“Tork Craft Nibbler Attachment For Drills For Cutting Sheet Metals” has been added to your cart.
View cart
Showing 1–16 of 59 resultsSorted by latest
-
R2 628,00
Tork Craft Heavy Duty Vice 125 mm – Bench-Mounted Clamping Power
At a Glance: 125 mm heavy-duty bench vice for everyday workshop use
The Tork Craft TCV11125 Heavy Duty Vice 125 mm is designed to keep your workpiece rock solid while you focus on accurate cutting, drilling, grinding or filing. Once bolted to the bench, it becomes your dependable extra pair of hands, gripping steel, timber, plastic and more with firm, even pressure. With its robust construction, sturdy jaws and smooth screw action, this vice is well suited to home users, maintenance teams and busy workshops that demand reliable clamping day after day.
Heavy-duty construction for confident clamping
This vice is part of the Tork Craft hand tools range, built to handle demanding workshop conditions. The solid body, strong jaws and positive screw mechanism provide stable holding power, whether you are fabricating brackets, cutting threaded rod or securing material for drilling and finishing work.
-
R2 536,00
Tork Craft Router Table with Fence & Feather Board — for 16 cm Base Routers (Model RT001)
The Tork Craft RT001 Router Table transforms your handheld router into a stationary precision workstation. It provides a stable flat surface, adjustable fence, and feather boards for accurate and repeatable routing tasks such as edge shaping, grooving and joinery. Designed to fit most 16 cm base routers, this compact yet sturdy table is perfect for DIY and professional workshops.
-
R1 781,00
Tork Craft Heavy Duty Vice 100 mm – Bench-Mounted Clamping Power
At a Glance: 100 mm heavy-duty bench vice for everyday workshop use
The Tork Craft TCV11100 Heavy Duty Vice 100 mm is built to keep your workpiece rock steady while you do the noisy, messy, accurate stuff. Bolt it to your bench and it becomes the third hand you always wish you had – gripping steel, timber, plastic and more while you drill, cut, file, grind or assemble. The robust construction, sturdy jaws and smooth screw action make it a reliable choice for home users, small workshops and busy maintenance teams alike.
Heavy-duty construction for confident clamping
This vice forms part of the Tork Craft hand tools range, designed for hard-working environments where tools are expected to last. The solid body, strong jaws and positive screw mechanism help you clamp with confidence, whether you are fabricating metal brackets, cutting threaded rod or holding timber while you fit hardware.
-
R1 635,00
Tork Craft Drill Press Vice 100mm
At a Glance: 100 mm jaw width low-profile drill press vice for stable, accurate drilling
The Tork Craft Drill Press Vice 100mm (Model TCV13100) is a compact, low-profile vice designed to hold your workpiece securely on a drill press table or pillar drill. With 100 mm wide jaws and a sturdy cast-iron body, it keeps metal, plastic or timber stock firmly in place so you can drill straight, repeatable holes with confidence. Slotted base holes make it easy to align and bolt the vice to most drill press tables, while the precision-machined jaws and screw provide smooth clamping action and a solid grip.
Rigid 100mm drill press vice for precise, repeatable drilling
This drill press vice is built to handle everyday workshop and DIY drilling tasks – from drilling flat bar and angle iron to small blocks, brackets and timber components. The robust cast-iron construction resists flex under load, helping the drill bit stay on line, while the compact footprint suits smaller drill press tables and benchtop machines. It is a simple, dependable workholding solution that quickly becomes a permanent resident on your drill press table.
-
R1 011,00
Tork Craft Saw Horse Steel Trestle 900mm x 730mm Foldable Single Frame
Highlights: 900mm wide top, 730mm height, steel frame, fold-flat design for storage and transport.
The Tork Craft Steel Trestle Saw Horse is built for serious use: whether you’re framing walls, cutting timber off-site, or organising a make-shift saw bench in your workshop, the 900 mm width gives plenty of support across large boards and sheets, while the 730 mm height sits comfortably at working level for most tradespeople. Its steel construction offers durability and stability under load, and the foldable single-frame design means you can move it easily between job-sites or store it flat when not in use.
Sturdy steel trestle-style sawhorse with job-site convenience
A dependable stand for large-scale cutting, framing, sheet material support and mobile workstations where strength and portability both matter.
-
R1 062,00
Carded Pack: Qty 1
Application:
Sheet metal cutters allows for cutting straight or irregular shapes into sheet metal stainless steel and other soft materials with a standard electric drilling machine, cordless drill or pneumatic drill.
- Fits any electric drill or cordless drill.
