Showing 465–480 of 4680 resultsSorted by latest

  • Tork Craft Wire Cup Brush N/Spark Twisted 100Mmxm14 Bulk

    Tork Craft Wire Cup Brush N/Spark Twisted 100Mmxm14 Bulk

    R1 377,50

    Tork Craft Wire Cup Brush N-Spark Twisted 100 mm x M14 Bulk

    At a Glance: 100 mm twisted wire cup brush with M14 thread for versatile metal cleaning and surface prep

    The Tork Craft TCW TWNS10014B N-Spark twisted wire cup brush offers reliable metal surface cleaning for rust, paint, scale and weld spatter removal. With a 100 mm diameter and sturdy twisted steel wire bristles, this brush handles medium-scale metalwork tasks with ease. Designed for use with angle grinders featuring M14 threads, it is ideal for fabrication shops, maintenance tasks, structural metal prep and general workshop cleaning jobs.

    Versatile twisted wire cup brush from the N-Spark series for general-purpose metal prep

    This brush belongs to Tork Craft’s N-Spark twisted wire range, engineered for durability and effective material removal without excessive sparking — offering safer use in workshop environments. Its mid-sized cup and twisted wire give balanced performance, making it well suited for a wide variety of metal cleaning and prep tasks in professional and DIY settings.

    Add to cartDone
  • Tork Craft Diamond Blade Brazed 350 X 25.4Mm For Asphalt Tar

    Tork Craft Diamond Blade Brazed 350 X 25.4Mm For Asphalt Tar

    R1 361,54

    Diamond blade



    TYPE:
    Brazed and segmented

    DIAMETER: ø350mm
    BORE: Ø25.4mm
    MAX RPM: 3280
    USE: Asphalt

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Battery Pack 20V 6.0Ah Li-Ion

    Tork Craft Battery Pack 20V 6.0Ah Li-Ion

    R1 355,79

    Battery pack 20V 6.0Ah Li-Ion

    The battery pack fits all 20V Tork Craft Power Tools, is lightweight Lithium-Ion, and has a 6.0 Ah electric charge.

    The battery pack is fitted with LED battery capacity indicator lights and also has vents for cooling.

    Recharge only with the Tork Craft TC20VABC-01 and TC20VABC-02 chargers.





    Add to cartDone
  • Tork Craft Rotary Burr Set 5 Pc Asstd 12Mm Dia Tungsten

    Tork Craft Rotary Burr Set 5 Pc Asstd 12Mm Dia Tungsten

    R1 353,28

    TorkCraft – Rotary Burr Set

    QTY: 5 Piece

    Size: 12 mm






    Application:

    The Tork Craft Rotary Burr Set, standard double cut Tungsten carbide cutters. For use on pneumatic die-grinders Á electric die-grinder, for cleaning welding seams, de-burring, grinding Á shaping. For cutting steel, stainless steel, cast iron, high alloy steels Á brass. Operating speed 65000RPM Max.

    • Standard double cut Tungsten Carbide cutters
    • For use on pneumatic die-grinders & electric die-grinder.
    • For cleaning welding seams, de-burring, grinding & shaping
    • For cutting steel, stainless steel, cast iron, high alloy steels &
      brass.
    • Operating speed 65000RPM Max.

    Includes

    • 1 x Cylindrical
    • 1 x Round point
    • 1 x Ball
    • 1 x Rounded
    • 1 x Conical

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Laser Distance Meter 0.2 - 40M Min/Max Incl. Aaa Batteries Contr

    Tork Craft Laser Distance Meter 0.2 – 40M Min/Max Incl. Aaa Batteries Contr

    R1 349,10

    TorkCraft –
    Laser Distance Meter



    Laser Distance Meter

    Product Overview

    The TCLDM00D8 TorkCraft Laser Distance meter is the perfect tool for easy continuous measurement, single distance measurement as well as area measurement,
    it has a max measuring range of 40 meters & an accuracy of +-2mm. Measuring
    units in meters, batteries included.

