth [Bore: 20/16 mm]
This 150 mm Tork Craft TCT saw blade features 40 carbide-tipped teeth and dual bore compatibility (20 mm or 16 mm), giving you a blade optimised for both ripping and cross-cutting wood. Ideal for general-purpose use where a finer finish is desired without sacrificing versatility.
-
R119,00
2500 GRIT ZIRCONIA SANDING BELTS 40MMX620MM
-
R119,00
1200 GRIT ZIRCONIA SANDING BELTS 40MMX620MM
-
R119,00
1000 GRIT ZIRCONIA SANDING BELTS 40MMX620MM
-
R119,00
AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery of spitting, uneven lines, and “why is it doing that?†frustration.
The AirCraft SG NE02 is a replacement 0.3mm needle designed for the A130 (and compatible A180) airbrush setup, helping restore clean paint delivery, smoother trigger response, and a more predictable spray pattern.
It’s the right spare to keep your airbrush performing like it should—especially for fine detail work and controlled finishing.
Standout feature: Restores fine-line performance on A130 0.3mm setups
Replace a worn or damaged needle to recover smoother flow, better control, and a cleaner spray pattern—especially when detail work starts looking fuzzy or inconsistent.
-
R119,00
AirCraft Needle For A182 0.5mm (SG NE01)
At a Glance: Replacement needle for AirCraft Airbrush A182 0.5mm setup—brings back smooth flow and consistent spray control.
A needle is the quiet hero of a good spray finish: when it’s bent, worn, or nicked, your pattern starts misbehaving and your day gets longer.
The AirCraft Airbrush SG NE01 is a replacement 0.5mm needle made for the Airbrush A182 setup, helping restore clean, controlled paint delivery and predictable trigger response.
Perfect for routine maintenance, tune-ups, or keeping a spare on hand so you can get back to spraying instead of troubleshooting.
Standout feature: Restores spray consistency on an Airbrush A182 0.5mm setup
Swap the needle to recover smoother flow, better control, and a more reliable spray pattern—especially when performance drops due to wear or accidental tip damage.
-
R119,00
Slot-head size:
4.0mm
Length: 300mm
Application:
The screwdriver is designed to be ergonomic and wear resistant. The tip
has been hardened for optimum durability.
NOTE:
The screwdriver is not insulated.
-
R119,00
Tork Core Craft Socket — 27 mm (½″ Drive), CR-V Steel, Deep Length, 12-Point (Model TC66027)
Display Packaging: Single socket carded
The Tork Craft 27 mm deep socket (½″ drive) is manufactured from chromium-vanadium alloy steel, offering strength and precise engagement with a 12-point internal profile. Designed for recessed or hard-to-reach fasteners where standard sockets fall short. Suitable for mechanical, maintenance, and tool-kit applications.
