“Tork Craft U-Shank Jigsaw Blade 12Tpi Metal 2Mm 2Pc” has been added to your cart.
View cart
Showing 2401–2416 of 4680 resultsSorted by latest
-
R46,00
AirCraft PU Hose Fitting Tee 10mm x 10mm x 1/8" BSP (SG APD10-01)
At a Glance; 10 mm tube tee with 1/8" BSP male thread for neat, compact air line branching
The AirCraft SG APD10-01 PU Hose Fitting Tee 10mm x 10mm x 1/8" BSP is a smart hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into a threaded port at the same time. With two 10 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating tubing runs into gauge blocks, compact valves, small manifolds and control components—keeping your air layout tidy, reliable and easy to maintain.
Hybrid tee: push-in tubing plus 1/8" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air system.
-
R46,00
AirCraft Reducing Manifold Brass 1/4" x 3/8" F/F (SB1249)
At a Glance: 1/4" to 3/8" female-to-female brass reducing manifold for stepping between air-line sizes
Air systems love mixing standards—right when you don’t have time for it. The AirCraft SB1249 brass reducing manifold is the tidy solution, giving you
a female-to-female (F/F) connector that steps from 1/4" to 3/8". It’s ideal for adapting mismatched pneumatic components on compressors,
regulators, filters, manifolds and general compressed-air plumbing without building an awkward stack of adaptors. Made from durable, corrosion-resistant
brass, it’s built for workshop reliability and a cleaner, more serviceable air-line layout.
AirCraft Brass Fittings – Neat Size Changes, Less Hassle
AirCraft brass fittings are designed for dependable compressed-air connections where sealing and longevity matter.
This reducing manifold bridges two common sizes in one compact, purpose-made connector.
-
R46,00
For use with random orbital sanders.
SIZE:
ø115mm
GRIT: P240
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R46,00
For use with random orbital sanders.
SIZE:
ø115mm
GRIT: P180
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R46,00
For use with random orbital sanders.
SIZE:
ø115mm
GRIT: P80
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R46,00
For use with random orbital sanders.
SIZE:
ø115mm
GRIT: P40
ABRASIVE: Aluminium oxide
HOLES: No
Application:
High performance sanding disc for dry finishing on wood or
steel. The hook and loop allows for quick sanding disc change.
Easy to use:
- Unplug the sander before attaching the sheet.
- Align the sanding sheet onto the clean backing pad and press in place.
- Keep the sander flat on the surface with light even pressure during
sanding.
- Replace the sanding disc when it is worn.
-
R46,00
Torx
Tip #:
T7
Length: 75mm
Application:
The screwdriver is designed to be ergonomic and wear resistant. The tip has
been hardened for optimum durability.
Torx sizes available:
T5 x 75mm –
TC16045
T6 x 75mm –
TC16046
T7 x 75mm –
TC16047
T8 x 75mm –
TC16048
T9 x 75mm –
TC16049
T10 x 100mm –
TC16050
T15 x 100mm –
TC16051
T20 x 100mm –
TC16052
T25 x 100mm –
TC16053
T27 x 100mm –
TC16054
T30 x 100mm –
TC16055
T40 x 115mm –
TC16056
-
R46,00
Size : 7MM
Application:
The Tork Craft Offset combination spanners features an anti-slip design open
ended and closed ring profile, it has an offset angle for usage in confined
spaces, for automotive, DIY, construction & manufacturing
- Anti-slip design
- Open ended and closed ring profile
- Offset angle for usage in confined spaces
-
R46,00
Tork Craft Arbor Drill Bit — 6 × 43 mm (for HSS Hole Saws)
Size: 6 mm diameter × 43 mm length
This Tork Craft arbor drill bit (Cat No. TC28650) is tailored to act as the pilot bit for HSS hole saws in the TC280 series. It features a 6 mm diameter shank and 43 mm overall length to accurately guide and stabilise HSS hole saws during clean and precise cutting through metal sheets and similar substrates.
-
R46,00
Shank:
U-shank
Distance between teeth: 1.2mm
Total length: 77mm
Teeth Per Inch: 21TPI
Packaging: Pack of 2
Application:
The jigsaw blades are used to cut:
- Sandwich panels (alucobond, dibond) 2-5mm.
- Aluminium sheet metal up to 5mm.
Compatibility:
- RYOBI
- HITACHI
- BLACK&DECKER
- DEWALT
- MAKITA
- SKIL
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
NOTICE:
The blades are long life blades.
-
R46,00
Works with Kit NR8012 or NR5012
Thread length: 12 mm
Qty: 5 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R46,00
AirCraft Hose Tail Connector Brass – 1/4" Female x 10mm (SBF1259)
At a Glance: 1/4" Female Thread to 10mm Hose Tail in Solid Brass
When your air line setup calls for a slightly larger hose, the AirCraft SBF1259 gives you a clean, dependable connection between a 1/4" female threaded port
and a 10mm hose. The hose tail (barb) design helps the hose grip firmly from the inside, while the threaded end makes it easy to integrate into common pneumatic
and compressed air systems. Ideal for workshops, compressor lines, and custom hose builds where reliability matters.
Solid-brass AirCraft connector for secure 10mm hose-to-threaded joins
A practical fitting for everyday use: push the hose fully onto the 10mm tail, clamp it correctly, then thread the 1/4" female side onto a compatible adaptor,
coupler, regulator or manifold. Brass offers good corrosion resistance and keeps connections service-friendly over time.
-
R45,00
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving the finish of the product and removing any
hazardous sharp edges.
Regardless
of the name given to the cutter, the surface being generated may be a conical
chamfer (plunging applications) or a beveled corner for the intersection of two
planes (traversing applications).
These Tork Craft carbon countersinks are referred to as fluted countersinks and
mainly suitable for wood
Application:
- DIY
- Construction
- Deburring, smoothing holes in steel, plastics and wood plate.
Made in China to Tork Craft specifications
-
R45,00
Size: T60
Drive: 3/8 inch
Application:
The Fixman 3/8 drive bit sockets are used with a torque wrench to tighten fasteners to required specifications, made of high-quality chrome vanadium steel. Has an increased contact area with a micro finish.
- Made of high-quality chrome vanadium steel
- Increased contact area
- CR-V steel body
- Micro finish
-
R45,00
Size: H10
Drive: 3/8 inch
Application:
The Fixman 3/8 drive bit sockets are used with a torque wrench to tighten fasteners to required specifications, made of high-quality chrome vanadium steel. Has an increased contact area with a micro finish.
- Made of high-quality chrome vanadium steel
- Increased contact area
- CR-V steel body
- Micro finish
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