    Application:

    • Measuring
    • Operating Temperature: 0°C ~ 40°C
    • Storage Temperature: -10°C ~ 60°C
    • Contractor
    • Fabrication
    • Woodworking
    • DIY
    Add to cartDone
  • Tork Craft Socket 80Mm 1' Drive Crv Hex

    Tork Craft Socket 80Mm 1′ Drive Crv Hex

    R1 345,34

    Tork Craft Socket — 80 mm × 1″ Drive

    Socket Size: 80 mm — 1″ (25.4 mm) Drive

    The Tork Craft 80 mm socket, designed for 1″ drive tools, features a chrome-vanadium construction and 6-point hex configuration for optimal grip on large fasteners. Built for professional use, it fits heavy-duty applications in automotive, industrial and service environments where torque is high and reliability is essential.

    Add to cartDone
  • Tork Craft 70Mm 3/4' Drive 6Pt Impact Socket

    Tork Craft 70Mm 3/4′ Drive 6Pt Impact Socket

    R1 340,83

    TorkCraft – Drive 6PT Impact Socket

    Size: 70 mm
    Shank: 3/4 inch

    Application:

    The TorkCraft 6PT Impact sockets are designed to cope with the vibration
    caused by the impact of the hammer on the anvil, inside
    the impact wrench, as well as the greater levels of
    torque this can generate where an ordinary socket is
    likely shatter.

    • To be used wirth powered impact wrenches or drivers
    • The combination of an impact wrench and impact socket can deliver
      greater torque to the head of a fastner than can be achieved with a manual
      wrench
    • Sockets are hardened abd tempered
    • Hardened to 40 – 50 HRC on rockwell scale

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Deep Offset Combination Spanner 50Mm

    Tork Craft Deep Offset Combination Spanner 50Mm

    R1 335,70

    Tork Craft Deep-Offset Combination Spanner — 50 mm

    Packaging: Single tool (flag-type hanger)

    Engineered for big fasteners in tight, awkward spaces. The Tork Craft 50 mm deep-offset combination spanner pairs a quick-access open end with a ring end set on a deep offset for extra knuckle and obstruction clearance. Forged from chrome-vanadium steel and finished to resist corrosion, it’s a workshop-grade tool for mechanics, maintenance and industrial assembly.

    Add to cartDone
  • Tork Craft Deep Offset Combination Spanner 48Mm

    Tork Craft Deep Offset Combination Spanner 48Mm

    R1 335,70

    Tork Craft Deep-Offset Combination Spanner — 48 mm

    Packaging: Single tool (flag-type hanger)

    Engineered for big fasteners in tight, awkward spaces. The Tork Craft 48 mm deep-offset combination spanner pairs a quick-access open end with a ring end set on a deep offset for extra knuckle and obstruction clearance. Forged from chrome-vanadium steel and finished to resist corrosion, it’s a workshop-grade tool for mechanics, maintenance and industrial assembly.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 48 X 30Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 48 X 30Mm Weld Shank 19.05Mm

    R1 334,21

    Annular Cutters 30mm

    Annular Cutter: Ø 48
    mm

    ANNULAR HOLE CUTTER HSS 38 X 30MM BROACH SLUGGER BITOne
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular
    cutters convert a smaller area to chips, requiring less horsepower and thrust. This
    feature provides longer tool life and less chatter. The slug also offers a higher
    scrap value than loose chips and shavings.

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Drill Press Vice 100Mm

    Tork Craft Drill Press Vice 100Mm

    R1 330,00

    Tork Craft Drill Press Vice 100mm

    At a Glance: 100 mm jaw width low-profile drill press vice for stable, accurate drilling

    The Tork Craft Drill Press Vice 100mm (Model TCV13100) is a compact, low-profile vice designed to hold your workpiece securely on a drill press table or pillar drill. With 100 mm wide jaws and a sturdy cast-iron body, it keeps metal, plastic or timber stock firmly in place so you can drill straight, repeatable holes with confidence. Slotted base holes make it easy to align and bolt the vice to most drill press tables, while the precision-machined jaws and screw provide smooth clamping action and a solid grip.

    Rigid 100mm drill press vice for precise, repeatable drilling

    This drill press vice is built to handle everyday workshop and DIY drilling tasks – from drilling flat bar and angle iron to small blocks, brackets and timber components. The robust cast-iron construction resists flex under load, helping the drill bit stay on line, while the compact footprint suits smaller drill press tables and benchtop machines. It is a simple, dependable workholding solution that quickly becomes a permanent resident on your drill press table.

