Showing 801–816 of 4680 resultsSorted by latest

  • Aircraft Spray Gun Hvlp 1.4Mm Nozzle

    Aircraft Spray Gun Hvlp 1.4Mm Nozzle

    R538,02

    AirCraft Spray Gun Hvlp 1.4mm Nozzle

    At a Glance; HVLP gravity feed spray gun with 1.4mm nozzle/needle, 600ml cup, 3–4 bar working pressure

    The success behind an HVLP spray gun is the low amount of overspray—meaning more paint on the job and less paint floating around your workshop.
    The AirCraft SG-AS1001A achieves this through improved atomisation using lower air pressure with a higher volume of airflow (HVLP: High Volume Low Pressure).
    With a 1.4mm nozzle/needle set and a gravity feed 600ml cup, it’s a reliable go-to for clean, even coverage on panels, projects, and general spray finishing.

    HVLP efficiency with smooth control for consistent spray finishing

    Designed to stay comfortable and balanced while you work, the angled gravity cup and easy adjustment controls help you dial in fan pattern and fluid flow for a cleaner finish with less bounce-back.

    Add to cartDone
  • Tork Craft Drill Hss 20.0Mm 135Deg 1/Card Reduced Shank Industrial Bit

    Tork Craft Drill Hss 20.0Mm 135Deg 1/Card Reduced Shank Industrial Bit

    R536,50

    Tork Craft Drill Bit — HSS 20.0 mm Reduced Shank Industrial Bit (135° Split Point)

    Heavy-duty 20.0 mm industrial-grade high-speed steel (HSS) drill bit with a 135° split point for fast, self-centering starts and minimal walking. The reduced shank allows this large-diameter bit to be used in standard 13 mm chucks — ideal for thick metals, cast iron, aluminium, plastics and general fabrication use.

    Add to cartDone
  • Tork Craft Drill Hss 19.5Mm 135Deg 1/Card Reduced Shank Industrial Bit

    Tork Craft Drill Hss 19.5Mm 135Deg 1/Card Reduced Shank Industrial Bit

    R536,50

    Tork Craft Drill Bit — HSS 19.5 mm Reduced Shank Industrial Bit (135° Split Point)

    Professional 19.5 mm high-speed steel (HSS) drill bit featuring a 135° split point for precise, self-starting cuts with minimal walking. The reduced shank allows use in standard 13 mm chucks while still offering large-diameter drilling capability for metals, plastics, aluminium and general fabrication.

    Add to cartDone
  • Tork Craft H24 3/4' Drive Impact Bit Socket (100Mml)

    Tork Craft H24 3/4′ Drive Impact Bit Socket (100Mml)

    R532,14

    Tork Craft Impact Bit Socket — H24, 3/4″ Drive (100 mm)

    Packaging: Bulk (sold as each)

    A tough H24 hex impact bit socket with a 3/4″ square drive and extended 100 mm body for reach and control. Built for high-torque fastening on machinery, automotive hubs and industrial assemblies where an H24 internal hex is specified.

    Add to cartDone
  • Tork Craft Hex Shank Adaptor M16X13Mm For Diam Core 300Mm

    Tork Craft Hex Shank Adaptor M16X13Mm For Diam Core 300Mm

    R528,86

    Adaptor – Hex shank


    Adaptor length:     300mm
    Thread: M16
    Connection type: Hex

    Application:

    This is a Hex adaptor to connect the Dry Cut Diamond Core Drill to your
    portable drill.

    Make sure the threads are the same as the Dry Cut Diamond Core Drill – M22 or
    M16.

    Take note that there are 2 connection types:

    • Hex
    • SDS Plus

     

    List of different adaptors:

    1. Hex shank adaptors for the Dry Cut Diamond Core Drill range:

    • Hex shank 70mm, M16 thread –

      TC18HEX1
    • Hex shank 200mm, M16 thread –
      TC18HEX2
    • Hex shank 300mm, M16 thread –
      TC18HEX3
    • Drift key for removing the pilot drill –
      TC18KEY
    • Pilot drill bit (not included with adaptors)-

      TC18PILOT

    2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range:

    NOTE:
    The pilot drill bit is not included with the adaptors and it is available
    separately –

    TC18PILOT

    INFORMATION:
    Use the drift key
    TC18KEY to remove or replace the
    pilot drill bit from the adaptors.

