Showing 49–64 of 64 resultsSorted by latest

  • Tork Craft Microfibre Cloth Grey 300Mm X 300Mm 20Pc Roll Tear-Off 180Gsm

    Tork Craft Microfibre Cloth Grey 300Mm X 300Mm 20Pc Roll Tear-Off 180Gsm

    R160,00

    MICROFIBRE CLOTH GREY – 20PC ROLL | 300mm x 300mm | 180GSM | TEAR-OFF

    Product Code: SPC00105
    Colour: Grey
    Quantity: 20 Cloths per Roll (Perforated)
    Cloth Size: 300mm x 300mm each
    Material Weight: 180 GSM
    Composition: 80% Polyester / 20% Polyamide

    Product Overview:

    This Grey Microfibre Cloth Roll is a convenient and space-saving solution for professional and home cleaning.
    Pre-cut with tear-off perforation, each roll includes 20 reusable microfibre cloths designed for fast, efficient, and hygienic use.
    The soft yet durable 180GSM fabric makes it perfect for everyday cleaning tasks.

    Key Features:

    • Tear-Off Roll Design: Easily dispense one cloth at a time without unfolding or cutting.
    • Compact & Hygienic: Keeps cloths clean and ready to use—ideal for trolleys, kitchens, workshops, and more.
    • Ultra-Fine Microfibre: Removes dust, grease, and grime using only water if needed.
    • Non-Abrasive & Lint-Free: Safe for glass, electronics, painted surfaces, and stainless steel.
    • Eco-Friendly: Replaces disposable wipes—machine washable and reusable many times over.
    • Multi-Purpose: Suitable for household, automotive, janitorial, and commercial cleaning tasks.

    Suggested Uses:

    • Kitchens and countertops
    • Automotive interiors and exteriors
    • Monitors, TVs, and mobile screens
    • Glass, mirrors, and chrome
    • Offices and industrial workspaces

    Care Instructions:

    • Machine wash cold or warm
    • Do not use fabric softeners or bleach
    • Tumble dry low or air dry
    • Do not iron

    Upgrade your cleaning toolkit with this MICROFIBRE CLOTH GREY 20PC TEAR-OFF ROLL —
    a smart, reusable alternative to single-use wipes and bulky cloths.

    Add to cartDone
  • Tork Craft Compounding Sponge 150Mm X M14 White Hard Foam Pad

    Tork Craft Compounding Sponge 150Mm X M14 White Hard Foam Pad

    R153,00

    Compounding sponge


    Pattern:     Standard
    Density: Firm
    Colour: White
    Diameter: Ø150mm
    Thread/Hook & Loop: M14

     Application:

    The compounding sponge should be used with an automotive polisher.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    Compounding sponge uses:

    COLOUR POLISH COMPOUND
    White Good Best
    Orange Good Best
    Red Best  
    Black Best  

    Compounding sponge range:

    ORDER NO. DENSITY COLOUR DIAMETER THREAD PATTERN
    SPC00101 Firm Orange ø200mm Hook & Loop Standard
    SPC00100 Soft Yellow ø200mm Hook & Loop Standard
    SPC00102 Soft Red ø200mm Hook & Loop Standard
    TCCS15058 Firm White ø150mm 5/8 UNC Standard
    TCCS15014-1 Firm White ø150mm M14 Standard
    TCCS15014-4 Firm White ø150mm M14 Standard
    TCCS15014 Firm Orange ø150mm M14 Standard
    TCC15014-2 Soft Red ø150mm M14 Standard
    TCCS15014-3 Soft Black ø150mm M14 Standard
    TCCS15014-5 Soft Black ø150mm M14 Waffle
    SPC00124 Firm Blue ø125mm Hook & Loop Standard

    NOTE:
    For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad

    SPC00106    .