    Add to cartDone
  • Tork Craft Drill Nut Riveter M3 M4 M5 M6 1/4' Hex Shank Fits Any Drill

    Tork Craft Drill Nut Riveter M3 M4 M5 M6 1/4′ Hex Shank Fits Any Drill

    R1 328,10

    Tork Craft Drill Nut Riveter M3/M4/M5/M6 ¼″ Hex Shank

    Versatile rivet nut installer: Handles M3, M4, M5 & M6 rivet nuts with a ¼″ hex shank design

    Experience efficient and reliable rivet nut installation with the Tork Craft Drill Nut Riveter. Built to set threaded inserts (rivnut® style) in materials such as aluminium, steel and stainless steel, this tool makes job-site or workshop fastening quick and repeatable.

    Featuring a ¼″ (6.35 mm) hex shank, the TCRIV002 fits standard 3-jaw chucks and most cordless and corded drills—no dedicated gun required. Change the included nose pieces and mandrels for each size (M3, M4, M5, M6) and you’re ready for rapid installation in a wide range of applications from enclosures and HVAC brackets to automotive panels and structural metalwork.

    What is a drill nut riveter?

    A drill nut riveter is an adapter-type tool that converts a regular drill into a rivet nut setter by incorporating the correct nose piece and mandrel for the insert size, then pulling the insert tight as you actuate the drill in low speed/reverse mode.

    Add to cartDone
  • Tork Craft Wire Cup Brush Non Sparking Crimped Wire 100Mmxm14 Bulk

    Tork Craft Wire Cup Brush Non Sparking Crimped Wire 100Mmxm14 Bulk

    R1 326,63

    WIRE CUP BRUSH NON SPARKING CRIMPED WIRE 100MMXM14 BULK

    Add to cartDone
  • Tork Craft Dia. Blade 300X12X25.4Mm Gen. Purp. Laser Welded Segmented

    Tork Craft Dia. Blade 300X12X25.4Mm Gen. Purp. Laser Welded Segmented

    R1 326,63

    Diamond blade



    TYPE:
    Laser weld and industrial segmented.

    DIAMETER: ø300mm
    BORE: Ø25.4mm
    MAX RPM: 5,000
    USE: Marble, granite, concrete, masonry

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Diamond Core Bit 65X170Mm Concrete M22

    Tork Craft Diamond Core Bit 65X170Mm Concrete M22

    R1 305,59

    Dry Cut Diamond Core Drill

    For plumbers, electricians or general contractors needing to
    drill a hole quickly and cleanly in concrete for an installation.


    Core diameter:     Ø65mm
    Depth: 170mm
    Adaptor thread: M22
    Main use: Concrete

    Application:

    The dry cut diamond core drill is designed to be used without water to drill
    into:

    • Concrete
    • Concrete pipes
    • Brickwork
    • Roof tiles
    • Slate
    • Stone
    • Paving
    • Tarmac

    It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.

     

    INFORMATION:
    Have a look at the different adaptors under the EXTRA INFO tab and the complete
    range under the ACCESSORIES tab.

    IMPORTANT:
    Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
    pipes or electrical conduit.

    Add to cartDone
  • Tork Craft Diamond Core Bit 65 X 170Mm Universal Purpose M22

    Tork Craft Diamond Core Bit 65 X 170Mm Universal Purpose M22

    R1 305,59

    Dry Cut Diamond Core Drill

    For plumbers, electricians or general contractors needing to
    drill a hole quickly and cleanly in brickwork for an installation.


    Core diameter:     Ø65mm
    Depth: 170mm
    Adaptor thread: M22
    Main use: Brickwork

    Application:

    The dry cut diamond core drill is designed to be used without water to drill
    into:

    • Brickwork
    • Roof tiles
    • Slate
    • Stone
    • Paving

    It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.

    INFORMATION:
    Have a look at the different adaptors under the EXTRA INFO tab and the complete
    range under the ACCESSORIES tab.

    IMPORTANT:
    Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
    pipes or electrical conduit.

    Add to cartDone

    • Powered by