     

    Add to cartDone
  • Tork Craft Drill Hss 7.0Mm 135Deg 10 Pack Industrial Bit

    Tork Craft Drill Hss 7.0Mm 135Deg 10 Pack Industrial Bit

    R528,71

    HSS industrial drill bit


    Drill diameter:     Ø7.0mm
    Packaging: Packet of 10
    Point: 135° split point
    Drill bit: HSS (Hi-speed steel)

    Application:

    The drill bit is made from HSS (hi-speed steel) and is precision fully ground
    at 135° with a split point. The drill bit can be used to drill materials such
    as iron, steel, non-ferrous metals and plastics.

    Advantages:

    Standard HSS 118° angle point drill bits are designed as an all purpose drill
    bit and it will cut most materials.

    Industrial HSS 135° angle point drill bits are designed to cut metal. The
    split point adds 2 extra cutting edges with the adantage of reducing the amount
    of pressure required to perform the cut.

    Sharpening:

    The drill bits are re-sharpenable several times. We recommend the following
    machines as it will sharpen 135° HSS  split point drill bits with ease:

    Add to cartDone
  • Tork Craft Mini Tool Set Cordless 3.7V Li-Ion Usb Rechargeable C/W Accesories

    Tork Craft Mini Tool Set Cordless 3.7V Li-Ion Usb Rechargeable C/W Accesories

    R526,11

    Tork Craft Mini Tool Set Cordless 3.7 V Li-ion USB Rechargeable with Accessories (TCMT006)

    Highlights: Cordless 3.7 V Li-ion powered, USB chargeable, includes multiple accessories

    The Tork Craft Mini Tool Set (model TCMT006) brings portable power and flexibility to your workshop, hobby bench or job-site. With a 3.7 V Li-ion battery and USB recharge capability you can take this tool almost anywhere without needing mains wiring.

    Included in the kit are various accessories such as sanding sleeves, grinding wheels, diamond points, an engraving point and collets — enabling you to grind, polish, clean or engrave materials like metal, plastic or wood with ease. The compact size and versatile attachments make it a go-to for detailed tasks, tight access locations or where a full-sized tool is overkill.

    Add to cartDone
  • Tork Craft Combination Spanner 42Mm

    Tork Craft Combination Spanner 42Mm

    R523,56

    COMBINATION SPANNER 42MM

    Add to cartDone
  • Tork Craft 32Mm 1' Drive 6Pt Deep Impact Socket

    Tork Craft 32Mm 1′ Drive 6Pt Deep Impact Socket

    R522,59

    Tork Craft Impact Socket — 32 mm, 1″ Drive, 6-Point Deep

    Size: 32 mm — Drive: 1″ (25.4 mm) drive

    The Tork Craft 32 mm deep impact socket features a robust 6-point profile and deep-reach design, built for use with high-torque impact wrenches in heavy-duty applications. Suitable for use in automotive, industrial maintenance and service environments where large fasteners and high torque are common.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 21 X 55Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 21 X 55Mm Weld Shank 19.05Mm

    R521,31

    Annular Cutters 55mm long

    Annular Cutter: Ø 21 mm

    55mm Annular Cutter (Broach Cutter)One
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular cutters convert a smaller area to chips, requiring less horsepower and
    thrust. This feature provides longer tool life and less chatter. The slug also offers
    a higher scrap value than loose chips and shavings.

    Refer to the picture shown below, explaining why annular cutters are more efficient
    and faster than twist drill bits.

