Showing 3809–3824 of 4681 resultsSorted by latest
Shank:
T-shank
Distance between teeth: 1.3mm
Total length: 77mm
Teeth Per Inch: 20TPI
Packaging: Pack of 2
The jigsaw blades are used to cut:
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
Packaging: Single deep socket carded
The Tork Craft 11 mm deep socket (¼″ drive) is engineered from chromium–vanadium steel for robustness and durability. With a 12-point profile for superior engagement and extended length to access recessed fasteners, it’s a smart addition to your workshop or toolbox when standard sockets cannot reach.
Daimeter: Ø18.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
StandardNotice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
Daimeter: Ø17.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
StandardNotice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
Carded Pack: Qty 1
Application:
What you need to cut internal threads:
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Drill diameter: Ø7.5mm
Packaging: Carded 1
Point: 118°
Drill bit: HSS (Hi-speed steel)
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:
Slot-head
size:
6mm
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Carded 2
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
25mm (Carded 2):
Slot-head 3.0 x 25mm –
T SL0325C
Slot-head 4.0 x 25mm –
T SL0425C
Slot-head 5.0 x 25mm –
T SL0525C
Slot-head 6.0 x 25mm –
T SL0625C
Slot-head 8.0 x 25mm –
T SL0825C
50mm (Carded 1):
Slot-head 3.0 x 50mm –
T SL0350C
Slot-head 4.0 x 50mm –
T SL0450C
Slot-head 5.0 x 50mm –
T SL0550C
Slot-head 6.0 x 50mm –
T SL0650C
Slot-head 8.0 x 50mm –
T SL0850C
Slot-head 10.0 x 50mm –
T SL1050C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Slot-head
size:
4mm
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Carded 2
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
25mm (Carded 2):
Slot-head 3.0 x 25mm –
T SL0325C
Slot-head 4.0 x 25mm –
T SL0425C
Slot-head 5.0 x 25mm –
T SL0525C
Slot-head 6.0 x 25mm –
T SL0625C
Slot-head 8.0 x 25mm –
T SL0825C
50mm (Carded 1):
Slot-head 3.0 x 50mm –
T SL0350C
Slot-head 4.0 x 50mm –
T SL0450C
Slot-head 5.0 x 50mm –
T SL0550C
Slot-head 6.0 x 50mm –
T SL0650C
Slot-head 8.0 x 50mm –
T SL0850C
Slot-head 10.0 x 50mm –
T SL1050C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
At a Glance: Conical tube-to-thread straight fitting: 5/32" tube to 1/8" male connection
When you need to connect small-bore tubing to a standard pneumatic port, a proper tube-to-thread fitting keeps the job neat and leak-conscious.
The AirCraft SB6802A brass conical straight fitting adapts 5/32" tubing to a 1/8" male-thread connection in a compact straight-through
layout—ideal for control lines, air preparation units, compact pneumatic assemblies and general compressed-air plumbing. Brass construction offers
durability and corrosion resistance, while the conical connection style is designed to seat securely when installed correctly.
AirCraft tube fittings are made to keep pneumatic layouts practical and serviceable.
This straight connector gives you a tidy transition from 5/32" tube to a 1/8" male-thread port without bulky adaptors.
Packaging: Carded (for retail display)
A compact two-piece kit pairing a left-hand drill bit with a No.2 spiral extractor. Drill a reverse-rotation pilot to loosen the broken fastener, then drive the extractor to back it out cleanly. Ideal for workshop maintenance, fabrication and field repairs.
At a Glance: Compact 38 mm shaft-mounted wire wheel brush for drill-powered cleaning and surface prep on small metal parts
The Tork Craft TCWW3806 38 mm wire wheel brush is a handy drill-compatible accessory designed to remove rust, old paint, scale, corrosion and debris from small metal surfaces, weld seams, castings, brackets and other medium-to-small components. Its small 38 mm diameter and 6 mm shaft make it perfect for cleaning narrow spots, inner corners and hard-to-reach areas where larger brushes cannot access — making it suitable for both home-workshop and professional maintenance use.
This 38 mm wire wheel brush gives you precise control and maneuverability — ideal when working on small components, tight spaces or detailed metal work where a larger wheel would be unwieldy. It’s a versatile option for metal prep, refurbishing, maintenance and restoration tasks when cleanup detail matters over coverage.
Application:
At a Glance: Conical male-to-male nipple adaptor with 1/8 x 1/8 thread size for pneumatic connections. Packaged for display
The AirCraft SB1205P conical nipple is a compact male-to-male adaptor designed for joining two pneumatic components with matching 1/8 x 1/8 threads.
It’s ideal for building or repairing compressed-air lines, connecting couplers, valves, regulators, gauges, manifolds and other air system hardware where space is tight and a secure threaded connection is essential.
A quality nipple adaptor helps keep your air system tidy, leak-resistant and easy to service—because nothing ruins workshop vibes like chasing tiny air leaks for an hour.
Small fittings do big work in compressed-air setups. The SB1205P is a handy go-to connector for quick repairs and clean assemblies, helping you join components properly without awkward workarounds.
Application:
To loosen or tighten screws to a desired material. Technicians, hobbyist and DIY
users.
Application:
To loosen or tighten screws to a desired material. Technicians, hobbyist and DIY
users.
Size/Length: 8 mm Hex × 65 mm Length
The Tork Craft 8 × 65 mm magnetic impact nutsetter is built for speed and reliability in repetitive fastening applications. With its magnetised tip and impact-rated design it holds the fastener securely and performs reliably when used with impact drivers, making it ideal for production lines, sheet-metal assembly, workshop use or any task where one-hand loading and quick cycles count.
Size range: 40mm to 43mm
<!-- -->
The Heavy Duty Hose Clamp is a robust and reliable fastening solution designed for demanding applications. Crafted
from durable materials, this heavy-duty hose clamp provides exceptional gripping power for hoses with an outer
diameter ranging from 40mm to 43mm. Its superior construction ensures a secure and leak-proof seal, even under high
pressure or vibration, making it ideal for automotive, industrial, marine, and agricultural uses where a strong,
long-lasting connection is paramount. Supplied in bulk, it offers an economical choice for professionals requiring a
consistent supply of high-performance hose clamps.
Application: