“Tork Craft Pliers Combination High Leverage Crv 160Mm Indusrial” has been added to your cart.
View cart
Showing 1505–1520 of 4680 resultsSorted by latest
-
R228,95
Grit: #50
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,78
Size: 25 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,35
Pattern: Standard
Density: Soft
Colour: Red
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR |
POLISH |
COMPOUND |
| White |
Good |
Best |
| Orange |
Good |
Best |
| Red |
Best |
|
| Black |
Best |
|
Compounding sponge range:
| ORDER NO. |
DENSITY |
COLOUR |
DIAMETER |
THREAD |
PATTERN |
|
SPC00101 |
Firm |
Orange |
ø200mm |
Hook & Loop |
Standard |
|
SPC00100 |
Soft |
Yellow |
ø200mm |
Hook & Loop |
Standard |
|
SPC00102 |
Soft |
Red |
ø200mm |
Hook & Loop |
Standard |
|
TCCS15058 |
Firm |
White |
ø150mm |
5/8 UNC |
Standard |
|
TCCS15014-1 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014-4 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014 |
Firm |
Orange |
ø150mm |
M14 |
Standard |
|
TCC15014-2 |
Soft |
Red |
ø150mm |
M14 |
Standard |
|
TCCS15014-3 |
Soft |
Black |
ø150mm |
M14 |
Standard |
|
TCCS15014-5 |
Soft |
Black |
ø150mm |
M14 |
Waffle |
|
SPC00124 |
Firm |
Blue |
ø125mm |
Hook & Loop |
Standard |
NOTE:
For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher’s thread:
-
R228,05
Size: 89 mm
Application:
Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials.
Bi-metal refers to an object that is composed of two separate metals joined together. Instead of being a mixture of two or more metals, like alloys, bimetallic objects consist of layers of different metals.
- Ideal for cutting stainless steel, mild steel, iron, aluminium, pvc &
wood
- Improved chip clearance
- Cobalt steel
- Alternating tooth patten
- Material release slots to clear material efficiently
- Ultra thin kerf for accurate cuts
- 38mm cut depth for all sizes
- Use mandrel, TC17002, TC17003, TC17007
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R227,45
Length: 160mm
Jaw Length: 37mm
Maximum Jaw Opening Capacity: 30mm
<!-- ![]()
-->
High leverage CrV industrial combination pliers are a type of pliers designed for heavy-duty tasks. They are made
from chrome vanadium steel (CrV), a strong and durable alloy that provides excellent resistance to wear and tear.
The ‘high leverage’ design refers to the pliers’ ability to exert a greater force with less effort, making them
ideal for gripping, bending, and cutting tough materials.
Application:
- Bending and cutting metal wire and electrical cable
- Construction
- DIY
-
R227,45
Tork Craft Screwdriver Insert & Socket Bit Set — 23 Piece (Model KT6244)
This 23-piece Tork Craft set combines both screwdriver insert bits and socket bits with a convenient bit holder for quick changes. Made from chrome vanadium (CrV) steel for durability and reliability, the set is well-suited for toolbox, workshop or general household use.
-
R227,35
AirCraft PU Hose Fitting Valve 10mm x 1/8" Male Thread (SG HVSF01-10)
At a Glance: Inline adjustable flow control valve with 10mm push-in tube fitting and 1/8" male thread connection.
The AirCraft SG HVSF01-10 PU hose fitting valve gives you simple, reliable control over airflow in your pneumatic system.
With a 10mm push-in tube connection and a 1/8" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and general pneumatic circuits where smooth response matters.
Adjust the control knob to fine-tune flow, reduce harsh starts, and keep air-powered equipment operating more predictably.
Inline airflow control for smoother pneumatic operation
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit the application.
It’s a great addition when you want better control over actuator speed, gentler tool response, or a more stable air supply.
The flow direction marking assists correct installation for consistent performance.
