“Tork Craft Plastic Square Abs 80X50X12Mm 4Pc” has been added to your cart.
View cart
Showing 3217–3232 of 4681 resultsSorted by latest
-
R110,00
Size: 16 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R109,00
FIXMAN combination wrenches are made of durable chrome vanadium steel.
The design includes a non-slip surface and micro finish. Available in sizes 6 to 32mm. This product complies with the
DIN 3113 standard.
STANDARD by Deutsches Institut Fur Normung E.V. (German National Standard).
-
R109,00
Tork Craft Nylon Cup Brush 75 × 6 mm
Highlights: 75 mm diameter cup brush with 6 mm shank; tough nylon bristles for effective cleaning and surface finishing
The Tork Craft Nylon Cup Brush 75 × 6 mm is designed to tackle surface cleaning, deburring and the removal of paint or rust from metal, plastic or wood in workshop and fabrication settings. The larger 75 mm diameter gives you more coverage per pass, and the 6 mm shank fits most standard bench grinders, rotary tools and angle adapters.
Its nylon bristles strike the right balance between aggressiveness and surface friendliness—removing coatings and deposit buildup while preserving the substrate underneath. Ideal for workshop prep, maintenance cleanup, light rust removal or smoothing weld seams without leaving deep scratch marks.
-
R109,00
Tork Craft Number Punch Set 6mm (0-9mm) Black Finish
Highlights: Set of 10 number punches (0-9) at 6mm size with black finish
The Tork Craft Number Punch Set 6mm (0-9mm) Black Finish provides a complete range of digits for reliable, consistent marking of all parts from zero through nine. The black-finished steel punches are engineered to offer durability and clean impressions on metal, wood or plastic surfaces.
With each punch precisely sized at 6mm and clearly labelled, this set makes identification marking, tagging or serial stamping straightforward and efficient. The black finish helps reduce glare and improve visibility of the punch-faces, while the high-quality steel construction stands up to repeated use in workshop or fabrication environments.
-
R109,00
Size: 24 mm
Shank: 1/2 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R109,00
Size: 23 mm
Shank: 1/2 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
- To be used wirth powered impact wrenches or drivers
- The combination of an impact wrench and impact socket can deliver
greater torque to the head of a fastner than can be achieved with a manual
wrench
- Sockets are hardened abd tempered
- Hardened to 40 – 50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R109,00
Pattern: Standard
Density: Soft
Colour: Yellow
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR |
POLISH |
COMPOUND |
| White |
Good |
Best |
| Orange |
Good |
Best |
| Red |
Best |
|
| Black |
Best |
|
Compounding sponge range:
| ORDER NO. |
DENSITY |
COLOUR |
DIAMETER |
THREAD |
PATTERN |
|
SPC00101 |
Firm |
Orange |
ø200mm |
Hook & Loop |
Standard |
|
SPC00100 |
Soft |
Yellow |
ø200mm |
Hook & Loop |
Standard |
|
SPC00102 |
Soft |
Red |
ø200mm |
Hook & Loop |
Standard |
|
TCCS15058 |
Firm |
White |
ø150mm |
5/8 UNC |
Standard |
|
TCCS15014-1 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014-4 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014 |
Firm |
Orange |
ø150mm |
M14 |
Standard |
|
TCC15014-2 |
Soft |
Red |
ø150mm |
M14 |
Standard |
|
TCCS15014-3 |
Soft |
Black |
ø150mm |
M14 |
Standard |
|
TCCS15014-5 |
Soft |
Black |
ø150mm |
M14 |
Waffle |
|
SPC00124 |
Firm |
Blue |
ø125mm |
Hook & Loop |
Standard |
NOTE:
For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher’s thread:
-
R109,00
AirCraft Nipple Brass 3/4×3/4 Male/Male (SB1216P (Packaged))
At a Glance: Brass nipple adaptor with 3/4 x 3/4 male/male threads for larger compressed-air connections.
The AirCraft SB1216P (Packaged) brass nipple is a robust adaptor designed to join two female-threaded pneumatic components with matching 3/4 x 3/4 thread sizes.
With male/male threads, it’s ideal for workshop air distribution, compressor plumbing, manifolds and higher-flow air system hardware where a strong, reliable threaded connection matters.
Brass construction offers durability and corrosion resistance, helping keep larger air line connections leak-resistant, service-friendly and dependable over time.
A strong male/male connector for main-line compressed-air plumbing
When you’re working with 3/4 fittings, you’re usually in the “main air line†territory—flow, reliability and leak control become very important. The SB1216P (Packaged) gives you a straightforward, sturdy join without unnecessary adaptors.
