“Tork Craft Scotch Eye Auger Bit 22Mm X 400Mm” has been added to your cart.
View cart
Showing 833–848 of 4680 resultsSorted by latest
-
R496,57
Size: 46 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R495,73
Tork Craft Axe Felling — 1.8 kg, Fibreglass Handle (Model TC611800)
Built for demanding timber work, this felling axe pairs a 1.8 kg forged head with a long 860 mm fibreglass handle for powerful, controlled swings. The handle resists moisture and dampens shock, making it a dependable choice for tree felling, bucking logs and heavy site clearing.
-
R495,64
Tork Craft Precision-Max Step Point Drill — 6.0 mm HSS (10-Piece Pack)
Maximise productivity with this 10-bit set of 6.0 mm HSS step-point drills. Designed for consistency in steel, aluminium, plastics and sheet work, the self-centering geometry helps you start holes cleanly and reduce entry wander—even at scale.
-
R495,10
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R495,00
Application:
Racing gloves are a type of personal protective
equipment (PPE) specifically designed to protect the
hands from injury.
The gloves are typically to be used with biking,
motocross, supercross, enduro, extreme enduro
racing and Karting.
- Protects the hands against injury
- Comfortable Fit
- Bright Colour
- Good wear resistance
- Hook & Loop closure
- Neprene & Mesh construction
- Lightweight and comfortable fabric
- Synthetic leather palm with reinforcement
WARNING: The gloves do not offer any fire protection
The gloves provide little or no protection from
puncture injuries
-
R495,00
Application:
Racing gloves are a type of personal protective
equipment (PPE) specifically designed to protect the
hands from injury.
The gloves are typically to be used with biking,
motocross, supercross, enduro, extreme enduro
racing and Karting.
- Protects the hands against injury
- Comfortable Fit
- Bright Colour
- Good wear resistance
- Hook & Loop closure
- Neprene & Mesh construction
- Lightweight and comfortable fabric
- Synthetic leather palm with reinforcement
WARNING: The gloves do not offer any fire protection
The gloves provide little or no protection from
puncture injuries
-
R495,00
Application:
Racing gloves are a type of personal protective
equipment (PPE) specifically designed to protect the
hands from injury.
The gloves are typically to be used with biking,
motocross, supercross, enduro, extreme enduro
racing and Karting.
- Protects the hands against injury
- Comfortable Fit
- Bright Colour
- Good wear resistance
- Hook & Loop closure
- Neprene & Mesh construction
- Lightweight and comfortable fabric
- Synthetic leather palm with reinforcement
WARNING: The gloves do not offer any fire protection
The gloves provide little or no protection from
puncture injuries
-
R495,00
Application:
Racing gloves are a type of personal protective
equipment (PPE) specifically designed to protect the
hands from injury.
The gloves are typically to be used with biking,
motocross, supercross, enduro, extreme enduro
racing and Karting.
- Protects the hands against injury
- Comfortable Fit
- Bright Colour
- Good wear resistance
- Hook & Loop closure
- Neprene & Mesh construction
- Lightweight and comfortable fabric
- Synthetic leather palm with reinforcement
WARNING: The gloves do not offer any fire protection
The gloves provide little or no protection from
puncture injuries
-
R495,00
Application:
Racing gloves are a type of personal protective
equipment (PPE) specifically designed to protect the
hands from injury.
The gloves are typically to be used with biking,
motocross, supercross, enduro, extreme enduro
racing and Karting.
- Protects the hands against injury
- Comfortable Fit
- Bright Colour
- Good wear resistance
- Hook & Loop closure
- Neprene & Mesh construction
- Lightweight and comfortable fabric
- Synthetic leather palm with reinforcement
WARNING: The gloves do not offer any fire protection
The gloves provide little or no protection from
puncture injuries
-
R494,17
Tork Craft Impact Socket — 38 mm, 1″ Drive, 6-Point (Cat No. TCIM50038)
Size: 38 mm socket size — Drive: 1″ (25.4 mm) drive
The Tork Craft 38 mm impact socket (Cat No. TCIM50038) features a robust 6-point internal geometry and heavy-duty construction, designed to handle high-torque impact wrenches in automotive, industrial repair and maintenance environments. Its large 1″ drive makes it suitable for demanding applications where greater leverage and durability are required.
-
R492,27
An angle drive attachment is a tool that allows you to drill or drive screws at an angle. It’s essentially a
right-angle gearbox that fits into your drill’s chuck. This makes it ideal for reaching those hard-to-access areas,
such as corners, tight spaces, or overhead work.
Application:
- DIY, Contractor, Wood working.
- Manufacturing.
- Automotive.
-
R491,57
Tork Craft Shifting Spanner 15" 375mm 0-43.1mm Adjustable Wrench (TC52015)
At a Glance: Heavy-duty 15" (375mm) shifting spanner with 0–43.1mm jaw opening, full-body hardened and made from Chrome Vanadium steel.
When fasteners are big, tight, and not in the mood for negotiation, you need leverage and a jaw that holds its line. The Tork Craft TC52015 Shifting Spanner is a 15" (375mm) adjustable wrench designed for heavier-duty tasks—giving you serious reach, serious torque and a wide jaw range for larger nuts and bolts. With a full-body hardened construction, an extra-wide design for improved grip comfort, and a hardened screw and jaw, it delivers stable adjustment and a confident bite for workshop maintenance, machinery work and general mechanical applications.
Full-Body Hardened Chrome Vanadium Shifting Spanner For High Torque And Larger Fasteners
Ideal for maintenance teams and workshops dealing with mixed and larger fittings. The extended handle helps deliver the turning force you need, while the adjustable jaw keeps the tool versatile across multiple sizes.
-
R491,13
Tork Craft Drill Bit — HSS Morse Taper 19.0 mm × MT2
Heavy-duty 19.0 mm high-speed steel (HSS) twist drill bit with a Morse Taper 2 (MT2) shank, engineered for direct mounting in MT2 taper sockets. Ideal for robust machine drilling in steel, cast iron, aluminium, plastic and workshop applications.
-
R500,00
The battery pack fits all 20V Tork Craft Power Tools, is lightweight Lithium-Ion, and has a 2.0 Ah electric charge.
The battery pack is fitted with LED battery capacity indicator lights and also has vents for cooling.
Recharge only with the Tork Craft TC20VABC-01 and TC20VABC-02 chargers.
-
R498,80
Size: 22.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
-
R498,05
Non-woven pads are an alternative to steel wool.
Benefits of using Non-Woven pads:
- Flexible and can be cut or folded
- Could be used with mild detergents
- Washable and reusable
- Won’t shred, splinter or rust
ABRN005 is an aluminium oxide abrasive pad for heavy duty cleaning or
fast action finishing. Easily removes rust and oxidation from a variety of
metals.
Wear eye protection and protective clothing
