“Tork Craft Die Hss M3 – M12 And Die Holder Set 8Pce 3-12Mm Carded” has been added to your cart.
View cart
Showing 593–608 of 4680 resultsSorted by latest
-
R882,49
For use with bench grinders to grind steel
DIAMETER: ø250mm
WIDTH: 40mm
BORE: Ø50.8mm
GRIT: 36
ABRASIVE: Silicon Carbide
MAX RPM: 2675
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iron, tungsten, forgings, etc.)
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R881,02
F1.BT71 3/8 inch Sockets and Accessories in a tray set (26 pieces)
Insert for tool our tool cabinets. 1/3 drawer size,
26 pieces. The set consists of
3/8 drive sockets. Covering a range of HEX normal and deep sockets, as well as
various hex/allen bits. Made of high quality chrome vanadium steel.
Manufactured in accordandance to DIN 3123 and DIN 3124 standards
See the Specifications TAB for details.
-
R879,65
Tork Craft Impact Socket — 52 mm, ¾″ Drive, 6-Point Deep (Model TCIM31052)
The Tork Craft TCIM31052 is a professional-grade deep impact socket sized at 52 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.
-
R879,65
Size: 57 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R877,39
Product Overview
The Tap wrench is a hand tool used to turn taps or other small tools, such as
hand reamers and screw extractors. The smallest size which accommodates the tool
head is recommended because it reduces the risk of breakage from excessive force
Taps are used for cutting internal threads, TorkCraft taps are rust & tarnish
resistant, cuts cleaner more accurate threads, has four flutes for extra
chip clearance
Dies are used for cutting external threads, versatile, hexagon shape for use
with die stock or an ordinary adjustable wrench
Included
- 16 x Taps (M3 – M12)
- 16 x Dies (M3 – M12)
- 1 x BSP Tap
- 1 x BSP Die
- 1 x T-Tap Wrench
- 1 x Tap Wrench (M3 – M12)
- 1 x Die Wrench (25 x 9)
- 1 x Screwdriver
- 1 x Screw Pitch Gauge
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R872,49
Tork Craft Impact Socket — 51 mm, ¾″ Drive, 6-Point Deep (Model TCIM31051)
The Tork Craft TCIM31051 is a professional-grade deep impact socket sized at 51 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.
-
R871,28
Tork Craft Annular Hole Cutter — TCT 32 × 35 mm, 19.05 mm (3/4′) Weldon
Size: 32 mm x 35 mm [3/4′ Weldon Shank]
The 32 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.
-
R865,93
Tork Craft Socket — 70 mm × 1″ Drive
Socket Size: 70 mm — 1″ (25.4 mm) Drive
The Tork Craft 70 mm socket, designed for 1″ drive tools, features a chrome-vanadium construction and 6-point hex configuration for optimal grip on large fasteners. Built for professional use, it fits heavy-duty applications in automotive, industrial and service environments where torque is high and reliability is essential.
-
R864,36
Hammer Chipper Replacement Blade – Scutch Comb (Double Sided, 100pc Pack)
Product Type: Chisel Blade Replacement
Material: Hardened Carbon Steel
Design: Double-Sided / Reversible
Quantity: 100 Pieces per Pack
Product Description:
This professional-grade scutch comb blade pack includes 100 reversible replacement blades designed for tough construction work. Made from hardened carbon steel, each blade features sharp notched teeth on both edges and is ideal for chipping, dressing, or cleaning brick and stone surfaces.
-
R862,69
Tork Craft Keyless Drill Chuck — 13 mm × 1/2″ × 20 UNF (Self-Tightening)
Upgrade your drill with quick, tool-free bit changes and a secure grip. This 13 mm keyless, self-tightening chuck fits spindles with a 1/2″ × 20 UNF thread and provides smooth tightening action with strong clamping force for general drilling in wood, plastics and light metals.
Ultra replacement 13mm (1/2′) keyless
drill chuck, 20 UNF thread. Replacement drill chuck for use in most small
electric and cordless drills. Self tightening chuck type.
- Fits most 13mm drills
- 1/2in x 20 UNF thread
- Opening capacity: 13mm
- Durable all metal construction
Installation Info
Most chucks will have a reverse threaded
screw locking them in place that will have to be removed before unscrewing and
replacing the chuck.
Pro Tip
- To seat the chuck firmly on the spindle, run the drill in reverse at low speed for a second after hand-tightening.
- If you notice slip on tough materials, retighten at mid-stroke: stop, add a quarter-turn by hand, then continue drilling.