-
R109,00
Tork Craft Zirconium Sanding Belts — 100 × 610 mm, 100 Grit (2-Pack)
The 100-grit zirconium belt is your smoothing workhorse—aggressive enough to remove marks but refined enough to transition into finer grit stages. With the 100 × 610 mm standard size, it fits most belt sanders. The zirconium grain provides extended cutting life and cooler operation, making these belts ideal for both woodworking and paint/metal prep tasks.
-
R109,00
Tork Craft Job Saw 150mm 7TPI 1.2mm Temp. Blade ABS Handle
Highlights: 150 mm blade length, 7 teeth per inch (TPI), 1.2 mm tempered steel blade and ABS handle for comfortable control.
The Tork Craft Job Saw offers a reliable solution for everyday cutting tasks around the workshop, site or home. With its 150 mm blade and 7 TPI count it balances speed and finish, making it suitable for general timber cutting, light carpentry, trim work and DIY uses. The 1.2 mm tempered blade provides good strength and straight cutting performance, while the ABS handle gives a comfortable grip and steady control as you push through your cuts.
Versatile utility hand saw with tempered blade and ergonomic handle
Designed to handle a broad range of wood-cutting applications without the bulk of longer saws.
-
R109,00
SCREWDRIVER INSULATED SQUARE NO 2X100MM
-
R109,00
Tork Craft 6-pc Double-Ended Bit Set — 45 mm (PH/PZ/Slotted)
Packaging: Carded (for retail display)
A compact, do-most fastener kit for installers and workshop use. Each 45 mm bit is double-ended, so you get two working tips per bit and quick flips on the job. Coverage includes popular Pozidriv, Phillips, and slotted sizes for cabinets, hardware, electrics, and general assembly.
-
R109,00
The Tork Craft Plastic Square ABS is a versatile and essential tool for woodworking, carpentry, and DIY projects.
Crafted from high-quality ABS plastic, this square offers durability, accuracy, and lightweight convenience. Its
precise measurements and sturdy construction make it ideal for both professional tradespeople and hobbyists.
Application:
- DIY
- Assembly
- Woodworking
- Manufacturing
-
R109,00
AirCraft Metal PU Fitting T-Joint 8mm x 3/8′ Male (SG MPT08-03)
At a Glance; 8mm push-in T fitting with a 3/8" male threaded branch for clean air line splitting.
The AirCraft SG MPT08-03 Metal PU Fitting T-Joint is a compact, workshop-ready way to add a branch connection to an 8mm pneumatic line—especially when you need a larger 3/8" threaded port. It connects two 8mm pneumatic/PU tubes in-line and provides a 3/8" male threaded outlet for a secondary connection, ideal for manifolds, valves, regulators, gauges or auxiliary air lines. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy, serviceable and reliably sealed.
Branch your 8mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a larger threaded port for accessories or branch connections.
-
R109,00
AirCraft Metal PU Fitting Elbow 12mm x 1/4′ Male (SG MPL12-02)
At a Glance; Compact 90° elbow with 12mm push-in tube connection and 1/4" male thread.
The AirCraft SG MPL12-02 Metal PU Fitting Elbow is a tidy, workshop-ready connector for turning a 12mm pneumatic line into a common 1/4" threaded port—without bulky bends or messy routing. It connects 12mm pneumatic/PU tubing to a 1/4" male threaded outlet, giving you a clean 90° turn where space is tight and a neat installation matters. Ideal for compressed-air systems on regulators, manifolds, valves, cylinders and general pneumatic equipment, this metal elbow helps keep air lines secure, organised and leak-resistant.
Reliable 90° AirCraft metal push-in elbow fitting for 12mm tube
Designed for compact pneumatic layouts, this elbow connector keeps routing clean while providing a strong threaded connection to your air system components.
-
R109,00
AirCraft Metal PU Fitting Elbow 12mm x 1/8′ Male (SG MPL12-01)
At a Glance; Compact 90° elbow with 12mm push-in tube connection and 1/8" male thread.
The AirCraft SG MPL12-01 Metal PU Fitting Elbow is a tidy connector that makes routing a larger 12mm pneumatic line around corners simple and secure. It joins 12mm pneumatic/PU tubing to a 1/8" male threaded port, giving you a clean 90° turn where straight fittings won’t fit. Ideal for compressed-air systems on regulators, manifolds, valves, cylinders and general pneumatic equipment, this metal elbow helps keep air lines organised, secure and leak-resistant in tight installations.
Reliable 90° AirCraft metal push-in elbow fitting for 12mm tube
Designed for compact pneumatic layouts, this elbow connector keeps routing clean while providing a strong threaded connection to your air system components.
