Showing 3921–3936 of 4681 resultsSorted by latest
Fits 16mm (5/8 inch) chucks
16mm
Replacement key for our Tork Craft drill chucks. This chuck key will fit our range of
16mm chucks.
Always buy our Tork Craft approved chuck keys for chucks sold by Tork Craft
Shank:
T-shank
Distance between teeth: 4mm
Total length: 100mm
Teeth Per Inch: 6TPI
Packaging: Pack of 2
The jigsaw blades are used to cut:
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
Daimeter: Ø13.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
StandardNotice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
Drill diameter: Ø2.8mm
Packaging: Carded 2
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
The drill bit is made from HSS (hi-speed steel) and is precision fully ground
at 135° with a split point. The drill bit can be used to drill materials such
as iron, steel, non-ferrous metals and plastics.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will cut most materials.
Industrial HSS 135° angle point drill bits are designed to cut metal. The
split point adds 2 extra cutting edges with the adantage of reducing the amount
of pressure required to perform the cut.
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
At a Glance; Side-branch push-in tee for 4 mm pneumatic tubing
The AirCraft SG APDJ04 Insert T-Joint Side PU 4mm is made for neat, space-saving branching in small pneumatic systems. This side tee fitting lets you run a 4 mm tube line through while taking a clean side outlet for an extra tool, valve, gauge, or accessory. It’s a go-to connector for compact air layouts—airbrush stations, control panels, benches, and machinery—where fast push-in installation keeps everything tidy and easy to maintain.
The side-branch tee design helps keep your tubing runs straight and organised while adding a take-off point exactly where you need it. Push-in collets grip the tube securely and release quickly for servicing or rerouting.
At a Glance; 4 mm push-in tee connector for fast air line branching
The AirCraft SG APBJ04 Insert T-Joint PU 4mm is a tidy, time-saving way to split one pneumatic line into two. Designed for 4 mm tubing (commonly PU/nylon air line), this push-in tee fitting makes clean installs easy—push the tube in, route your branch, and you’re back in action with a secure connection that’s ideal for airbrush stations, small regulators, manifolds, and compact workshop air setups.
Built for everyday workshop use, this insert-style T-joint helps you create neat branches without complicated clamps or fiddly hose tails. The push-in collet design allows quick assembly and simple tube release when you need to adjust or service your line.
Robertson
Tip #:
3
Hex shank: 6.35mm (1/4′)
Length: 50mm
Packaging: Carded 1
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the Snap-it! quick change connectors:
25mm (Carded 2):
#0 – 25mm –
T SQ0025C
#1 – 25mm –
T SQ0125C
#2 – 25mm –
T SQ0225C
#3 – 25mm –
T SQ0325C
50mm (carded 1):
#0 – 50mm –
T SQ0050C
#1 – 50mm –
T SQ0150C
#2 – 50mm –
T SQ0250C
#3 – 50mm –
T SQ0350C
150mm (carded 1)
#1 – 150mm –
T SQ01150C
#2 – 150mm –
T SQ02150C
#3 – 150mm –
T SQ03150C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Robertson
Tip #:
0
Hex shank: 6.35mm (1/4′)
Length: 50mm
Packaging: Carded 1
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the Snap-it! quick change connectors:
25mm:
#0 – 25mm –
T SQ0025B
#1 – 25mm –
T SQ0125B
#2 – 25mm –
T SQ0225B
#3 – 25mm –
T SQ0325B
50mm:
#0 – 50mm –
T SQ0050B
#1 – 50mm –
T SQ0150B
#2 – 50mm –
T SQ0250B
#3 – 50mm –
T SQ0350B
150mm:
#1 – 150mm –
T SQ01150B
#2 – 150mm –
T SQ02150B
#3 – 150mm –
T SQ03150B
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
At a Glance: Push-in 10mm tube x 1/4" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC10-G02 straight stud fitting is a clean, time-saving way to connect 10mm PU tubing to a standard 1/4" BSP threaded port—now with the extra confidence of an O-ring seal.
Push the tube into the quick-connect collar for a strong grip, then screw the male thread into your regulator, manifold, filter unit, compressor outlet or pneumatic accessory.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
The built-in O-ring supports a dependable seal at the threaded port interface—great for improving leak resistance and maintaining stable airflow.
Hole saw diameter:
ø41mm
Use mandrel:
TC917012
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
At a Glance: 8mm push-in tube connection to 3/8" Male BSP thread in a space-saving 90° elbow.
When your air line needs to turn a corner without drama, this fitting is the clean solution. The AirCraft Elbow 8mm-3/8" M BSP PU Hose Fitting connects 8mm pneumatic tubing to a 3/8" BSP female port using a fast push-in connection, giving you a neat 90° elbow right at the port. It’s ideal for compressors, FRLs, regulators, manifolds and pneumatic tools where space is limited and you want tidy routing with reduced tube strain and kinking.
Built for quick installs, neat pneumatic plumbing and easy maintenance—perfect for busy workshop and industrial compressed-air systems.
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P80
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Unplug the power tool before attaching the sheet.For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P60
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Unplug the power tool before attaching the sheet.For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø180mm
GRIT: P16
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Unplug the power tool before attaching the sheet.For Ø180mm angle grinders, use backing pad
SP11232
Always make use of the necessary safety equipment when using machinery
or powertools!
Hole saw diameter:
ø38mm
Use mandrel:
TC917012
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
At a Glance: Push-in 4-way cross connector for 8 mm pneumatic tubing
Build a cleaner, more organised compressed-air layout with the AirCraft SG APZ08 PU Hose Fitting 4-Way Connector (8mm). This compact push-to-connect cross fitting lets you split, join or re-route airflow across four 8 mm tube runs, perfect for workshop air distribution, pneumatic circuits, spray areas and general air-line management. Push the tubing in for a secure connection, and use the release collar when it’s time to adjust or service your setup.
The SG APZ08 is a space-saving way to bring four pneumatic lines together without extra adaptors or bulky blocks. It helps reduce clutter, keeps tube runs tidy, and makes future changes quick and painless.
Tork Craft Mini Flap Wheel 29.5 X 5 X3.2Mm Shank 120G
1 × R29,00 Tork Craft Fibre Disc 180Mm 60 Grit Bulk
1 × R28,00 Subtotal: R57,00