Showing 4385–4400 of 4680 resultsSorted by latest
-
R11,00
Fibre sanding discs to be used with an angle grinder.
SIZE: Ø115mm
GRIT: P100
Application
The Tork Craft fibre discs have a heavy duty fibre backing for durability,
strength and tear resistance. The abrasives are made of aluminium oxide and is a
great choice for wood, metal and
masonry.
The fibre discs can be used to strip paint, finish welds on steel and shape wood.
Easy to use:
- Unplug the power tool before attaching the sheet.
- Align sanding disc on clean backup pad & press in place.
- Tighten the flange nut.
- Sand with light pressure.
For Ø115mm angle grinders, use backing pad
SP11011 or SP11211
Always make use of the necessary safety equipment when using machinery
or powertools!
-
R11,00
AirCraft Muffler Brass Flat 1/8" BSP Male (SG V-6)
At a Glance: Flat-profile brass exhaust muffler with 1/8" BSP Male (M) thread for quieter pneumatics
Small valves can still make a big noise. The AirCraft SG V-6 Muffler Brass Flat is a compact screw-in exhaust silencer for 1/8" BSP male ports, designed to diffuse exhausting air and reduce the sharp “hiss†from solenoid valves, compact manifolds and air control components. With a durable brass body and a low-profile flat design, it’s a tidy, long-lasting way to improve comfort and professionalism in your compressed air setup.
Standout feauture or series/quality/range: Flat brass durability for tight-space exhaust points
Brass offers excellent durability and corrosion resistance, while the flat profile helps keep valve blocks compact and interference-free—ideal when space is limited.
-
R11,00
Size: TX9
Length: 25mm
Torque limit (Nm): 3.4
A Torx Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove Torx-head
screws. It’s crafted from high-quality materials and features a unique design that enhances its durability and
performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R11,00
Size: TX8
Length: 25mm
Torque limit (Nm): 2.6
A Torx Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove Torx-head
screws. It’s crafted from high-quality materials and features a unique design that enhances its durability and
performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R11,00
Size: TX6
Length: 25mm
Torque limit (Nm): 0.9
A Torx Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove Torx-head
screws. It’s crafted from high-quality materials and features a unique design that enhances its durability and
performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R11,00
Size: TX5
Length: 25mm
Torque limit (Nm): 0.5
A Torx Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove Torx-head
screws. It’s crafted from high-quality materials and features a unique design that enhances its durability and
performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R11,00
Size: TX4
Length: 25mm
Torque limit (Nm): 0.37
A Torx Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove Torx-head
screws. It’s crafted from high-quality materials and features a unique design that enhances its durability and
performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R11,00
Size: 5.0mm
Short side: 26mm
Long side: 115mm
An L-wrench hex key, also known as an Allen key, is a simple yet essential hand tool used to tighten or
loosen bolts and screws with a hexagonal socket head. It’s named for its characteristic ‘L’ shape, which provides
two gripping points for better leverage and control.
Application:
- Used to drive bolts and screws with internal hexagonal (six-sided) sockets and grub screws.
- Manufacturing
- Electronics
- Construction
- DIY
-
R10,00
Torx Key T15
A Torx L-shaped key is a hand tool designed to drive fasteners with a six-point, star-shaped recess known as a Torx head. It is made from hardened
steel and bent into an “L†shape, providing a long arm for torque and a short arm for working in confined spaces. The Torx profile reduces
cam-out, allowing higher tightening torque compared to traditional hex keys. These tools are commonly used in automotive, electronics, furniture,
and machinery assembly where Torx screws are specified.
Features
- High torque transfer thanks to the star-shaped Torx profile.
- Reduced cam-out compared to Phillips or hex designs.
- Made from hardened steel for long service life.
- L-shape provides both leverage and access in tight spaces.
- Precision-machined tips for a secure fit in fasteners.
- Minimises rounding and damage to screw heads.
- Suitable for automotive, electronics, furniture, and machinery applications.
-
R10,00
Length: 300mm
Teeth per inch (TPI): 32
The blade fits in a hand-held hacksaw. The pins on either end are tensioned in the hacksaw before use. The blades
can be used to cut metals or plastics.
The blade can be mounted with the teeth facing towards or away from the handle, resulting in cutting action on
either the push or pull stroke.
Range:
The range of blades are available from 14 to 32 teeth per inch (TPI). The blade corresponds to the thickness of the
material being cut. There needs to be at least 3 teeth in the material at any time for the best result
Bi-metal vs. carbon steel hacksaw blades:
Carbon steel hacksaw blades are one of the very first hacksaw blades available. It is more flexible, but wears down
faster than bi-metal blades.
Application:
- 14 TPI – Non-ferrous metals plastics (8 – 12mmm thick)
- 18 TPI – Non-ferrous and plastics (5 – 10mm thick)
- 24 TPI – Non-ferrous metals and plastics (4 – 12mm thick)
- 32 TPI – Non-ferrous metals tubing and plastics(1 – 3mm thick)
- Ideal for construction and DIY.
TIP:
Cutting in the pull stroke increases the blade tension and will result in greater control of the cut and extends the life of the blade.
-
R10,00
Length: 300mm
Teeth per inch (TPI): 18
The blade fits in a hand-held hacksaw. The pins on either end are tensioned in the hacksaw before use. The blades
can be used to cut metals or plastics.