    Adaptors to convert or lenghten the polisher’s thread:

    ORDER NO./td>

    		MALE THREAD FEMALE THREAD
    SPC00055 5/8 UNC 5/8 UNC
    SPC00053 5/8 UNC M14
    SPC00054 M14 5/8 UNC
    SPC00052 M14 M14
    Add to cartDone
  • Tork Craft White Buff/Mop 100Mm X 2 Section X 20Mm Thick

    Tork Craft White Buff/Mop 100Mm X 2 Section X 20Mm Thick

    R153,00

    Stitched buff


    Material:
    Cotton
    Width: 20mm
    Diameter: Ø100mm
    Sections: 2
    Bore: Ø1/2′
    Usage: Use with cutting compounds.

    Application:

    Different metals have varying characteristics. To achieve the best possible
    result, it is essential that the correct compound and polishing buff is selected
    for the job.

    The cutting compound should be used on a Sisal buff
    or stitched buff. A white stitched buff is ideal for cutting into
    metals. With the correct compound it will remove stretcher strains, orange peel,
    polishing wheel grit lines, light die marks etc.

    An unstitched buff is used with polishing (finishing) compound
    on metals. Each fold/leaf of
    material is approximately 1mm thick.

    The selection of compounds:

    ORDER NO. COLOUR DESCRIPTION WEIGHT

    RCC 20 – AB    		 RED General purpose medium cutting for
    brass, copper and silver.    		 +/- 1.2kg

    RCC 11 – SD    		 GREY Finishing compound for steel,
    stainless steel, chrome and aluminium.    		 +/- 1.3kg

    RCC 12 – S    		 BROWN Cutting and buffing compound for
    steel, stainless steel, chrome and aluminium.    		 +/- 1.4kg

    RCC 1 SDDB    		 WHITE Bright finishing compound for
    stainless steel.    		 +/- 1.5kg

    RCC G-13    		 LIGHT GREEN Cutting compound for stainless
    steel, aluminium and aluminium alloys.    		 900g

    RCC G-14    		 DARK GREEN Finishing compound for all kinds
    of metals.    		 900g

    RCC SW-1    		 PURPLE Cutting compound for stainless
    steel.    		 900g

    RCC SW-3    		 WHITE Cutting compound for stainless
    steel.    		 900g

    RCC SW-2000    		 YELLOW Cutting compound for copper,
    brass, aluminium, brass and steel    		 900g

    The selection of stitched buffs:

    ORDER NO. MATERIAL WIDTH DIAMETER SECTIONS BORE
    TCBF150-2C DENIM 30mm ø150mm 2 ø1/2′
    TCBF150-3C DENIM 30mm ø150mm 3 ø1/2′
    TCBF200-2C DENIM 20mm ø200mm 2 ø1/2′
    TCBF100-2W COTTON 20mm ø100mm 2 ø1/2′
    TCBF150-2W COTTON 20mm ø150mm 2 ø1/2′
    TCBF150-3W COTTON 30mm ø150mm 3 ø1/2′
    TCBF200-2W COTTON 20mm ø200mm 2 ø1/2′
    TCBF200-3W COTTON 30mm ø200mm 3 ø1/2′
    TCBF10030 Buffing wheel kit ø100mm Cotton, Denim
    & Sisal    		 ø1/2′
    TCBF15030 Buffing wheel kit ø150mm Cotton, Denim
    & Sisal    		 ø1/2′

    The selection of unstitched buffs:

    ORDER NO. MATERIAL WIDTH DIAMETER PLY BORE
    TCBF150-50W COTTON   ø150mm 50 ø1/2′
    TCBF200-50W COTTON   ø200mm 50 ø1/2′

     

    NOTE:
    Colour (denim) buffs are coarser than white (cotton) buffs.

    Add to cartDone
  • Tork Craft 6' 150Mm Polishing Bonnet Wool

    Tork Craft 6′ 150Mm Polishing Bonnet Wool

    R145,00

    Tie on polishing wool buff


    Diameter:     Ø150mm
    Use backing pad:
    TCBP150C

     Application:

    The polishing wool buff should be used with an automotive polisher.
    Different polishes and waxes can be used with the buff. The buff is fastened
    onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
    the same as the backing pad’s diameter.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    TIP:
    The buff is washable after use if the polishing compound is soluble.

