Aircraft Pu Hose Fitting Manifold 4 X 10Mm Port X 1/4’M
R66,00
AirCraft PU Hose Fitting Manifold 4 x 10mm Ports x 1/4" Male (SG APKD10-02)
At a Glance: 4-Port Manifold: Four 10mm Push-In Outlets with 1/4" Male Thread Inlet
When you need one air feed to supply multiple lines neatly, the AirCraft SG APKD10-02 PU hose fitting manifold is a tidy, compact solution. It features a 1/4" male threaded inlet and four quick push-in ports for 10mm pneumatic tubing—ideal for distributing air to several actuators, valves or air-assisted stations while keeping your installation clean, organised and easy to maintain.
This manifold-style fitting acts as a mini air distribution block: connect it to a 1/4" threaded port, then run up to four 10mm tube lines from the push-in outlets. Perfect for automation, packaging rigs, air-assisted applications and workshop pneumatics where tidy routing matters.
Free shipping on orders over R2000!
- Satisfaction Guaranteed
- Quality Spares, Accessories & Tools
- Secure Payments
Description
AirCraft PU Hose Fitting Manifold 4 x 10mm Ports x 1/4" Male (SG APKD10-02)
At a Glance: 4-Port Manifold: Four 10mm Push-In Outlets with 1/4" Male Thread Inlet
When you need one air feed to supply multiple lines neatly, the AirCraft SG APKD10-02 PU hose fitting manifold is a tidy, compact solution. It features a 1/4" male threaded inlet and four quick push-in ports for 10mm pneumatic tubing—ideal for distributing air to several actuators, valves or air-assisted stations while keeping your installation clean, organised and easy to maintain.
This manifold-style fitting acts as a mini air distribution block: connect it to a 1/4" threaded port, then run up to four 10mm tube lines from the push-in outlets. Perfect for automation, packaging rigs, air-assisted applications and workshop pneumatics where tidy routing matters.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG APKD10-02 |
| Product Type | Pneumatic Manifold / Air Line Distributor |
| Outlet Ports | 4 x Push-In (for 10mm Tube) |
| Tube Size | 10mm (OD) |
| Inlet Thread | 1/4" Male |
| Configuration | 4-Way Distribution |
| Typical Use | Compressed Air / Pneumatic Systems |
Features
- Four push-in outlets Connect up to four 10mm pneumatic tube lines quickly.
- 1/4" male threaded inlet Fits common pneumatic ports on regulators, valves and manifolds.
- Compact manifold body Keeps air line routing organised in tight installations.
- One-touch tube connections Quick assembly and easier maintenance without special tools.
Benefits
- Neater systems: Creates a central distribution point to reduce clutter and simplify routing.
- Faster installs: Push-in ports make tubing runs quick and clean.
- Easy to expand: Add or reroute lines without rebuilding your whole air circuit.
Extra Information
- Designed for 10mm outside diameter pneumatic tubing (commonly PU/nylon air line).
- The inlet is a 1/4" male thread for connection to standard pneumatic ports and adapters.
- Use an appropriate thread sealing method where required and avoid overtightening—tighten firmly, then leak-check.
Pro Tip
- Cut tube ends square and clean before inserting. Push fully until seated, then tug lightly to confirm each line is locked. Once pressurised, check all outlets for leaks for a reliable setup.
Safety
- Always isolate and depressurise the air system before installing or removing pneumatic fittings.
- Wear eye protection when working with compressed air lines and pressurised components.
- After installation, check for leaks using soapy water or an approved leak-detection method.
- Do not use damaged tubing or fittings, and never exceed the pressure ratings of your pneumatic system components.
Additional information
| Weight | 0,05 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.