-
R860,29
Drill diameter: Ø11.5mm
Packaging: Packet of 5
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is precision fully ground
at 135° with a split point. The drill bit can be used to drill materials such
as iron, steel, non-ferrous metals and plastics.
Advantages:
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will cut most materials.
Industrial HSS 135° angle point drill bits are designed to cut metal. The
split point adds 2 extra cutting edges with the adantage of reducing the amount
of pressure required to perform the cut.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
-
R858,63
Tork Craft Contractor Circular Saw Blade 350 mm × 100T × 30/25.4 TCT (Aluminium & Boards)
Highlights: 350 mm diameter, 100-tooth TCG (triple-chip grind) negative-angle profile TCT contractor blade with spacers for 30 mm, 25.4 mm (1″), arbors
The Tork Craft TCP350100AL is part of our contractor-quality blade range, designed for high-precision finish cutting in aluminium, composite panels, laminates and board materials.
With its very high tooth count and TCG negative grind profile, this blade offers a superb surface finish, minimal chip-out and excellent performance even on difficult or brittle materials.
Included reduction spacers for 25.4 mm (1″), arbors make the blade compatible with a wide variety of saw machines.
The 350 mm size gives the capacity for larger sheet cutting and board processing, while maintaining the professional finish demanded by cabinetry, shop-fitting and aluminium fabrication.
What is the Tork Craft TCP350100AL contractor blade?
The Tork Craft TCP350100AL is a 350 mm diameter circular saw blade with 100 tungsten carbide tipped teeth, using a TCG negative grind (TCG-Neg) geometry designed for cutting aluminium and board materials with ultra-clean edge quality.
It uses a standard 30 mm bore but is supplied with spacer rings to fit 25.4 mm (1″), arbor sizes, making it versatile across many saw setups.
As part of the contractor-quality range, it is built for both durability and precision in workshop or on-site environments.
-
R858,38
Tork Craft Impact Socket — 54 mm, 1″ Drive, 6-Point (Cat No. TCIM50054)
Size: 54 mm socket size — Drive: 1″ (25.4 mm) drive
The Tork Craft 54 mm impact socket features a robust 6-point internal geometry and heavy-duty construction, designed to handle high-torque impact wrenches in automotive, industrial repair and maintenance environments. Its large 1″ drive makes it suitable for demanding applications where greater leverage and durability are required.
-
R850,44
Tork Craft TCT Saw Blade 235 × 60T 30/25/16mm ATB Positive
Heading: 235 mm diameter, 60 carbide-tipped teeth, multi-bore 30/25/16 mm for board & timber work
The Tork Craft TCPR23560 is a premium-grade 235 mm diameter tungsten-carbide tipped (TCT) circular saw blade featuring a 60-tooth ATB (Alternate Top Bevel) positive hook geometry—designed for applications where edge finish, smoothness and durability are required across wood, board goods and laminate panels.
With a multi-bore fit of 30 mm nominal and reducing rings for 25 mm and 16 mm arbors, this blade is well suited to larger portable saws and table saws. The higher tooth count gives better surface finish than coarse ripping blades, while maintaining good feed-rates for job-site or workshop use.
Industrial quality range
The “Industrial†tag indicates this blade is from Tork Craft’s higher-duty line, built for consistent use in demanding environments—professionals, contractors and serious workshop applications where reliability and performance matter.
-
R838,84
Die: M3, M4, M5, M6, M8, M10, M12
This set is typically used for metalworking and is made from high-speed steel (HSS). This particular set would cover
sizes from 3mm to 12mm, providing a versatile selection for various applications.
The HSS material ensures durability and sharpness, making it suitable for drilling into different metals.
A die holder, designed to securely hold the drill bits, is also included. This holder often has a chuck mechanism
that allows for quick and easy bit changes, improving efficiency and convenience during work.
Application:
- For cutting external threads
- For thread repair and cleaning.
- Construction
- Manufacturing
- DIY
-
R837,90
Size: 53 x 20 x 4 mm
QTY: 1000 Piece
Application:
The Tork Craft Wood Joining Biscuits, beech wood joining biscuits. For
joints such as edge-to-edge, mitre, T-joints and corner joints. Adds
strength to wooden joints and also assists with aligning joint.
- Beech wood joining biscuits
- For joints such as edge-edge, mitre, T-joints and corner joints
- Adds strength to wooden joints
- Assists with aligning joint
Benefits:
- The grain direction on the biscuits are diagonal to add strength to the joinery.
- The biscuit provides a quick means of getting a perfectly flush joint, while at the same time reinforcing the joint.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