    Tie on polishing wool buff range:

    ORDER NO. DIAMETER USE BACKING PAD
    MM4 ø100mm  

    MM5    		 ø125mm
    TCBP125C     /

    PG338

    MM6    		 ø150mm
    TCBP150C

    MM7    		 ø180mm
    PG33805

    MM7-2    		 ø180mm
    PG33805

    MM8    		 ø200mm  

    MM9    		 ø230mm  

    MM9-2    		 ø230mm  

    MM10    		 ø250mm  
    Add to cartDone
  • Tork Craft 5' 125Mm Polishing Bonnet Wool

    Tork Craft 5′ 125Mm Polishing Bonnet Wool

    R135,00

    Tie on polishing wool buff


    Diameter:     Ø125mm
    Use backing pad:
    TCBP125C / PG338

     Application:

    The polishing wool buff should be used with an automotive polisher.
    Different polishes and waxes can be used with the buff. The buff is fastened
    onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
    the same as the backing pad’s diameter.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    TIP:
    The buff is washable after use if the polishing compound is soluble.

    Tie on polishing wool buff range:

    ORDER NO. DIAMETER USE BACKING PAD
    MM4 ø100mm  

    MM5    		 ø125mm
    TCBP125C     /

    PG338

    MM6    		 ø150mm
    TCBP150C

    MM7    		 ø180mm
    PG33805

    MM7-2    		 ø180mm
    PG33805

    MM8    		 ø200mm  

    MM9    		 ø230mm  

    MM9-2    		 ø230mm  

    MM10    		 ø250mm  
    Add to cartDone
  • Tork Craft Compounding Sponge 150Mm X M14 Standard Orange

    Tork Craft Compounding Sponge 150Mm X M14 Standard Orange

    R121,00

    Compounding sponge


    Pattern:     Standard
    Density: Firm
    Colour: Orange
    Diameter: Ø150mm
    Thread/Hook & Loop: M14

     Application:

    The compounding sponge should be used with an automotive polisher.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    Compounding sponge uses:

    COLOUR POLISH COMPOUND
    White Good Best
    Orange Good Best
    Red Best  
    Black Best  

    Compounding sponge range:

    ORDER NO. DENSITY COLOUR DIAMETER THREAD PATTERN
    SPC00101 Firm Orange ø200mm Hook & Loop Standard
    SPC00100 Soft Yellow ø200mm Hook & Loop Standard
    SPC00102 Soft Red ø200mm Hook & Loop Standard
    TCCS15058 Firm White ø150mm 5/8 UNC Standard
    TCCS15014-1 Firm White ø150mm M14 Standard
    TCCS15014-4 Firm White ø150mm M14 Standard
    TCCS15014 Firm Orange ø150mm M14 Standard
    TCC15014-2 Soft Red ø150mm M14 Standard
    TCCS15014-3 Soft Black ø150mm M14 Standard
    TCCS15014-5 Soft Black ø150mm M14 Waffle
    SPC00124 Firm Blue ø125mm Hook & Loop Standard

    NOTE:
    For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad

    SPC00106    .

    Adaptors to convert or lenghten the polisher’s thread:

    ORDER NO./td>

    		MALE THREAD FEMALE THREAD
    SPC00055 5/8 UNC 5/8 UNC
    SPC00053 5/8 UNC M14
    SPC00054 M14 5/8 UNC
    SPC00052 M14 M14
    Add to cartDone
  • Tork Craft Buffing Pad - Medium 100Mm To Fit 12.5Mm Arbor/Spindle

    Tork Craft Buffing Pad – Medium 100Mm To Fit 12.5Mm Arbor/Spindle

    R120,00

    Buffing pad


    Buffing pad density:
    Medium
    Diameter: Ø100mm
    Bore: Ø12.5mm

    Application:

    The
    buffing pad is used together with a chuck adaptor spindle supplied with the

    TC874     polishing kits.

    Alternatively the

    TC336     arbor would also fit the buffing pad.

