“Tork Craft Combination Spanner 6Mm” has been added to your cart.
View cart
Showing 3857–3872 of 4681 resultsSorted by latest
-
R30,00
Drill bit diameter: Ø6.35mm
Drill bit: TCT (Tungsten Carbide Tipped)
Application:
The drill bit is a replacement pilot drill bit for Tungsten Carbide Tipped
(TCT) hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R30,00
AirCraft Red Insert T-Joint Side PU 6mm – 4mm (SG APDJ06-04)
At a Glance; Reducing side-branch tee: 6 mm main line with 4 mm branch outlet
The AirCraft SG APDJ06-04 Red Insert T-Joint Side PU 6mm – 4mm is a smart space-saver for pneumatic systems that need a smaller branch line off a larger main run. It allows a 6 mm tube line to pass through the fitting while providing a neat 4 mm side take-off—perfect for feeding a smaller valve, gauge, airbrush line, pilot line, or accessory without reworking your entire air layout. The push-in connections make installation quick and maintenance painless.
Standout feature: reducing side tee for mixed tube sizes
This side-branch tee helps you keep a stronger 6 mm main line for airflow, while stepping down to a 4 mm branch where compact routing is needed. The colour-coded (red) body makes identification easier in busy panels and workshop setups.
-
R30,00
AirCraft Red Insert T-Joint PU 6mm – 4mm (SG APBJ06-04)
At a Glance; Reducing push-in tee: 6 mm main line to 4 mm branch connections
The AirCraft SG APBJ06-04 Red Insert T-Joint PU 6mm – 4mm is the smart way to split and step down your air line in one clean fitting. It lets you run a 6 mm supply tube through the tee while feeding out to 4 mm branches—perfect for compact pneumatic circuits, airbrush stations, small regulators, and bench setups where you want a larger main feed with lighter, more flexible branch lines.
One fitting to branch and reduce
This reducing tee saves space and simplifies installations by combining two jobs: branching your line and adapting tube size. The push-in collet design grips securely and releases easily when you need to reroute or service your tubing.
-
R30,00
Drill diameter: Ø9.0mm
Packaging: Carded 1
Drill bit: TCT (Tungsten carbide tipped)
Application:
The drill bit is used to drill holes in masonry
or concrete, thanks to the
uniquely designed TCT (tungsten carbide tipped) point.
A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the
depth gauge on the drill to achieve the correct depth before drilling into
walls.
TIP:
Have a wall scanner (detector) ready before drilling into walls.
CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break
the conversion chuck.
-
R30,00
Size: T40
Short side: 27mm
Long side: 124mm
An L-wrench torx key is a simple yet essential hand tool used to tighten or loosen bolts and screws with a torx
socket head. It’s shaped like an ‘L,’ with a Torx bit at one end and a longer arm for leverage. This design allows
for better grip and torque application compared to a standard Torx screwdriver.
Application:
- Used to drive bolts and screws with star-shaped with 6-point sockets
- Manufacturing
- Automotive
- Electronics
- Construction
- DIY
-
R30,00
The Tork Craft Plastic Square ABS is a versatile and essential tool for woodworking, carpentry, and DIY projects.
Crafted from high-quality ABS plastic, this square offers durability, accuracy, and lightweight convenience. Its
precise measurements and sturdy construction make it ideal for both professional tradespeople and hobbyists.
Application:
- DIY
- Assembly
- Woodworking
- Manufacturing
-
R30,00
AirCraft PU Hose Fitting Y Joint 12mm (SPY12)
At a Glance: Push-in Y-splitter for 12mm PU hose—branch one line into two in seconds.
The AirCraft SPY12 PU Hose Fitting Y Joint 12mm is a clean, compact solution for splitting a single 12mm pneumatic line into two 12mm PU hose runs. It’s ideal for workshop air routing, pneumatic control circuits, and machine installations where you want a tidy branch line without piling on adaptors. With a push-in (one-touch) design, installation is quick—push the hose in to lock, and release when you need to re-route or service. The result is a neat, service-friendly air line layout that helps keep systems organised and running smoothly.
Standout feature: All-push-in 12mm Y splitter for quick, tidy branching
No threads, no fuss—just straightforward 12mm-to-12mm branching with push-in convenience for fast installs and easy changes.
-
R30,00
AirCraft PU Hose Fitting Tee 8mm x 8mm x 1/4" BSP (SG APD08-02)
At a Glance; 8 mm tube tee with 1/4" BSP male thread for neat air line branching
The AirCraft SG APD08-02 PU Hose Fitting Tee 8mm x 8mm x 1/4" BSP is a reliable hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into equipment with a threaded port. With two 8 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your pneumatic layout compact, tidy and easy to service.
Hybrid tee: push-in tubing plus 1/4" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means fewer potential leak points and a cleaner installation overall.
-
R30,00
Size: 6 mm
Application:
The Tork Craft Combination spanners have two heads. One with an open-ended profile and the other with a ring profile. Combination spanners are good value for money as you get two tools for the price of one, note that both the heads are the same size so you only get one size per spanner.
The looped end of the combination spanner comes in contact wth all sides of a fastener thus it provides a better grip and is less likely to slip while turning.
Made from hardened chrome vanadium steel
- Hexagonal shape head
- The looped end of the cominbation spanner comes in contact with all
sides of a fastener, thus it provides much better grip and is less likely to
slip
- The closed profile is more preffered for turning fasteners when
tightening or loosening a nut or bolt
- Made from hardened chrome vanadium steel
- Comprise of a ring style spanner on one end and an open jaw spanner on
the other
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R30,00
Size: TX40
Length: 25mm
Torque limit (Nm): 65.1
<!-- ![]()
-->
A Torx classic insert bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
Size: TX35
Length: 25mm
Torque limit (Nm): 50
<!-- ![]()
-->
A Torx classic insert bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
Size: TX30
Length: 25mm
Torque limit (Nm): 37.4
<!-- ![]()
-->
A Torx classic insert bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
Size: TX25
Length: 25mm
Torque limit (Nm): 19
<!-- ![]()
-->
A Torx classic insert bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
Size: TX15
Length: 25mm
Torque limit (Nm): 7.7
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
Size: TX10
Length: 25mm
Torque limit (Nm): 4.5
<!-- ![]()
-->
A Torx classic insert bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R30,00
AirCraft PU Hose Fitting Y Joint 8mm x 1/8" M BSP (SPX08-01)
At a Glance: Y-branch fitting with two 8mm push-in outlets and a 1/8" Male BSP threaded connection.
The AirCraft SPX08-01 PU Hose Fitting Y Joint 8mm x 1/8" M BSP is a compact, dependable way to branch a single threaded air port into two 8mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 8mm ports and a reliable 1/8" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/8" Male BSP thread
Push your 8mm hoses in to lock, then screw into a 1/8" BSP port for a clean, compact branch connection—fast installs and tidy lines.
