“Tork Craft Double End Stubby Hss 6Mm Packet Of 10” has been added to your cart.
View cart
Showing 1121–1136 of 4680 resultsSorted by latest
-
R341,70
Hole saw diameter:
ø60mm
Application:
The multiple precision ground Tungsten Carbide Tipped hole saw has been
specially developed to cut holes in hard materials such as plastic and metals up
to 14.5mm in thickness.
The hole saw can be used to cut into:
- Mild steel sheets
- Stainless steel sheets
- Steel pipes
- Cast iron
- Fiberglass
- Fibre-reinforced plastic (FRP)
- Aluminium
- Brass
- Vinyl
- Plastic
IMPORTANT:
For the best results and for safety reasons, use the recommended rotation speed
for the material being drilled into.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R341,35
Drill diameter: Ø9.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:
-
R340,30
Material:
Cotton
Width: 30mm
Diameter: Ø150mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R339,80
Tork Craft TCT Saw Blade 185 x 24T 20/16mm ATB Positive for Wood
Heading: 185 mm TCT blade with 24 teeth and 20/16 mm bore for wood cutting
The Tork Craft TCPR18524-20 is a 185 mm TCT circular saw blade designed for ripping and general purpose cutting in timber and common board materials. With 24 tungsten carbide tipped teeth and an ATB (Alternate Top Bevel) positive tooth profile, it excels at fast, straight cuts through softwood, hardwood and construction lumber.
Use it on portable circular saws or small mitre saws for framing, decking, roof work, shuttering, formwork and site carpentry. The 20 mm bore with 16 mm reducing ring allows the blade to fit a range of popular saws, making it a versatile choice for workshop and jobsite use.
Tork Craft Industrial range
The Industrial label on the packaging indicates that this blade forms part of Tork Craft’s industrial quality range, suitable for higher duty cycles and frequent cutting in demanding environments such as workshops, construction sites and light production lines.
-
R339,00
Drill saws in the kit:
- Ø3.0mm
- Ø4.0mm
- Ø5.0mm
- Ø6.0mm
- Ø8.0mm
Application:
Turn your electric drill into a high-speed drill saw. The drill saw is made from
HSS (hi-speed steel) coated with Titanium nitride for superior cutting speed and
edge retention.
The drill saw can be used to drill into or cut/rasp:
- Wood
- Plasterboard
- Masonry board
- Soft metals (non-hardened)
- Plastic
Use the drill saw to drill the starting hole, enlarge the hole, or cut out irregular
shaped holes with ease.
-
R338,10
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economical and practical. Ideal for autobody repair work.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P400
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P240
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P120
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P100
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P60
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,90
Emery cloth is an
abrasive similar to sandpaper, but has a cloth backing instead of a paper backing
making it much more durable. It is spesifically designed for the metal finishing
industry.
SIZE: 25mm width,
50m length
GRIT: P40
The cloth can also be conveniently torn to size. Emery cloth is moreover used
for cleaning or polishing.
-
R336,85
The Slogging Spanner is a versatile and heavy-duty tool designed for industrial and mechanical applications where high torque is required. This robust spanner is built to handle demanding tasks and is an essential tool for professional mechanics, construction workers, and maintenance technicians.
The spanner is crafted from 31CrV (Chrome Vanadium) and ensures durability and longevity, making it suitable for tough working conditions and repetitive tasks.
The unique feature of the Slogging Spanner is its large and thick profile, which allows for increased torque application. This design enables you to apply significant force to tighten or loosen bolts and nuts, making it ideal for heavy-duty applications where conventional wrenches may not be sufficient.
The Slogging Spanner comes in a variety of sizes from 24mm – 85mm to accommodate different bolt and nut dimensions. It is important to select the appropriate size for the specific task to ensure a proper fit and optimal performance.
-
R336,20
Tork Craft Drill Bit — HSS Standard 13.0 mm (Pack of 5)
High-quality 13.0 mm high-speed steel (HSS) drill bits, supplied in a pack of 5. These precision-ground bits deliver consistent performance across steel, aluminium, wood, and plastics. Ideal for workshop and production environments where reliability and accuracy matter.
-
R334,70
Max Chuck Capacity: 16mm
Mount size: JT3 Taper
A drill chuck with a JT3 taper is a tool used to hold and secure drill bits for drilling operations. The JT3 taper
is a standardized conical shape that ensures a secure and accurate fit between the chuck and the machine spindle.
The chuck typically has a key slot or a keyless mechanism to tighten and loosen the jaws, which grip the drill bit.
These chucks are commonly used in various machine tools, including drill presses, milling machines, and lathes.
Application:
- Centering, drilling, tapping, milling, reaming operation.
- To hold a drill bit or other cutting tools on a spindle.
- Automobile manufacturing
- Mold manufacturing
- Machinery manufacturing
-
R334,65
Application:
The tool pouches are used when a toolbox is not easily accessible. Tools that
are often used are easily stored in the tool pouch’s pockets when working on a
ladder or working at heights.
Features:
- The pouches have been stitched and reinforced with rivets for added
durability.
- 4 Main pouches for utility tools and nails.
- Measuring tape holder.
- 2 loops.
- Quick release buckle with adjustable belt.