    How to use the compounds and the buffing pads:

    1. The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
      the correct buffing pad in the adaptor. Make sure the flanges are on both
      sides of the buffing pad.
    2. It would be best to use a drill press to polish metals. If a drill press
      is not accessible, use adaptor
      TCV01810 with a portable drill with a collar
      diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
    3. The buffing pad should revolve towards you at full speed. Pass the
      compound lightly across the face of the buffing pad. To ensure that the
      compound is evenly spread, hold a clean piece of scrap metal against the
      face of the buffing pad. This will eliminate lumps of compound from
      occurring.
    4. If desired, heat the item to 65°C using an oven or a heater. Warming
      the metal keeps the compound on the buffing pad. A cool item will draw
      compound from the pad and leave deposits. Use a glove to handle the warm
      item.
    5. Hold the metal lightly against the buffing pad. Allow the compound to do
      the work.
    6. If more compound is required, apply it using a wiping motion. Do not
      overload the buffing pad.

    Use Tork Craft’s line of buffing pads and compounds to clean, polish and
    bring to a high gloss, all metals and plastics.

      HEAVY DUTY CLEANING REGULAR CLEANING LIGHT POLISHING HIGH GLOSS POLISHING
    Hard metals 1 2 5 6
    Soft metals   3 5 6
    Precious metals   4 5 6
    Add to cartDone
  • Tork Craft 100Mm Diamond Wet Polishing Pad 3000 Grit Pink

    Tork Craft 100Mm Diamond Wet Polishing Pad 3000 Grit Pink

    R119,00

    TorkCraft – Wet Diamond Polishing Pad

    Grit: #3000






    Application:

    The Tork Craft wet diamond polish pads 100mm is for marble and granite,
    choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
    Recommended to use polishing machine, Tork Craft option POL 06

    • Ideal for both contractors and DIY users.
    • Suitable for wet use.
    • Hook & Loop back for fast pad change.
    • Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
      100mm x 5/8UNC
    • Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000

    Guide for usage

    1. Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
      the polisher, and attach the polishing pad to the backing pad. Set the speed
      at 3000 – 4000 RPM and start the polishing process.
    2. Moving two passes across and one pass up and down is a good technique.
      Make sure all prior scratches are removed before moving onto a higher grit.
      Reapeat the same process using all 7 pads to complete the polishing process.
      Polish from grit 50 – 3000 respectively. Do not skip.
    3. If you want to achieve the best polishing results on granite or other
      natural stones, use Buff Pad as the last step. Wet the workpiece and run the
      Buff pad semi-wet with very low water. When the water is consumed, the
      process is complete. Repeat as necessary to improve the look and achieve the
      mirror effect result.

    Steps by pad:

    Pad Grit
    1. Grey 50
    2. Yellow 150
    3. Orange 300
    4. Red 500
    5. Dark Green 1000
    6. Green 2000
    7. Pink 3000

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft 100Mm Diamond Wet Polishing Pad 2000 Grit Lime Green

    Tork Craft 100Mm Diamond Wet Polishing Pad 2000 Grit Lime Green

    R119,00

    TorkCraft – Wet Diamond Polishing Pad

    Grit: #2000






    Application:

    The Tork Craft wet diamond polish pads 100mm is for marble and granite,
    choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
    Recommended to use polishing machine, Tork Craft option POL 06

    • Ideal for both contractors and DIY users.
    • Suitable for wet use.
    • Hook & Loop back for fast pad change.
    • Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
      100mm x 5/8UNC
    • Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000

    Guide for usage

    1. Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
      the polisher, and attach the polishing pad to the backing pad. Set the speed
      at 3000 – 4000 RPM and start the polishing process.
    2. Moving two passes across and one pass up and down is a good technique.
      Make sure all prior scratches are removed before moving onto a higher grit.
      Reapeat the same process using all 7 pads to complete the polishing process.
      Polish from grit 50 – 3000 respectively. Do not skip.
    3. If you want to achieve the best polishing results on granite or other
      natural stones, use Buff Pad as the last step. Wet the workpiece and run the
      Buff pad semi-wet with very low water. When the water is consumed, the
      process is complete. Repeat as necessary to improve the look and achieve the
      mirror effect result.

