“Tork Craft Plier 3Pc Kit Comb Side Long Nose Plier Set” has been added to your cart.
View cart
Showing 1185–1200 of 4680 resultsSorted by latest
-
R311,90
Drill diameter: Ø5.5mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is precision fully ground
at 135° with a split point. The drill bit can be used to drill materials such
as iron, steel, non-ferrous metals and plastics.
Advantages:
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will cut most materials.
Industrial HSS 135° angle point drill bits are designed to cut metal. The
split point adds 2 extra cutting edges with the adantage of reducing the amount
of pressure required to perform the cut.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
-
R311,70
Thread size: M22
Total Length: 200mm
Classification: Industrial (Blue)
The Adaptor SDS Plus 200mm x M22 for Diamond Core Bits is an essential extension accessory designed to enhance the reach and versatility of professional drilling equipment. Unlike a standard short coupler, this adaptor provides a generous 200mm length, allowing contractors to easily core through thick walls, deep masonry, or hard-to-reach locations without requiring a specialist extra-long core bit.
Functionally, it is a robust bridge between the drill and the cutting tool. The drive end is fitted with an SDS Plus shank, ensuring a quick and secure fit into a standard rotary hammer drill. The working end features a precision-machined M22 external thread, which is compatible with a wide range of dry-cut diamond core bits used in plumbing, electrical, and HVAC installations.
Constructed from high-tensile steel, the 200mm length extension maintains rigidity under load, effectively transmitting the rotary hammer’s power and torque to the diamond segments. This configuration is indispensable for projects where deep penetration is required, ensuring that the user can drill neat, clean, and accurately placed holes while maintaining a safe and manageable operating distance.
<!-- 
-->
Application:
- Fit into the diamond core bits.
- The Drift key is a wedge used to remove the pilot drill from the Dry Cut Diamond Core Drill adaptor with a hammer. See illustration below.
- Plumbing
- Electrical
- Construction
- DIY
NOTE:
The pilot drill bit is not included with the adaptors and it is available separately – TC18PILOT
INFORMATION:
Use the drift key TC18KEY to remove or replace the pilot drill bit from the adaptors.
-
R311,00
Hole saw diameter:
ø55mm
Application:
The multiple precision ground Tungsten Carbide Tipped hole saw has been
specially developed to cut holes in hard materials such as plastic and metals up
to 14.5mm in thickness.
The hole saw can be used to cut into:
- Mild steel sheets
- Stainless steel sheets
- Steel pipes
- Cast iron
- Fiberglass
- Fibre-reinforced plastic (FRP)
- Aluminium
- Brass
- Vinyl
- Plastic
IMPORTANT:
For the best results and for safety reasons, use the recommended rotation speed
for the material being drilled into.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R310,85
Tork Craft Contractor TCT Circular Saw Blade 230 mm × 60 T × 16 mm
Highlights: 230 mm diameter Contractor Series blade with 60 precision-tipped carbide teeth and fixed 16 mm bore for professional performance
The Tork Craft Contractor TCT Circular Saw Blade 230 mm × 60 T × 16 mm is part of the Contractor Series — built for tradespeople who demand reliable, high-quality cuts every time. With 60 tungsten carbide-tipped teeth, it delivers smooth, cleaner edges on softwoods, many hardwoods and wood-based panel materials.
Its fixed 16 mm bore ensures direct mounting without the need for reducing bushes or adapters, simplifying setup and reducing downtime. Designed for professional use, the Contractor Series construction means no compromise — dependable, durable and ready for real-world cutting tasks.
What is the Tork Craft Contractor Series TCT circular saw blade?
The Contractor Series from Tork Craft is a professional-grade range developed for trade use—blades built to last, designed for durability, consistent performance, and minimal fuss in busy site or workshop environments.
-
R310,80
Size : 29MM
Application:
The Tork Craft Offset combination spanners features an anti-slip design open
ended and closed ring profile, it has an offset angle for usage in confined
spaces, for automotive, DIY, construction & manufacturing
- Anti-slip design
- Open ended and closed ring profile
- Offset angle for usage in confined spaces
-
R309,60
Tork Craft Contractor TCT Circular Saw Blade 230 mm × 40 T × 16 mm
Highlights: 230 mm diameter Contractor Series blade with 40 carbide-tipped teeth and fixed 16 mm bore for trade use and easy fitment
The Tork Craft Contractor TCT Circular Saw Blade 230 mm × 40 T × 16 mm is part of the Contractor Series — designed for professionals who need reliable, everyday cutting blades. With 40 tungsten carbide-tipped teeth, this blade offers efficient, clean cutting across softwoods, selected hardwoods and wood-based panel materials.
Its fixed 16 mm bore allows for direct mounting on saws with this arbor size, eliminating reducing bush complexity and reducing setup time. Built under the Contractor Series, this blade emphasises durability and consistent results rather than compromise.
What is the Tork Craft Contractor Series TCT circular saw blade?
The Contractor Series from Tork Craft is a professional-grade line built for tradespeople who rely on their tools daily. These blades are made for real-world job-site and workshop conditions — tough, consistent and dependable.