The blade can be mounted with the teeth facing towards or away from the handle, resulting in cutting action on
either the push or pull stroke.
Range:
The range of blades are available from 14 to 32 teeth per inch (TPI). The blade corresponds to the thickness of the
material being cut. There needs to be at least 3 teeth in the material at any time for the best result
Bi-metal vs. carbon steel hacksaw blades:
Carbon steel hacksaw blades are one of the very first hacksaw blades available. It is more flexible, but wears down
faster than bi-metal blades.
Application:
- 14 TPI – Non-ferrous metals plastics (8 – 12mmm thick)
- 18 TPI – Non-ferrous and plastics (5 – 10mm thick)
- 24 TPI – Non-ferrous metals and plastics (4 – 12mm thick)
- 32 TPI – Non-ferrous metals tubing and plastics(1 – 3mm thick)
- Ideal for construction and DIY.
TIP:
Cutting in the pull stroke increases the blade tension and will result in greater control of the cut and extends the life of the blade.
-
R10,00
Length: 300mm
Teeth per inch (TPI): 14
The blade fits in a hand-held hacksaw. The pins on either end are tensioned in the hacksaw before use. The blades
can be used to cut metals or plastics.
The blade can be mounted with the teeth facing towards or away from the handle, resulting in cutting action on
either the push or pull stroke.
Range:
The range of blades are available from 14 to 32 teeth per inch (TPI). The blade corresponds to the thickness of the
material being cut. There needs to be at least 3 teeth in the material at any time for the best result
Bi-metal vs. carbon steel hacksaw blades:
Carbon steel hacksaw blades are one of the very first hacksaw blades available. It is more flexible, but wears down
faster than bi-metal blades.
Application:
- 14 TPI – Non-ferrous metals plastics (8 – 12mmm thick)
- 18 TPI – Non-ferrous and plastics (5 – 10mm thick)
- 24 TPI – Non-ferrous metals and plastics (4 – 12mm thick)
- 32 TPI – Non-ferrous metals tubing and plastics(1 – 3mm thick)
- Ideal for construction and DIY.
TIP:
Cutting in the pull stroke increases the blade tension and will result in greater control of the cut and extends the life of the blade.
-
R10,00
AirCraft Polyurethane Hose 6mm O/d Per Metre Transparent (PU0640T)
At a Glance: Transparent polyurethane pneumatic hose with 6mm outside diameter, supplied per metre (from a 200m roll).
The AirCraft PU0640T polyurethane hose is a flexible, clean-looking air line option for pneumatic systems where you want both neat routing and easy visual checks.
Its transparent finish makes it simpler to inspect hose condition and keep installations looking organised inside panels, machinery frames and workshop setups.
With a 6mm outside diameter and per-metre supply (cut from a 200m roll), it’s a practical choice for running compressed-air lines to tools, valves, regulators and manifolds without buying more hose than you need.
Transparent PU hose for organised pneumatic installations
Polyurethane hose is widely used for compressed air routing because it’s easy to handle and routes smoothly through tighter spaces. The clear finish adds a handy bonus—quick visual inspection and a clean, professional look for your pneumatic plumbing.
-
R10,00
Tork Craft Replacement Red Ink — 0.5 ml for Blotting Tape (Model ME07825-01)
The Tork Craft ME07825-01 is a 0.5 ml replacement red ink refill compatible with the Tork Craft blotting tape applicator (ME07825). Specially formulated to provide smooth, vivid markings on a range of construction and workshop surfaces, it ensures accuracy and clarity in every layout job.
-
R10,00
AirCraft PU Hose Fitting Elbow 4mm (SPV04)
At a Glance: 90° push-in elbow for 4mm PU hose—perfect for tight corners and neat pneumatic routing.
The AirCraft SPV04 PU Hose Fitting Elbow 4mm is the go-to connector when your air line needs a clean turn without kinking the hose. This compact 90° push-in fitting connects 4mm polyurethane (PU) hose quickly and securely, making it ideal for tidy pneumatic layouts, compact installations, and quick repairs. Whether you’re routing lines inside a machine, upgrading a workshop air setup, or replacing a worn connector, the SPV04 helps keep air flow smooth and your hose runs looking professional.
Standout feature: Compact 90° elbow with push-in convenience
Neatly redirects your 4mm PU line around corners while keeping installation fast—push the hose in, lock it, and keep moving.
-
R10,00
AirCraft Plastic Breather Silencer 1/4" BSP Male Orange (SG SU-8)
At a Glance: 1/4" BSP Male plastic breather silencer for quieter pneumatic exhaust
Bring the volume down on your air system with the AirCraft SG SU-8 Plastic Breather Silencer. This screw-in silencer threads into a 1/4" BSP male port to help diffuse exhausting air and soften discharge noise—while also acting as a simple barrier against dust and debris at breather/exhaust openings. It’s a practical, workshop-friendly add-on for pneumatic valves, solenoids, manifolds and air control equipment where cleaner, quieter operation makes a real difference.
Standout feauture or series/quality/range: Compact diffuser-style muffling for everyday pneumatics
The vented plastic body disperses exhaust airflow to help reduce the sharp “hiss†of discharge, making it ideal for common 1/4" BSP ports used across many pneumatic setups.