    Steps by pad:

    Pad Grit
    1. Grey 50
    2. Yellow 150
    3. Orange 300
    4. Red 500
    5. Dark Green 1000
    6. Green 2000
    7. Pink 3000

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Foam Pad Hook And Loop White Sponge 150Mm 6' Cutting

    Tork Craft Foam Pad Hook And Loop White Sponge 150Mm 6′ Cutting

    R117,00


    Hook and Loop Foam Pad

    Action: Cutting
    Colour: White
    Classification: Standard (Yellow)

    <!-- -->

    This is a professional-grade foam pad engineered for cutting and the effective removal of various paint defects. The
    white color is a widely recognized industry indicator for an aggressive, yet balanced, medium-to-heavy cut foam..

    This pad provides substantial defect removal power while often leaving a slightly more refined finish compared to
    the most aggressive pads. It is ideally suited for tackling moderate to heavy swirl marks, light-to-medium
    scratches, and surface oxidation. It maintains the versatile 150mm (6 inches) diameter, ensuring broad compatibility
    with most professional rotary and dual-action polishing machines.

    A key feature is its reliable hook and loop backing, which allows for secure, rapid attachment and removal from the
    machine’s backing plate. This durable ‘sponge’ is built to withstand the friction and heat generated during
    correction work, ensuring consistent surface contact and maximum efficiency in leveling paint imperfections.

    Application:

    • Contractor
    • Fabrication
    • Automotive
    • Diy
    Add to cartDone
  • Tork Craft Foam Pad Hook And Loop Blue Sponge 150Mm 6' Heavy Polishing

    Tork Craft Foam Pad Hook And Loop Blue Sponge 150Mm 6′ Heavy Polishing

    R111,00


    Hook and Loop Foam Pad

    Action: Heavy Polishing
    Colour: Blue
    Classification: Standard (Yellow)

    <!-- -->

    This is a high-quality foam pad specifically designed for the critical stage of heavy polishing, which is focused on
    refining the paint finish following initial compounding. The blue color in the detailing industry generally
    signifies a soft, yet still effective, polishing foam.

    This pad is ideal for the removal of very light swirl marks, surface holograms, and any remaining compounding haze
    left behind by more aggressive pads. It ensures wide compatibility by maintaining the industry-standard 150mm (6
    inches) diameter, allowing for seamless use with most professional rotary and dual-action polishing machines.

    A dependable hook and loop backing is integrated for secure, quick, and easy pad changes. This durable ‘sponge’ is
    formulated to work optimally with medium-to-fine polishes, maximizing their effectiveness to create a deep, glossy,
    and uniform finish across every painted panel.

    Application:

    • Contractor
    • Fabrication
    • Automotive
    • Diy
    Add to cartDone
  • Tork Craft Foam Pad Yellow Finishing Sponge 200Mm 8'

    Tork Craft Foam Pad Yellow Finishing Sponge 200Mm 8′

    R109,00

    Compounding sponge


    Pattern:     Standard
    Density: Soft
    Colour: Yellow
    Diameter: Ø200mm
    Thread/Hook & Loop: Hook & Loop

     Application:

    The compounding sponge should be used with an automotive polisher.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    Compounding sponge uses:

    COLOUR POLISH COMPOUND
    White Good Best
    Orange Good Best
    Red Best  
    Black Best  

    Compounding sponge range:

    ORDER NO. DENSITY COLOUR DIAMETER THREAD PATTERN
    SPC00101 Firm Orange ø200mm Hook & Loop Standard
    SPC00100 Soft Yellow ø200mm Hook & Loop Standard
    SPC00102 Soft Red ø200mm Hook & Loop Standard
    TCCS15058 Firm White ø150mm 5/8 UNC Standard
    TCCS15014-1 Firm White ø150mm M14 Standard
    TCCS15014-4 Firm White ø150mm M14 Standard
    TCCS15014 Firm Orange ø150mm M14 Standard
    TCC15014-2 Soft Red ø150mm M14 Standard
    TCCS15014-3 Soft Black ø150mm M14 Standard
    TCCS15014-5 Soft Black ø150mm M14 Waffle
    SPC00124 Firm Blue ø125mm Hook & Loop Standard

    NOTE:
    For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad

    SPC00106    .

