“Tork Craft Holesaw Hss 13Mm” has been added to your cart.
View cart
Showing 17–32 of 65 resultsSorted by latest
-
R298,85
Hole saw diameter:
ø57mm
Use mandrel:
TC17007-2
Application:
The hole saw’s cup design is manufactured from a special alloy steel and the
cutting edges are Tungsten Carbide gritted. It is specially designed to drill
into abrasive materials.
The hole saw can be used to cut into:
- Fiberglass
- Kevlar
- Asbestos
- Graphite
- Carbon
- Brick
- Tiles
- Plaster slabs
- Walls
- Light stones
- Weatherboard
IMPORTANT:
Do not use with hammer/percussion action or to drill into concrete.
-
R295,20
Hole saw diameter:
ø121mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R271,95
Hole saw diameter:
ø111mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R255,65
Hole saw diameter:
ø105mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R241,10
Hole saw diameter:
ø42mm
Application:
The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.
The hole saw can be used to cut into:
- Mild steel
- Cast iron
- Copper
- Aluminium
- Brass
- Alloy steel
- Fibre-reinforced plastic (FRP)
The pilot drill bits are available separately:
-
R237,65
Hole saw diameter:
ø98mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R221,95
Hole saw diameter:
ø92mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R72,00
Drill bit diameter: Ø6.35mm
Application:
The drill bit is a replacement pilot drill bit for Diamond coated hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R70,00
Hole saw diameter:
ø27mm
Use mandrel:
TC17002
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R67,00
Drill bit diameter: Ø6.35mm
Drill bit: HSS (High-speed steel)
Application:
The drill bit is a replacement pilot drill bit for Bi-metal hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R67,00
Hole saw diameter:
ø13mm
Application:
The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.
The hole saw can be used to cut into:
- Mild steel
- Cast iron
- Copper
- Aluminium
- Brass
- Alloy steel
- Fibre-reinforced plastic (FRP)
The pilot drill bits are available separately:
-
R63,00
Hole saw diameter:
ø24mm
Use mandrel:
TC17002
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R62,00
Hole saw diameter:
ø21mm
Use mandrel:
TC17002
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R62,00
Pilot drill bit size: Ø8 x 60mm
Application:
Use the replacement pilot drill bit for the
TC280 range of hole saws.
Make sure to choose the correct pilot drill bit for the corresponding HSS hole
saw.
The pilot drill bits for HSS hole saws:
Ø6 x 50mm pilot drill bit –
TC28650
Ø8 x 60mm pilot drill bit –
TC28860
-
R61,00
Hole saw diameter:
ø12mm
Application:
The HSS (hi-speed steel) hole saw is uniquely designed for cutting holes in sheet metals up to
3mm in thickness.
The hole saw can be used to cut into:
- Mild steel
- Cast iron
- Copper
- Aluminium
- Brass
- Alloy steel
- Fibre-reinforced plastic (FRP)
The pilot drill bits are available separately:
-
R61,00
Hole saw diameter:
ø22mm
Use mandrel:
TC17002
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
