“Tork Craft Blade Tct 250 X 40T 16Mm General Purpose Combination” has been added to your cart.
View cart
Showing 1409–1424 of 4680 resultsSorted by latest
-
R245,45
Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Prism Face
Highlights: 150 mm width × 32 mm face height, aluminium body, prism-face design for multi-angle clamping
The Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Prism Face set is engineered to enhance your workshop’s clamping capability with quick magnetic jaws that deliver precision and flexibility. These magnetic jaws are designed to replace or upgrade your standard vise jaws and bring magnetic versatility to tasks like machining, inspection, grinding or fabrication.
Crafted from lightweight yet strong aluminium and equipped with magnetised bases, the jaws securely grip ferrous work-pieces and the prism-face configuration allows for clamping at 90°, 45° or flat surfaces. This makes it ideal for holding round stock, profiles, plates or odd-shaped components with ease and speed, all while maintaining alignment and reducing setup time.
-
R245,05
Tork Craft TCT Circular Saw Blade — 250 × 40T × 30/20/16 mm (General-Purpose Combination)
Size: 250 mm diameter × 40 teeth [Bore: 30/20/16 mm]
A reliable all-rounder for the workshop and jobsite. This 250 mm Tork Craft blade uses 40 tungsten-carbide tipped teeth and a stable plate to balance ripping speed with a smooth cross-cut finish. It tracks straight through framing timber, sheet goods and laminates, delivering tidy, predictable results.
-
R245,05
Tork Craft TCT Circular Saw Blade — 250 × 40T × 16 mm (General-Purpose Combination)
Size: 250 mm diameter × 40 teeth [Bore: 16 mm]
A dependable all-rounder. This 250 mm, 40-tooth Tork Craft TCT blade balances cutting speed with a clean finish, so you can rip framing stock in the morning and cross-cut sheet goods in the afternoon without swapping blades. Tungsten-carbide tips keep their edge and a stable plate tracks straight through softwoods, hardwoods, plywood and MDF.
-
R245,05
Size : 26MM
Application:
The Tork Craft Offset combination spanners features an anti-slip design open
ended and closed ring profile, it has an offset angle for usage in confined
spaces, for automotive, DIY, construction & manufacturing
- Anti-slip design
- Open ended and closed ring profile
- Offset angle for usage in confined spaces
-
R245,05
Daimeter: ø25.0mm
Shank: 3 flattened sides
Application:
A MAD bit is referred to as a Multi Angle
Drill bit.
The drill bit is designed to cut smoothly in all directions. It allows you to
have full control of the cutting path, thanks to its ingenious geometry.
Multi Angle Drill bits can cut in a curve or straight. It works great for decking,
floor boards, stair cases or even if you want to build your own pergola. It is an
addition to any woodworking project. It also gives the professional user the unique
capability to rectify misalignment errors.
The drill bit is coated with Titanium nitride to add longer life to the cutting
edges.
Used for:
- Drilling
- Routing
- Milling
- Channeling
Recommended speeds:
- Soft wood: 2400RPM
- Hard wood: 700RPM
-
R245,00
Size: 32 mm
Drive: 1/2 inch
Application:
The Fixman drive deep socket allows you to use a socket wrench in inaccessible places, especially if you have an extension on the driver. Made of high-quality Chrome vanadium steel, increased contact area with a micro finish.
- Made of high-quality chrome vanadium steel
- Increased contact area
- CR-V steel body
- Micro finish
-
R245,00
FIXMAN combination wrenches are made of durable chrome vanadium steel.
The design includes a non-slip surface and micro finish. Available in sizes 6 to 32mm. This product complies with the
DIN 3113 standard.
STANDARD by Deutsches Institut Fur Normung E.V. (German National Standard).
-
R244,00
Tork Craft Claw Hammer — 700g (16oz), Fibreglass Handle (Model TC604700)
Packaging: Single tool boxed or carded — sold as each
This Tork Craft claw hammer features a 700g (16oz) drop-forged head and a 295mm fibreglass handle designed for strength and vibration reduction. The full polished head gives a clean aesthetic and makes nail-striking and claw extraction efficient and comfortable. Ideal for construction, carpentry, DIY and general hand-tool use.
-
R244,00
Input Voltage: 12V DC
Output Voltage: 20V – 2.3A
This Tork Craft Battery Charger is designed specifically for 20V batteries. It features a standard 12V car charger
port, allowing you to conveniently charge your batteries from a variety of power sources. With a charging current of
2.3A and a cable length of 0.8 meters, it offers efficient and flexible charging options.
Application:
- Compatible will all Tork Craft 20V cordless tool batteries.
- Charging power tools direct from the 12V vehicle outlet.
-
R243,75
Tork Craft Precision-Max Step Point Drill — 12.0 mm HSS (1 Piece)
Drill reliably with this 12.0 mm high-speed steel (HSS) step-point bit. Its self-centering geometry, split point and tri-flat shank help reduce walking and slipping, producing straight, clean holes even in tougher metals and plastics.
-
R243,65
AirCraft PU Hose Fitting Valve 10mm x 1/2" Male Thread (SG HVSF04-10)
At a Glance: Inline adjustable flow control valve with 10mm push-in tube fitting and 1/2" male thread connection.
The AirCraft SG HVSF04-10 PU hose fitting valve is built for pneumatic lines where you need the convenience of a push-in tube connection and the strength of a larger 1/2" threaded port.
Featuring a 10mm push-in fitting and a 1/2" male threaded end, it gives you hands-on control of airflow to cylinders, actuators, air tools and pneumatic circuits where smoother response and repeatable settings matter.
Adjust the control knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for bigger connections and smoother performance
This valve is commonly used as a flow control or speed controller in compressed air systems.
It allows you to restrict airflow with a simple adjustment, helping you manage actuator speed, soften tool response, or stabilise air delivery.
The flow direction marking assists correct installation for consistent, predictable control.
-
R243,00
Tork Craft Replacement Insert Pack — 10-Piece M8 × 1.25 mm × 11.7 mm (Model NR7008125-01)
The Tork Craft NR7008125-01 pack includes 10 stainless steel inserts sized M8 × 1.25 mm with a length of 11.7 mm. These inserts are designed for compatibility with the thread repair kit model NR7008125, allowing you to replenish used inserts and maintain thread-repair capability in service, workshop or maintenance environments.
-
R242,95
Size: 10.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.
For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:
A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.
The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Handle is NOT included
-
R242,95
Diameter: Ø230mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
-
R242,90
Tork Craft Wire Cup Brush Twisted 125mm x M14 High Speed 9000rpm Blister Packaging
At a Glance: 125mm twisted wire cup brush with M14 thread rated for 9000rpm high-speed grinding
The Tork Craft TCW TW12014HS high-speed wire cup brush is built for rapid surface preparation. Its tightly twisted steel wire and balanced 125mm cup design allow you to clean rust, paint, weld spatter and scale efficiently at speeds up to 9000rpm. Designed for angle grinders with M14 spindles, this brush is ideal for metal fabricators, panel shops, maintenance teams and serious DIY users needing quick removal and a uniform finish.
High-speed twisted wire cup brush for fast cleaning
Part of Tork Craft’s professional twisted cup brush series, this high-speed model delivers aggressive cutting action without sacrificing control. The blister packaging makes it retail ready, while its heavy-duty wire and balanced construction extend service life on demanding cleaning applications.
-
R242,50
Material:
Cotton
Diameter: Ø200mm
Ply: 50
Bore: Ø1/2′
Usage: Use with finishing compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