    Adaptors to convert or lenghten the polisher’s thread:

    ORDER NO./td>

    		MALE THREAD FEMALE THREAD
    SPC00055 5/8 UNC 5/8 UNC
    SPC00053 5/8 UNC M14
    SPC00054 M14 5/8 UNC
    SPC00052 M14 M14
    Add to cartDone
  • Tork Craft 4' 100Mm Polishing Bonnet Wool

    Tork Craft 4′ 100Mm Polishing Bonnet Wool

    R106,00

    Tie on polishing wool buff


    Diameter:     Ø100mm

     Application:

    The polishing wool buff should be used with an automotive polisher.
    Different polishes and waxes can be used with the buff. The buff is fastened
    onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
    the same as the backing pad’s diameter.

    It is necessary to polish a vehicle body panel when:

    • The panel has been newly painted with a clear-coat.
    • Shallow scratch marks need to be removed.
    • The panel has suffered from oxidation.
    • Swirl marks and hologram defects need to be removed.

    TIP:
    The buff is washable after use if the polishing compound is soluble.

    Tie on polishing wool buff range:

    ORDER NO. DIAMETER USE BACKING PAD
    MM4 ø100mm  

    MM5    		 ø125mm
    TCBP125C     /

    PG338

    MM6    		 ø150mm
    TCBP150C

    MM7    		 ø180mm
    PG33805

    MM7-2    		 ø180mm
    PG33805

    MM8    		 ø200mm  

    MM9    		 ø230mm  

    MM9-2    		 ø230mm  

    MM10    		 ø250mm  
    Add to cartDone
  • Tork Craft Foam Pad Hook And Loop Red Sponge 150Mm 6' Ultra Finishing

    Tork Craft Foam Pad Hook And Loop Red Sponge 150Mm 6′ Ultra Finishing

    R98,00


    Hook and Loop Foam Pad

    Action: Ultra Finishing
    Colour: Red
    Classification: Standard (Yellow)

    <!-- -->

    This is a premium-grade product: an ultra-soft foam pad specifically engineered for the ultimate stages of paint
    perfection and long-lasting protection. The red color is typically reserved in the industry for an extremely fine,
    non-abrasive foam, clearly designating it as an ultra-finishing pad.

    Its primary function is to be paired with waxes, sealants, and non-abrasive glazes, ensuring a mirror-like depth of
    gloss and a flawless, defect-free final surface. The pad maintains a versatile 150mm (6 inches) diameter, offering
    broad compatibility with virtually all professional rotary and dual-action polishing machines.

    Functionality is maximized by a reliable hook and loop backing system, which allows for secure and effortless pad
    changes. This ultra-gentle ‘sponge’ is guaranteed to provide maximum surface contact and uniform product application
    without creating any micro-marring, making it the perfect tool for achieving a concours-level show car finish.

    Application:

    • Contractor
    • Fabrication
    • Automotive
    • Diy
    Add to cartDone
  • Tork Craft Cotton Buff Replacement 100Mm Carded

    Tork Craft Cotton Buff Replacement 100Mm Carded

    R93,00

    Buffing pad


    Buffing
    pad material:
    Cotton
    Diameter: Ø100mm
    Bore: Ø6.0mm

    Application:

    The buffing pad is
    not supplied with a chuck adaptor spindle.

    TC335     is an arbor with a ø6.0mm shaft available for the buffing pad.

    It is ideal for buffing jewelry and other metals. The concentrically sewn
    sections add strength to the buffing pad and it cleans surfaces without damaging
    it.