- Different cutting shapes achievable – straight / curve / 360°
- Recommended cutting speed 3000RPM
- For sheet metal cutting: Sheet Metal 1.8mm MAX. / Stainless steel 1.2mm
MAX,
- For other material cutting: Aluminium 2.0mm MAX. / Plastic or Plywood
2.0mm MAX.
Working Safe:
- Ensure the work piece is clamped and secured before cutting.
- Fit any electric drill or cordless drill to the 1/4′ hex drive shaft.
- Do not cut a thicker sheet of material than stipulated.
- Never start cutting before the tool is running at the set speed.
- Keep a vertical angle between the cutting bit and the sheet
- Finish cutting through material before stopping your drilling machine,
- Make sure the plastic handle is screwed over the cutter (not in use) to
allow for a safe grip
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. The tool can get hot after use, cutting edges can be
very sharp.
-
R839,00
Carded Pack: Qty 1
Application:
Sheet metal cutters allows for cutting straight or irregular shapes into sheet metal stainless steel and other soft materials with a standard electric drilling machine, cordless drill or pneumatic drill.
- Fits any electric drill or cordless drill.
- Different cutting shapes achievable – straight / curve / 360°
- Recommended cutting speed 3000RPM
- For sheet metal cutting: Sheet Metal 1.8mm MAX. / Stainless steel 1.2mm
MAX,
- For other material cutting: Aluminium 2.0mm MAX. / Plastic or Plywood
2.0mm MAX.
Working Safe:
- Ensure the work piece is clamped and secured before cutting.
- Fit any electric drill or cordless drill to the 1/4′ hex drive shaft.
- Do not cut a thicker sheet of material than stipulated.
- Never start cutting before the tool is running at the set speed.
- Keep a vertical angle between the cutting bit and the sheet
- Finish cutting through material before stopping your drilling machine,
- Make sure the plastic handle is screwed over the cutter (not in use) to
allow for a safe grip
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. The tool can get hot after use, cutting edges can be
very sharp.
-
R759,00
Clamping
length:
1000mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
- Wood assembly and joinery (screws, glue, biscuits).
- Clamping down edging to board material.
Use in metalworking:
- Holding pieces together for welding.
- Holding and aligning pieces together for drilling and bolting.
Other uses:
- Securing workpieces to a bench or a template.
Features:
- Non-marking pressure pads to prevent surface damage.
- All steel construction ensures durability and added strength.
- Wooden handle for added grip.
-
R720,00
Total
length:
600mm
Rail: Cold-drawn high carbon steel
Jaws: Powder coated malleable cast iron
Spindle: Steel
Application:
Sash clamps can be used in many different industries. Cabinetry shops and other
establishments where wood furniture is constructed often make use of sash clamps as part of the manufacturing process.
Around the house, sash clamps can
be used to make repairs on furniture. Because the clamps come in many different sizes, it is
possible to purchase the correct clamp length for both small and large projects.
-
R677,00
Clamping
length:
800mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
- Wood assembly and joinery (screws, glue, biscuits).
- Clamping down edging to board material.
Use in metalworking:
- Holding pieces together for welding.
- Holding and aligning pieces together for drilling and bolting.
Other uses:
- Securing workpieces to a bench or a template.
Features:
- Non-marking pressure pads to prevent surface damage.
- All steel construction ensures durability and added strength.
- Wooden handle for added grip.
-
R499,00
Jaw width: 95mm
Opening: 68mm
A corner clamp is a tool used to hold two pieces of material at a precise 90-degree angle, facilitating accurate and stable assembly.
It can be used for framing or light weight joinery. The swivelling head applies even force when clamping two different widths of timber at 90°.
Application:
- DIY
- Wood working
- Picture Frame Holding
- Workshop
-
R572,00
Clamping
length:
500mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
- Wood assembly and joinery (screws, glue, biscuits).
- Clamping down edging to board material.
Use in metalworking:
- Holding pieces together for welding.
- Holding and aligning pieces together for drilling and bolting.
Other uses:
- Securing workpieces to a bench or a template.
Features:
- Non-marking pressure pads to prevent surface damage.
- All steel construction ensures durability and added strength.
- Wooden handle for added grip.
-
R566,00
Tork Craft Finger Plate / Dovetail — ½″ Model FUDT300-2
This precision-machined ½″ finger or dovetail plate is intended for use with the DT300 series dovetail system. It ensures accurate alignment, smooth sliding motion, and reliable assembly for sliding dovetail joints, knock-down fittings, or adjustable fixtures.
-
R608,00
Industrial Quality
5/8"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
R608,00
Industrial Quality ½"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
R608,00
Industrial Quality
3/8"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
Mazda oil pump SPLINED DRIVE