-
R227,35
Clamps in the set:
- (x1) G-clamp with 25mm clamp capacity.
- (x1) G-clamp with 50mm clamp capacity.
- (x1) G-clamp with 75mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.
-
R226,80
Tork Craft Impact Socket — 25 mm, ½″ Drive, 6-Point Deep (Model TCIM21025)
The Tork Craft TCIM21025 impact-rated deep socket is built for demanding tasks. Featuring a 25 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
-
R226,60
Tork Craft Wire Cup Brush Twisted 125 mm M14
At a Glance: 125 mm diameter twisted-wire cup brush with M14 arbor — heavy-duty brush for metal surface cleaning and prep
The Tork Craft Wire Cup Brush Twisted 125 mm M14 (model TCW TW12014B) is a powerful, industrial-grade cup brush engineered to tackle demanding metal surface preparation tasks. Its 125 mm diameter cup and twisted steel wire filaments deliver aggressive, high-impact cleaning — ideal for removing rust, corrosion, old paint, weld slag, scale, and stubborn coatings from steel, castings and structural metal surfaces. The M14 arbor thread ensures compatibility with standard angle grinders and many power tools, turning them into efficient surface-prep machines for fabrication, maintenance and workshop projects.
Industrial-strength twisted-wire cup brush for heavy-duty metalwork and surface prep
Built with a robust steel cup body and tightly twisted wire filaments, this brush provides consistent, powerful cleaning even under tough conditions. It excels at stripping old paint, cleaning weld seams, blasting off rust or corrosion from large metal sheets, plates and structural components. Whether prepping metal before painting, welding or coating — this cup brush ensures deep cleaning, improved surface adhesion and long-lasting finish quality. Supplied as a single heavy-duty brush (not blister-pack extras), it’s ideal for professional metalworkers, fabrication shops, maintenance teams and serious DIYers.
-
R226,55
Works with Kit NR5008
Thread length: 16 mm
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R226,45
Tork Craft Engineers Hammer — 1.0 kg, Fibreglass Handle (Model TC615100)
Designed for professionals in metal fabrication and engineering, this Tork Craft engineers hammer features a 1.0 kg drop-forged head and a durable 370 mm fibreglass handle. The compact length and strong build make it ideal for precise striking in tight spaces, while withstanding heavy-duty workshop demands.
-
R226,10
Tork Craft Hammer Mason — 450 g (16 oz), Fibreglass Handle (Model TC612450)
Built for the rigours of masonry and general-purpose striking, the Tork Craft Hammer Mason features a 450 g (16 oz) drop-forged head and a durable fibreglass handle for superior shock resistance and durability. Ideal for bricklaying, block work, and everyday site use where reliable striking and long life are needed.
-
R225,90
Diameter: 19 mm
Length: 460 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R225,30
Tork Craft Screwdriver Bit & Socket Set — 24 Piece with T-Bar (Model KT7124)
A versatile 24-piece kit combining a T-bar driver for extra torque with a curated selection of 1/4″ bits and sockets. Housed in a compact case, it’s a great everyday set for assembly jobs, household maintenance, and on-site fixes.
-
R225,10
Round face flat, plain: 700g (16oz)
<!-- ![]()
-->
This durable ball pein hammer boasts a robust carbon steel head expertly forged for optimal strength and impact
resistance. The ergonomically designed fiberglass handle provides a secure and comfortable grip, minimizing hand
fatigue during extended use. Its lightweight yet sturdy construction offers excellent balance and control, enabling
precise strikes with ease. Whether you’re shaping metal, driving nails, or tackling other demanding tasks, this
hammer is a reliable and efficient tool that will stand the test of time.
Application:
- For striking punches and chiseling material.
- Used for shaping, flattening or removing dents from metal sheets.
- Riveting, metal fabrication, forging, and sheet metal work.
- Metal fabrication, automotive manufacturing, blacksmithing, and general metalworking.
- DIY