-
R309,60
Maximum Thrust Force: 4500N
Cartridge Compatibility: 310ml
<!-- ![]()
-->
This professional-grade silicone caulk gun, with its robust 4500N metal construction, is engineered for superior
durability and efficient application. Designed to accommodate standard 310ml single cartridges, it delivers a
powerful dispensing force, ensuring smooth and consistent beads of sealant even with high-viscosity materials. The
sturdy metal frame provides excellent stability and leverage, making it ideal for prolonged use in demanding
environments, while its ergonomic design minimizes user fatigue for precise and effortless caulking on a variety of
projects.
Application:
- General Construction Joint Filling
- Automotive Body Sealant Application
- DIY
-
R309,10
AirCraft Muffler Metal Flat 1/2" BSP Male (SG VS-15)
At a Glance: Compact metal exhaust muffler with 1/2" BSP Male (M) thread for quieter pneumatics
When your pneumatic system runs with bigger airflow, exhaust noise can ramp up fast. The AirCraft SG VS-15 Muffler Metal Flat is a screw-in exhaust silencer for 1/2" BSP male ports, designed to diffuse exhausting air and reduce the sharp discharge sound from valves, manifolds and air control components. Its flat, compact profile keeps installs tidy while the metal construction is built for hard-working workshop and industrial environments.
Standout feauture or series/quality/range: Flat-profile metal muffling for higher-flow exhaust ports
The 1/2" BSP connection suits larger exhaust points, while the flat metal design helps keep space usage low and durability high—quieting the system without bulky add-ons.
-
R309,10
AirCraft Muffler Metal Conical – 1/2" Male (SG AAS-15)
At a Glance: 1/2" Male Conical Metal Muffler for Pneumatic Exhaust Noise Reduction
Compressed air exhaust can be loud, messy and disruptive—especially on busy workshop lines. The AirCraft SG-AAS-15 Metal Conical Muffler is a simple, effective
add-on that screws into a compatible 1/2" female exhaust port to help reduce exhaust noise and soften the blast of exiting air. It’s a practical upgrade for
pneumatic valves, cylinders and air equipment where you want a quieter, more controlled exhaust without changing the rest of your setup.
Noise control made simple: a conical metal exhaust muffler for pneumatic systems
This conical muffler design helps diffuse exiting air, taking the edge off sharp exhaust bursts. It’s ideal for maintenance replacements, new installations,
and anywhere you want a cleaner, calmer compressed air environment.
-
R308,95
Size: 31 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R308,95
Size: M18
Thread: 2.5mm
<!-- 
-->
This die is a precision threading tool designed for a variety of metalworking applications. Constructed from
high-speed steel (HSS), it provides exceptional durability and the ability to cut clean, accurate threads on a range
of materials. The hexagonal shape allows for easy use with a standard wrench or socket, making it versatile for both
on-the-job repairs and workshop projects. This particular die is engineered to create M18 x 2.5mm threads, which are
a common metric coarse thread size. Packaged on a single card, it is ideal for individual purchase and easy display
in retail settings, offering a convenient and reliable solution for professionals and DIY users.
Application:
- For cutting external threads
- Thread repair and cleaning
- Construction
- Manufacturing
- DIY
-
R308,35
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts 100mm wide and 530mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 100mm x 530mm
Grits Available: P40, P60, P80, P100 and P120
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. Short belts cause extreme load on the roller shafts and bearings/bushings,
shortening the machine’s lifespan.
-
R308,35
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts 100mm wide and 530mm
long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 100mm x 530mm
Grits Available: P40, P60, P80, P100 and P120
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. Short belts cause extreme load on the roller shafts and bearings/bushings,
shortening the machine’s lifespan.
-
R308,20
Tork Craft Plier 3 Piece Kit — Comb / Side / Long Nose (Model TC603003)
Packaging: Kit boxed set — sold as each
This versatile 3-piece plier set from Tork Craft is a must for any tradesperson or DIY enthusiast. The set includes a combination plier, a side-cutting plier and a long-nose plier — covering gripping, cutting and reach tasks in one kit. Built with durable materials and ergonomically shaped handles, this kit brings professional reliability to general purpose use whether you’re on the job site or working around the home.
Application:
- Cutting conductors, bending leads, pulling cables, crimping light terminals.
- Holding parts, cutting wire, removing pins, gripping bolts.
- Small repairs, assembling fixtures, crafting, and general household tasks.
- Cutting binding wire, gripping materials, routing cables.
- Precision handling of components (long nose) and trimming leads (side cutter).
- Plumbing
- Construction
- Automotive
- DIY
-
R308,00
Content: Ø2, 3, 4, 5, 6, 8mm
An industrial step point HSS drill set is a versatile tool designed for drilling holes of varying sizes in various
materials. The ‘step point’ refers to the drill bit’s unique design, featuring multiple concentric steps or levels.
This design allows for quick and efficient drilling of different diameter holes without requiring multiple
individual drill bits.
Application:
- For drilling stainless steel, mild steel, and plastic.
- For Industrial use such as steel fabrication, DIY and automotive.
-
R305,70
Size: 30 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Tork Craft Clamp Quick 300Mm 12' Spreader