Showing 785–800 of 4680 resultsSorted by latest
Heavy-duty 20.5 mm high-speed steel (HSS) twist drill bit with a Morse Taper 2 (MT2) shank. Designed for precision and power, it mounts directly into MT2 taper sockets and is suited for large-diameter machining in metals, alloy, plastics, and fabrication environments.
The Tork Craft NR3240C is a high-speed steel (HSS) hex-shank external die, designed specifically for 24 mm hexagonal rods or bolts. Supplied on a hanging card for easy display, this die offers precision thread cutting for maintenance, fabrication and heavy-duty metalworking tasks.
At a Glance: Adaptor to convert 31.75mm tooling interface down to 19.05mm for compatible annular cutter setups.
The Tork Craft TCAC0009 annular cutter adaptor is the practical fix when your machine and your tooling don’t agree on shank size. Designed to convert from 31.75mm down to 19.05mm, this adaptor helps you match compatible annular cutter accessories and cutting setups to the toolholder you’ve got—without compromising on fit and alignment. Ideal for steel fabrication and magnetic drill environments, it’s a workshop-ready accessory that helps expand compatibility, improve versatility and keep your drilling setup properly seated for accurate cutting.
Converts a 31.75mm interface to 19.05mm to help fit compatible annular cutter tooling or accessories to the correct machine or holder size.
Rigid aluminium
case with foam.
SIZE: 210mm x 170mm x 65mm
MATERIAL: Aluminium
FOAM: Yes
The case is rigid and compact. Ideal for the storage of instruments and
sensitive equipment.
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø20mm
MATERIAL: Hardened steel with a shear angle design for smooth
and easy cutting
There is a variety of different plug cutters in the range, depending on the diameter
hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole
is drilled to correspond to the correct plug cutter.
TIP:
For best results, use a drill press to cut all the plugs to the required depth.
A band saw can then be used to remove the plugs from the offcut.
Packaging: Bulk bag (500 pieces)
Keep production moving with this contractor-size bulk bag of 12 mm eyelets. Sized specifically for the TC4304 grommet setting tool kit, these formed metal eyelets deliver clean reinforcement of holes in fabric, canvas, leather, tarpaulin and plastic sheeting—perfect for signage makers, event contractors and workshop use.
Size: 25.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
Cup Diameter: Ø115mm
Bore: 22.23mm
MAX RPM: 13 300
Type: Laser Welded, Turbo
The cup grinding wheel is used with an angle grinder to clean granite, masonry, concrete and stone surfaces.
A diamond blade grinds, rather than cuts through material. The blades typically have segments which contain diamond
crystals embedded throughout the segment for grinding through very hard materials.
Application:
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular
cutters convert a smaller area to chips, requiring less horsepower and thrust. This
feature provides longer tool life and less chatter. The slug also offers a higher
scrap value than loose chips and shavings.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular
cutters convert a smaller area to chips, requiring less horsepower and thrust. This
feature provides longer tool life and less chatter. The slug also offers a higher
scrap value than loose chips and shavings.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
TYPE:
Hot press and segmented.
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. The diamonds are industrial
diamonds of different sizes and qualities depending on the material to be cut as
well a the blade type.
The individual diamond crystals exposed on the leading edge and the sides of
the segment or rim carry out the cutting. The operator pushes the rotating blade
into the material and the surface diamonds thus exposed mill a groove in the
material. When the blade mills the material, the latter exerts wear on the
blade. During cutting the exposed diamonds may crack
or break. The material simultaneously starts to abrade the metal matrix, which
releases more diamonds.
The more abrasive the material, the more rapid
the tendency to wear down the matrix. Blades for cutting hard, denseless
abrasive materials (such as tile, bricks, stone or cured concrete), require
a softer metal matrix.
This will wear down faster, replacing the worn diamonds
fairly quickly so that the blade continues to cut.
Blades for cutting soft,
abrasive materials (such as green concrete and asphalt), must have a hard,
abrasion-resistant metal matrix in order to retain the diamonds for a longer
time.
Water will prevent the blade from overheating:
It will greatly reduce the amount of harmful dust created by cutting. Remove the
slurry from the cut, and extend the life of the blade.
Application:A pipe clamp is a must have clamp for any woodworker. It is extremely strong
and easy to use compared to other sash clamps. This fixture will convert any Ø25mm
OD steel pipe into a sash clamp.
Standard sash clamps have a length restriction. The longest sash clamp
available is 2,5m. Pipe can be bought in various lengths, where 6m is the
longest. Thus
being able to clamp large projects with ease.
T-Handle
The Allen key is ergonomically T-shaped for added grip and comfort when turning.
The handle also resists rotational distortion.
The Allen key features a ball end tip that guides the tip easier into a bolt. It
also allows the Allen key to swivel when turned. This is useful when fastening
bolts in awkward angles where standard Allen keys won’t reach.
NOTE:
Allen keys are also known as hex keys.
Packaging: Blister/Box (208 accessories)
This 208-piece accessory set from Tork Craft includes a comprehensive assortment of general-purpose bits, blades, discs, buffs and attachments suited for mini tools and rotary tool systems. Designed for trades, hobby workshops or maintenance crews seeking a wide range of accessories in a single pack.
Diameter: Ø230mm
Thread/Hook & Loop: 5/8 UNC
The double sided wool buff should be used with an automotive polisher.
Different compounds, polishes and waxes can be applied to both sides of the buff
and then flipped around when needed. This saves time without the need of
changing to another buff.
It is necessary to polish a vehicle body panel when:
TIP:
The buff is washable after use if the compound is soluble.
| ORDER NO. | DIAMETER | THREAD |
MM DS7 |
Ø180mm | M14 |
| MM DS7-2 | ø180mm | 5/8 UNC |
| MM DS9 | ø230mm | M14 |
| MM DS9-2 | ø230mm | 5/8 UNC |
| ORDER NO./td> | MALE THREAD | FEMALE THREAD |
| SPC00055 | 5/8 UNC | 5/8 UNC |
| SPC00053 | 5/8 UNC | M14 |
| SPC00054 | M14 | 5/8 UNC |
| SPC00052 | M14 | M14 |
Diameter: Ø230mm
Thread/Hook & Loop: M14
The double sided wool buff should be used with an automotive polisher.
Different compounds, polishes and waxes can be applied to both sides of the buff
and then flipped around when needed. This saves time without the need of
changing to another buff.
It is necessary to polish a vehicle body panel when:
TIP:
The buff is washable after use if the compound is soluble.
| ORDER NO. | DIAMETER | THREAD |
MM DS7 |
Ø180mm | M14 |
| MM DS7-2 | ø180mm | 5/8 UNC |
| MM DS9 | ø230mm | M14 |
| MM DS9-2 | ø230mm | 5/8 UNC |
| ORDER NO. | MALE THREAD | FEMALE THREAD |
| SPC00055 | 5/8 UNC | 5/8 UNC |
| SPC00053 | 5/8 UNC | M14 |
| SPC00054 | M14 | 5/8 UNC |
| SPC00052 | M14 | M14 |