    Differences explained

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft 20 Piece Imperial Tap & Die Set In Plastic Case

    Tork Craft 20 Piece Imperial Tap & Die Set In Plastic Case

    R521,31

    TorkCraft – 20 Piece Carbon Steel Tap and Die Set

    Product Overview

    The TorkCraft 20 Piece carbon steel tap and die set, 9 taps and 9 dies included
    between the sizes of 5/16′ – 1.2′, 1 Tap Wrench and 1 Die Wrench

    Included

    • 9 x Taps (5/16′ – 1.2′)
    • 9 x Dies (5/16′ – 1.2′)
    • 1 x Tap Wrench (M3 – M12)
    • 1 x Die Wrench (1′)

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    NOTE: Though we recommend Drill Sizes for the different tap sizes, it may not always be applicable

    Add to cartDone
  • Tork Craft Scotch Eye Auger Bit 25Mm X 400Mm Bulk

    Tork Craft Scotch Eye Auger Bit 25Mm X 400Mm Bulk

    R520,43

    Tork Craft Scotch Eye Auger Bit 25mm x 400mm – Bulk

    Highlights: 25mm diameter, 400mm length, Scotch eye loop handle for controlled manual drilling.

    When precision meets big-bore drilling needs, the Tork Craft Scotch Eye Auger Bit steps in. With a 25 mm diameter and extended 400 mm shaft, it’s ideal for drilling large holes through timber posts, beams, structural frames and outdoor utility installations where depth and size matter. The Scotch eye loop handle allows insertion of a rod or screwdriver for added torque and control, and the self-feeding threaded tip guides the bit through the timber with minimal wandering and less effort.

    Large-bore manual auger with Scotch eye leverage and extended reach for structural drilling

    Engineered for demanding timber drilling where large hole size and depth are essential.

    Add to cartDone
  • Aircraft Filter In Line 1/2' Water Trap

    Aircraft Filter In Line 1/2′ Water Trap

    R514,50
    In-line filter 1/2 BSP

    In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.

    Visible arrows are on the outer body of the casing that indicate the direction of installation to
    correspond with the direction of airflow.

    Drain: Manual

    A push-in fitting is located on the drain to allow fluid to drain to a
    central point via PU tubing (not included).

    Add to cartDone
  • Aircraft Press.Switch 3Ph.1 Way Brass Ferrule

    Aircraft Press.Switch 3Ph.1 Way Brass Ferrule

    R514,50
    Pressure switch – One way, three phase

    The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.

    Voltage: Three phase
    Unloader connection Brass ferrule
    Thread: 1/4 BSP
    Ports: One way
    Pressure rating: Max 12.5 Bar

    Air pressure is important:

    Compressors need quite a bit of power to generate compressed air and it is
    advised to keep the electrical cable to a minimum length. A 10m cable lead
    should have a core thickness of at least 2.5mm. If distance is important to
    supply compressed air, rather increase the length of hose instead of using an
    extension lead.

    An extension lead could shorten the life expectancy of the pressure switch.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 20 X 55Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 20 X 55Mm Weld Shank 19.05Mm

    R514,26

    Annular Cutters 55mm long

    Annular Cutter: Ø 20
    mm

    55mm Annular Cutter (Broach Cutter)One
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular cutters convert a smaller area to chips, requiring less horsepower and
    thrust. This feature provides longer tool life and less chatter. The slug also offers
    a higher scrap value than loose chips and shavings.

    Refer to the picture shown below, explaining why annular cutters are more efficient
    and faster than twist drill bits.

    Differences explained

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Wire Cup Brush N/Spark Twisted 80Mmxm14 Bulk

    Tork Craft Wire Cup Brush N/Spark Twisted 80Mmxm14 Bulk

    R511,36

    Tork Craft Wire Cup Brush N-Spark Twisted 80 mm x M14 Bulk

    At a Glance: 80 mm twisted wire cup brush with M14 thread for versatile metal cleaning and surface prep

    The Tork Craft TCW TWNS8014B N-Spark twisted wire cup brush offers reliable metal surface cleaning for rust, paint, scale and weld spatter removal. With a 80 mm diameter and sturdy twisted steel wire bristles, this brush handles medium-scale metalwork tasks with ease. Designed for use with angle grinders featuring M14 threads, it is ideal for fabrication shops, maintenance tasks, structural metal prep and general workshop cleaning jobs.

    Versatile twisted wire cup brush from the N-Spark series for general-purpose metal prep

    This brush belongs to Tork Craft’s N-Spark twisted wire range, engineered for durability and effective material removal without excessive sparking — offering safer use in workshop environments. Its mid-sized cup and twisted wire give balanced performance, making it well suited for a wide variety of metal cleaning and prep tasks in professional and DIY settings.

    Add to cartDone

Powered by