Showing 97–112 of 150 resultsSorted by latest
-
R148,00
Diameter: Ø12.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R147,00
Core diameter: Ø45mm
Depth: 72mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R146,00
Diameter: 19 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R142,00
Diameter: Ø18.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R136,00
Diameter: Ø10.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R131,00
Diameter: 12 mm
Length: 460 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R127,00
Diameter: Ø25.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R127,00
Diameter: Ø16.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R126,00
Diameter: 20 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R126,00
Diameter: 19 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R124,00
Adaptor length: 70mm
Thread: M16
Connection type: SDS Plus
Application:
This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your rotary hammer.
Make sure the threads are the same as the Dry Cut Diamond Core Drill – M22 or
M16.
Take note that there are 2 connection types:
List of different adaptors:
1. Hex shank adaptors for the Dry Cut Diamond Core Drill range:
- Hex shank 70mm, M16 thread –
TC18HEX1
- Hex shank 200mm, M16 thread –
TC18HEX2
- Hex shank 300mm, M16 thread –
TC18HEX3
- Drift key for removing the pilot drill –
TC18KEY
- Pilot drill bit (not included with adaptors)-
TC18PILOT
2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range:
- SDS Plus 70mm, M16 thread –
TC18SDS1
- SDS Plus 200mm, M16 thread –
TC18SDS2
- SDS Plus 300mm, M16 thread –
TC18SDS3
- SDS Plus 70mm, M22 thread –
TC18SDS4
- SDS Plus 200mm, M22 thread –
TC18SDS5
- SDS Plus 300mm, M22 thread –
TC18SDS6
- Drift key for removing the pilot drill –
TC18KEY
- Pilot drill bit (not included with adaptors)-
TC18PILOT
NOTE:
The pilot drill bit is not included with the adaptors and it is available
separately –
TC18PILOT
INFORMATION:
Use the drift key
TC18KEY to remove or replace the
pilot drill bit from the adaptors.
-
R119,00
Drill diameter: Ø18.0mm
Packaging: Carded 1
Drill bit: TCT (Tungsten carbide tipped)
Application:
The drill bit is used to drill holes in masonry
or concrete, thanks to the
uniquely designed TCT (tungsten carbide tipped) point.
A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the
depth gauge on the drill to achieve the correct depth before drilling into
walls.
TIP:
Have a wall scanner (detector) ready before drilling into walls.
CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break
the conversion chuck.
-
R116,00
Daimeter: Ø25.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R114,00
Diameter: 18 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R112,00
Diameter: Ø14.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R112,00
Diameter: Ø22.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