    How to use the compounds and the buffing pads:

    1. The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
      the correct buffing pad in the adaptor. Make sure the flanges are on both
      sides of the buffing pad.
    2. It would be best to use a drill press to polish metals. If a drill press
      is not accessible, use adaptor
      TCV01810 with a portable drill with a collar
      diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
    3. The buffing pad should revolve towards you at full speed. Pass the
      compound lightly across the face of the buffing pad. To ensure that the
      compound is evenly spread, hold a clean piece of scrap metal against the
      face of the buffing pad. This will eliminate lumps of compound from
      occurring.
    4. If desired, heat the item to 65°C using an oven or a heater. Warming
      the metal keeps the compound on the buffing pad. A cool item will draw
      compound from the pad and leave deposits. Use a glove to handle the warm
      item.
    5. Hold the metal lightly against the buffing pad. Allow the compound to do
      the work.
    6. If more compound is required, apply it using a wiping motion. Do not
      overload the buffing pad.

    Use Tork Craft’s line of buffing pads and compounds to clean, polish and
    bring to a high gloss, all metals and plastics.

      HEAVY DUTY CLEANING REGULAR CLEANING LIGHT POLISHING HIGH GLOSS POLISHING
    Hard metals 1 2 5 6
    Soft metals   3 5 6
    Precious metals   4 5 6
    Add to cartDone
  • Aircraft Microfibre Cloth Blue 3Pc 300Mm X 300Mm 200Gsm

    Aircraft Microfibre Cloth Blue 3Pc 300Mm X 300Mm 200Gsm

    R29,00

    MICROFIBRE CLOTH – BLUE (3 Pack) | 300mm x 300mm | 200GSM

    Product Code: SG SPC00101
    Colour: Blue
    Quantity: 3 Cloths per Pack
    Dimensions: 300mm x 300mm each
    Material Weight: 200 GSM (Grams per Square Meter)
    Fabric Composition: 80% Polyester / 20% Polyamide

    Product Overview:

    Experience powerful, streak-free cleaning with this high-performance Microfibre Cloth Blue 3PC Set.
    Designed for both professional and household use, these cloths deliver exceptional cleaning efficiency thanks
    to their dense 200GSM construction and ultra-fine microfibre weave.

    Each cloth measures 300mm x 300mm — perfect for everyday tasks such as polishing, dusting, drying, or wiping down surfaces.
    Their vibrant blue colour allows easy colour-coding to avoid cross-contamination in kitchens, bathrooms, cars, or workspaces.

    Key Features:

    • Ultra-Soft & Non-Abrasive: Safe for use on delicate surfaces including glass, chrome, stainless steel, paintwork, and electronics.
    • Highly Absorbent: Absorbs up to 7 times its weight in liquids—perfect for spills and wet surfaces.
    • Lint-Free & Streak-Free Finish: Ideal for mirrors, windows, screens, and vehicle detailing.
    • Durable & Reusable: Machine washable and reusable hundreds of times without losing shape or effectiveness.
    • Fast-Drying Fabric: Quick-dry microfibre resists mildew and odours, ensuring longer life and better hygiene.
    • Multipurpose Use: Suitable for automotive, household, office, industrial, and janitorial applications.

    Suggested Applications:

    • Car washing and detailing (interior and exterior)
    • Kitchen and countertop cleaning
    • Dusting furniture and electronics
    • Cleaning windows, mirrors, and stainless steel
    • Bathroom and sink maintenance
    • Office cleaning – monitors, keyboards, phones

    Care Instructions:

    • Machine wash cold or warm
    • Do not use fabric softener or bleach
    • Tumble dry low or hang dry
    • Avoid ironing

    Whether you’re detailing a vehicle, wiping down glass, or giving your workspace a shine, this
    Microfibre Cloth Blue 3PC 200GSM Set offers a reliable, eco-friendly, and cost-effective
    cleaning solution that outperforms ordinary cloths.

    Add to cartDone

Powered by
►
Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.
None
►
Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.
None
►
Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.
None
►
Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.
None
Powered by