“Tork Craft 100Mm Diamond Polishing Pad 300 Grit Dry Use” has been added to your cart.
View cart
Showing all 11 resultsSorted by latest
-
R228,95
Grit: #3000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #2000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #1000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #500
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #300
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #150
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #100
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #50
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R66,00
Total width: 35mm
Profile: Double face fingertip
Classification: Standard (Yellow)
<!-- 
-->
The Quick Change Base & Arbor 35mm Double-Face Fingertip Felt Polishing Pad is an essential accessory engineered for
swift and efficient precision polishing in tight or detailed areas. At its core, the system features a robust 35mm
diameter felt polishing pad. This specific pad utilizes a double-face (D/F) construction, meaning both sides of the
dense felt are usable, which effectively doubles the pad’s life and maximizes its value for applying polishing
compounds or removing light surface blemishes on a variety of materials.
The key benefit of this system lies in its innovative Quick Change Base & Arbor. This mechanism facilitates rapid,
tool-free swapping of the felt pad, a crucial feature that significantly reduces user downtime. This rapid-change
capability makes the system perfect for professionals whose work requires frequent changes between compounds or
grades, ensuring maximum efficiency and minimal interruption to the workflow.
Its fingertip size provides superior maneuverability and control, specifically designed to address intricate or
hard-to-reach surfaces. By offering focused polishing power, users can achieve a high-quality, professional-grade
finish on delicate components, deep grooves, or complex contours that standard pads cannot reach. This combination
of precision, speed, and the extended use provided by the double-face design makes it a valuable tool for detailed
finishing work.
Application:
- For fine polishing in hard to reach places.
- Manufacturing
- DIY
-
R60,00
Total width: 35mm
Profile: Fingertip
Classification: Standard (Yellow)
<!-- -->
The Quick Change Base & Arbor 35mm Fingertip Felt Polishing Pad is an indispensable tool designed for achieving
high-precision finishes in confined and intricate areas. The system centers on a compact 35mm diameter felt
polishing pad, which offers the density and structure necessary for effective compound application and the removal
of light imperfections. This pad is perfectly sized for targeted polishing jobs on materials like metal, jewelry,
stone, or specialized automotive components.
The paramount feature of this accessory is the Quick Change Base & Arbor. This innovative mechanism allows users to
rapidly attach and detach the felt pad without the need for additional tools. By facilitating swift, effortless
swaps, the system significantly minimizes downtime, making it a highly efficient solution for professional
environments that require working through multiple polishing stages or compounds.
Engineered with a fingertip profile, the pad grants users exceptional control and maneuverability. This small form
factor enables focused polishing in grooves, along edges, and on delicate contours where larger pads cannot
effectively operate. The combination of precision size and quick-change capability ensures consistently high-quality
results, establishing this tool as a must-have for detailed surface finishing and restoration projects.
Application:
- For fine polishing in hard to reach places.
- Manufacturing
- DIY
-
R115,00
Total width: 80mm
Profile: Delta
Classification: Standard (Yellow)
<!-- -->
The Quick Change Base & Arbor 80mm Delta Felt Polishing Pad is a highly specialized accessory designed for efficient
and thorough polishing across large, angular, or difficult-to-reach flat surfaces. The core of this system is an
80mm delta-shaped felt pad, which utilizes high-density felt material for effective application of polishes and
compounds. This triangular ‘delta’ shape allows the user to easily access corners, tight edges, and complex contours
that conventional round pads cannot manage.
A key efficiency feature of this tool is the integrated Quick Change Base & Arbor. This mechanism enables operators
to rapidly and securely swap the felt pad without the need for additional tools. By drastically minimizing the
changeover time, the system ensures maximum productivity, making it an ideal choice for multi-stage polishing jobs
or professional applications where speed and consistency are paramount.
The combination of the large 80mm size with the delta tip geometry ensures that users can cover a significant
surface area quickly while maintaining precision into corners. This makes the pad particularly valuable in
restoration work, automotive detailing (such as dashboard or pillar trim), and woodworking, where a professional,
high-gloss finish is required on complex, non-linear surfaces.
Application:
- For fine polishing on flat surfaces
Tork Craft Pig Tail For Bench Grinders 16Mm Right Hand